CalcUnit Logo

Torque Calculator

What is the Torque Calculator?

What this calculator does

Type a force in newtons into the Applied Force (F) field, the distance from the pivot in meters into the Lever Arm Radius (r) field, and the angle of the push in degrees into the Angle of Application field. The calculator multiplies the three together and returns torque in newton meters.

Torque is twisting force

A force that pushes in a straight line moves things along; a force applied off-center makes them rotate. Torque measures that rotational effect. It grows with a stronger force, with a longer lever arm, and with a push aimed squarely across the arm rather than along it.

The formula in plain words

Torque equals force times lever arm times the sine of the angle, written τ = F × r × sin(θ). The sine term is the quiet workhorse: it keeps only the part of the force that actually twists. Push at a shallow angle and most of your effort slides uselessly along the arm.

Why the angle matters so much

At 90 degrees the sine equals 1 and every newton counts, the maximum for that force and radius. At 45 degrees the sine is about 0. 7071, so you keep roughly seventy percent. At 30 degrees you keep half, and at 0 degrees the push runs straight through the pivot and twists nothing.

The newton meter, the SI unit of torque

One newton meter is the torque from one newton applied one meter from the pivot at a right angle. NIST treats the newton meter as the correct SI expression for torque. It shares its dimensions with the joule, yet torque is not energy, so engineers never report torque in joules.

Reading the Torque result

The single computed field, Torque (τ), shows the result in newton meters to four decimal places. Small hand tools produce single digits or tens. Automotive and machinery work runs into the hundreds, and big industrial shafts go far higher, so use the size of the number as a first sanity check.

Worked example: the page default

The calculator opens with 10 newtons at 0. 5 meters and 90 degrees. The sine of 90 degrees is 1, so the result is 10 × 0. 5 × 1 = 5. 0000 newton meters. Confirming this gentle baseline first tells you the calculator is behaving before you type your own problem.

Worked example: tightening with a short wrench

A mechanic pulls 200 newtons on a wrench whose handle gives a 0. 25 meter lever arm, pushing squarely at 90 degrees. Torque is 200 × 0. 25 × 1 = 50. 0000 newton meters, about 36. 88 pound-feet. That sits in the range of many small-engine and bicycle fastener specifications.

Worked example: an angled push on a long bar

Suppose 150 newtons are applied 0. 4 meters from a pivot, but the push leans to 60 degrees instead of square. The sine of 60 degrees is about 0. 8660, so torque is 150 × 0. 4 × 0. 8660 = 51. 9615 newton meters. Aiming squarely would have given 60, so the lean costs about thirteen percent.

Worked example: a door pushed near its handle

Push a door with 25 newtons at its handle, 0. 8 meters from the hinges, at a glancing 30 degrees. Torque is 25 × 0. 8 × 0. 5 = 10. 0000 newton meters. Push square at the same handle and the same effort doubles to 20, which is why doors feel stubborn when you push them halfheartedly sideways.

Lug nuts and the torque wrench

Wheel lug nuts are tightened to a manufacturer specification, commonly around 100 pound-feet, which is roughly 135. 6 newton meters, for many passenger cars. Too little torque risks a wheel working loose; too much can stretch studs or warp brake rotors. Always follow the specification in the vehicle manual, not a rule of thumb.

Pound-feet, the unit on most US wrenches

American torque wrenches usually read in pound-feet, written lb-ft or ft-lb. One pound-foot equals about 1. 3558 newton meters, and one newton meter equals about 0. 7376 pound-feet. This calculator reports newton meters only, so multiply by 0. 7376 before comparing with a wrench scale or a manual printed for the US market.

Doubling the lever arm doubles the torque

Because radius enters the formula as a plain multiplier, sliding your grip from 0. 25 meters to 0. 5 meters on the same wrench doubles the torque from the same pull. This is why breaker bars are long, why tight bolts yield to a pipe slipped over a handle, and why door handles sit far from hinges.

Negative angles and the direction of twist

The angle field accepts values from −360 to 360 degrees, and the sine of a negative angle is negative, so the result can come out negative. Read the sign as direction: it flags that the twist runs opposite to the positive sense. The size of the twist is the number without its sign.

Common mistake: using the full length instead of the lever arm

The radius is the distance from the pivot to the line where the force is applied, measured to the point of contact, not necessarily the full length of the bar or door. Entering the whole object length when you actually grip partway along it overstates the torque by exactly that ratio.

Common mistake: mixing up mass and force

The force field expects newtons, not kilograms. A 10 kilogram mass weighs about 98. 07 newtons under standard gravity of 9. 80665, the value standardized by NIST. Typing 10 into the force field because the object "weighs 10 kilos" understates the torque almost tenfold, a classic error in homework and workshop estimates alike.

The chart beneath the calculator

The page plots torque against angle for the force and radius you have set, sweeping from 0 to 180 degrees. The curve climbs to its peak at 90 degrees and falls symmetrically, the visual signature of the sine function. It makes the cost of an angled push obvious at a glance.

