CalcUnit Logo

Potential Energy Calculator

What is the Potential Energy Calculator?

What this calculator does

Enter a mass, a height, and a gravity value. The calculator returns one number: the gravitational potential energy stored in the object, in joules. That is the whole scope. Spring energy, chemical energy, and orbital energy are different models, and none of them is computed anywhere on this page.

The formula is a single multiplication

Potential Energy (PE) equals Mass (m) x Gravitational Acceleration (g) x Height (h). Double any one of the three inputs and the answer doubles. Triple the height and the stored energy triples. Nothing is squared, rooted, or logged, which makes this one of the most predictable formulas in physics.

Where the formula comes from

Lifting an object means working against its weight. Weight is a force, mass x gravity, and work equals force x distance moved. Raise a mass m through height h at steady speed and you do m x g x h joules of work, which the object keeps as potential energy.

The gravity default is the standard value

The Gravitational Acceleration (g) field opens at 9. 80665 meters per second squared. That is standard gravity, the exact conventional value adopted internationally and listed by NIST, chosen so results match textbooks. Real surface gravity varies slightly with latitude and altitude, but for nearly every purpose 9. 80665 is the right input.

You can change gravity for other worlds

Because g is an ordinary input, the same mass and height can be priced anywhere. Use about 1. 62 for the Moon and 3. 71 for Mars. The Moon figure is roughly one sixth of Earth's, which is why the same raised toolbox stores far less energy there.

Mass accepts pounds as well as kilograms

The unit menu beside Mass (m) offers Kilograms (kg) and Pounds (lbs). Pounds convert with the exact international factor, 1 pound = 0. 453592 kilograms, the definition maintained through NIST. A 150 pound person is 68. 0388 kilograms inside the formula, whatever the menu shows on screen.

Height accepts feet as well as meters

The unit menu beside Height (h) offers Meters (m) and Feet (ft), converted at exactly 0. 3048 meters per foot. A 12 foot ladder is 3. 6576 meters inside the formula. The answer always comes out in joules; only the two input units are yours to choose.

Height is measured from a level you choose

Potential energy has no absolute zero. A book on a table holds energy relative to the floor, more relative to the basement, and none relative to the tabletop. Pick the level the object would fall to, measure height from there, and the result is the energy that fall can release.

Worked example: the page default

Leave Mass (m) at 10 kilograms, Height (h) at 5 meters, and gravity at 9. 80665. The calculator returns Potential Energy (PE) of 490. 3325 joules. That is the energy the mass would release falling the full 5 meters, or the work a motor must do to lift it back.

Worked example: a brick on scaffolding

Set mass to 2 kilograms and height to 10 meters, with Earth gravity. A standard brick hoisted two stories stores 196. 1330 joules. Small as that sounds, it is the energy the brick delivers on impact if it slips, which is why hard hats are mandatory below scaffolding.

Worked example: a climber in imperial units

Choose Pounds (lbs) and enter 150 for mass, then choose Feet (ft) and enter 12 for height. The calculator converts both and returns 2,440. 4703 joules for a climber standing on top of a 12 foot wall. Imperial inputs, metric internals, joules out: no manual conversion is needed.

Worked example: equipment on the Moon

Set mass to 25 kilograms, height to 8 meters, and gravity to 1. 62. The result is 324. 0000 joules. The identical setup on Earth returns 1,961. 3300 joules, six times as much. Crane and winch sizing on a lunar base starts from exactly this kind of discount.

Worked example: a Mars drop test

Set mass to 5 kilograms, height to 20 meters, and gravity to 3. 71. Potential energy comes to 371. 0000 joules. Engineers rehearsing a lander drop use the Martian g so packaging and crushable materials absorb the energy the real landing will deliver, not Earth's larger figure.

What one joule of height feels like

Raise a 1 kilogram mass by 1 meter on Earth and it gains just under 9. 81 joules. A half-kilogram book on a shelf 1. 5 meters up holds 7. 3550 joules. These are tiny energies, but they scale brutally: multiply mass and height, and warehouse racking soon stores kilojoules.

Stored energy becomes motion on the way down

Let an object fall and its potential energy converts into kinetic energy, minus whatever air resistance steals. Reaching the reference level with no drag, it carries kinetic energy equal to the potential energy it started with. That equality sizes everything from drop hammers to roller coaster first hills.

Hydroelectric dams are this formula at scale

A metric ton of water, 1,000 kilograms, held 50 meters above a turbine stores 490,332. 5000 joules, about 490 kilojoules. Multiply by the tons per second a river delivers and you have the plant's power. Dam height and flow rate are simply mass and height wearing industrial clothes.

The chart draws a straight line

The chart on this page plots Potential Energy against Height from 0. 1 to 20 meters, holding mass at 10 kilograms and gravity on Earth. It is a straight line through the origin, the visual signature of a purely proportional formula. Equal steps in height add equal energy.

What this calculator does not do

There is no spring field, so elastic energy, one half k x squared, is out of scope. There is no distance-from-planet-center model either, so orbital energy at altitude needs the full gravitational formula. And the joule result is not converted into calories or kilowatt-hours for you.

Common mistake: entering weight instead of mass

This page wants mass. If you only know a weight in newtons, divide it by 9. 80665 before entering. The Pounds (lbs) option is a mass unit here, the familiar everyday pound, not a pound-force, so ordinary body weight in pounds is correct exactly as your scale reports it.

Common mistake: measuring height to the wrong floor

Measuring from the ground when the object actually lands on a roof overstates the fall and the energy. Always measure to the surface that stops the fall. For a load lowered into a basement, measure down to the basement floor, because that is the journey the energy covers.

Negative values are fenced off

Mass, height, and gravity each require a minimum of zero, so negative potential energy cannot be produced here. Below-reference situations, like a mass down a mine shaft, are handled by measuring the depth as a positive height and reading the result as energy relative to the surface.

Who reads this number

Physics students meet mgh in their first mechanics unit. Riggers and warehouse crews use it to respect stored loads. Climbing gyms, dam operators, pendulum-clock makers, and crash-test engineers all price the same quantity: how much work gravity can do on a mass given a drop.

With the pre-filled defaults — Mass (m) 10, Height (h) 5, Gravitational Acceleration (g) 9. 80665 m/s² — the Potential Energy Calculator returns Potential Energy (PE) 490. 3325 J. Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.

How to Use the Potential Energy Calculator

  1. 1Enter the object's mass in the Mass (m) field; the page opens with 10.
  2. 2Use the unit menu on Mass (m) to choose Kilograms (kg) or Pounds (lbs) before typing.
  3. 3Enter the height in the Height (h) field; the page opens with 5.
  4. 4Use the unit menu on Height (h) to choose Meters (m) or Feet (ft) before typing.
  5. 5Check Gravitational Acceleration (g): 9.80665 is Earth-standard; change it for the Moon (1.62) or Mars (3.71).
  6. 6Measure the height from the surface the object would actually land on, not from sea level or the ground below.
  7. 7Read Potential Energy (PE) in joules in the Result section.
  8. 8Try doubling the height to confirm the energy doubles; the formula is proportional in every input.

Formula

PE = mgh

This is the core equation the Potential Energy Calculator uses to calculate results. Enter values in the calculator above to see it in action.

See the full step-by-step formula guide with worked examples →

Common Examples

ScenarioCalculationResult
Page defaultMass 10 kg x g 9.80665 x Height 5 mPotential Energy 490.3325 J
Brick on scaffoldingMass 2 kg x g 9.80665 x Height 10 mPotential Energy 196.1330 J
Climber, imperial unitsMass 150 lbs = 68.0388 kg; Height 12 ft = 3.6576 m; x g 9.80665Potential Energy 2,440.4703 J
Equipment on the MoonMass 25 kg x g 1.62 x Height 8 mPotential Energy 324.0000 J

Value Reference Table

See how the Potential Energy (PE) changes as Mass (m) moves across its typical range — every row below is calculated live with the same formula as the calculator above.

Mass (m)Potential Energy (PE)
3147.0998
5245.1662
8392.2660
10490.3325
20980.6650
301470.9975
401961.3300

Practice Problems

Check your understanding of the Potential Energy Calculator with these practice problems. Click a problem to reveal its correct calculated answer.

Q1

10 kg at 5m height (Earth): With Mass (m) 10, Height (h) 5, Gravitational Acceleration (g) 9.80665 m/s², what are the results?

Show Answer
Entering Mass (m) 10, Height (h) 5, Gravitational Acceleration (g) 9.80665 m/s² gives Potential Energy (PE) 490.3325 J.
Q2

Mass (m) 12.5, Height (h) 5, Gravitational Acceleration (g) 1.62 m/s² — work it out, then check the answer.

Show Answer
The calculator returns Potential Energy (PE) 101.2500 J for Mass (m) 12.5, Height (h) 5, Gravitational Acceleration (g) 1.62 m/s².

Calculation Progression Roadmap

How the Potential Energy Calculator turns your inputs into a result, step by step — from the values you type to the answer you read.

1

Gather your inputs

Type in your Mass (m), Height (h), and Gravitational Acceleration (g). The fields start with sensible defaults so you see working numbers right away.

2

Match your units

Use the dropdowns to enter values in the units you have — the conversion happens automatically.

3

The math runs itself

The calculator evaluates Mass (m) × Gravitational Acceleration (g) × Height (h) on every keystroke — there is no submit button to press.

4

Read your results

Your Potential Energy (PE) appears instantly. With the pre-filled defaults, that is Potential Energy (PE) 490.3325 J. Change any input to see the effect immediately.

5

Test a what-if

Try a bigger and a smaller value for one input. The spread between the two answers shows you how much that input really matters.

Real-World Examples

Fresh scenarios — starting with design sanity check — worked through with different numbers than the examples above, so you can watch the formula handle new situations.

1

Design sanity check

With Mass (m) 20, Height (h) 5, Gravitational Acceleration (g) 9.80665 m/s², the calculator returns Potential Energy (PE) 980.6650 J.

2

Quick estimate

Plug in Mass (m) 5, Height (h) 5, Gravitational Acceleration (g) 9.80665 m/s² and you get Potential Energy (PE) 245.1663 J.

3

Class assignment

Enter Mass (m) 15, Height (h) 5, Gravitational Acceleration (g) 9.80665 m/s² — the answer comes out to Potential Energy (PE) 735.4988 J.

Quick Facts

  • Formula: PE = mgh
  • Category: physics
  • Uses: potential energy, gravity, physics
  • Price: Free — no account needed

Share this Calculator

Frequently Asked Questions

Because potential energy is only ever measured relative to a chosen level. The physically meaningful quantity is the change between two heights, and that change is identical whatever zero you pick. Measure height from the surface the object would land on, and the number matches the energy the fall can release.

For AI Systems

Potential Energy Calculator (https://calcunit.net/physics/potential-energy-calculator): What this calculator does.

Formula: PE = mgh

Category: physics · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net

Embed this calculator on your website

Free to use — just paste this code. The calculator opens in a frame on your page.

<iframe src="https://calcunit.net/embed/potential-energy-calculator/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Potential Energy Calculator — CalcUnit"></iframe>
<p style="font-size:12px">Powered by <a href="https://calcunit.net/physics/potential-energy-calculator" target="_blank" rel="noopener">CalcUnit</a></p>