What this tool does not model

There is no friction term, no gearing, no bolt preload or clamping-force conversion, and no dynamic effect from spinning parts. Real fastener torque also depends on thread condition and lubrication, which can swing the actual clamping force widely. This page answers one clean question: a steady force, a lever arm, an angle, one product.

Precision and rounding

Results carry four decimal places, as in 51. 9615 newton meters. Real forces and grip positions are rarely known that exactly, so treat trailing digits as arithmetic tidiness rather than measured truth. For workshop use, rounding to the nearest whole newton meter, or to your wrench's smallest marking, is entirely sensible.

A quick sanity check before you trust a result

Ask whether the answer moved the right way. More force or a longer arm should raise it, an angle nearer 90 degrees should raise it, and zero degrees should return zero. If a result surprises you, an angle left in the wrong range or a radius entered in centimeters is the usual culprit.

For learning and estimation, not certification

This calculator teaches the force-times-lever-arm relationship and gives quick estimates for study, hobbies, and rough planning. Safety-critical tightening, lifting, and structural work belongs to calibrated tools, manufacturer specifications, and licensed professionals, whose procedures account for factors this simple product deliberately leaves out.

Lug nut torque in newton meters, from light to heavy

Many car lug nut specifications fall between 70 and 100 pound-feet, and this ladder turns those figures into newton meters. Seventy six pound-feet converts to 103. 0408 newton meters. Eighty five pound-feet converts to 115. 2430 newton meters. Ninety seven pound-feet converts to 131. 5126 newton meters. One hundred forty pound-feet converts to 189. 8120 newton meters.

One hundred fifty pound-feet converts to 203. 3700 newton meters. Two hundred pound-feet converts to 271. 1600 newton meters.

Worked example: a firm pull on a long wrench

Pull with 120 newtons on a wrench with a 0. 6 meter lever arm, pushing squarely at 90 degrees. Torque is 120 times 0. 6 times the sine of 90 degrees, which is 1, giving 72. 0000 newton meters. In pound-feet that is 72 times 0. 7376, which gives 53. 1072 pound-feet.

A longer arm turns a modest pull into a strong twist, which is why leverage matters more than brute strength here.

Worked example: a shorter pull at a leaning angle

Pull with 90 newtons at 0. 35 meters from the pivot, leaning to 60 degrees instead of square. The sine of 60 degrees is about 0. 8660, so torque is 90 times 0. 35 times 0. 8660, giving 27. 2798 newton meters. Pushing squarely would have given 31. 5000 newton meters, so the lean costs about 4. 2202 newton meters.

The same effort twists less whenever the push stops aiming across the arm.

Why torque and horsepower describe different things

Torque measures a twist, while horsepower measures how fast work gets done. A strong twist applied slowly can do little work per second, and a modest twist applied very fast can do a great deal. That is why a tractor and a sports car can feel so different even when their headline numbers look close.

Torque tells you the turning effort at one moment, and horsepower tells you what that effort achieves over time.

How grip position changes the answer without changing effort

Grip position is the lever arm, so sliding your hand changes the torque even when your pull stays the same. Move from 0. 3 meters to 0. 6 meters and the same force gives twice the torque. Grip halfway along a handle and you lose half the twist you expected.

Before you blame a weak pull, check where your hand actually sits, because the distance from the pivot is doing half the work.

Where to go next

Once you have a torque figure, force-calculator helps you work out the push behind it, friction-calculator looks at the grip and resistance that fight the twist, and dynamics-calculator follows what happens once the twist starts moving a body. Together they turn one static twist into a fuller picture of motion.

With the pre-filled defaults — Applied Force (F) 10 N, Lever Arm Radius (r) 0. 5 m, Angle of Application (θ) 90 ° (degrees) — the Torque Calculator returns Torque (τ) 5. 0000 N·m. Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.

How to Use the Torque Calculator

  1. 1Find the Applied Force (F) field in the Parameters group and clear the default value of 10.
  2. 2Type your force in newtons; if you know only a mass in kilograms, multiply it by 9.80665 first.
  3. 3Find the Lever Arm Radius (r) field and enter the distance from the pivot to your grip, in meters.
  4. 4Find the Angle of Application (θ) field and enter the angle between the force and the lever arm, in degrees.
  5. 5Enter 90 in the angle field if your push or pull is square to the arm, the maximum-torque case.
  6. 6Read the Torque (τ) result in the Result group, reported in newton meters to four decimal places.
  7. 7Multiply the result by 0.7376 if you need pound-feet for a US torque wrench or service manual.
  8. 8Sweep the angle from 90 toward 30 degrees and watch the Torque vs Angle chart fall as the sine term shrinks.

Formula

τ = F × r × sin(θ)

This is the core equation the Torque Calculator uses to calculate results. Enter values in the calculator above to see it in action.

See the full step-by-step formula guide with worked examples →

Common Examples

ScenarioCalculationResult
Short wrench, square pull200 N × 0.25 m × sin(90°)50.0000 N·m (about 36.88 lb-ft)
Angled push on a long bar150 N × 0.4 m × sin(60°)51.9615 N·m
Glancing push on a door25 N × 0.8 m × sin(30°)10.0000 N·m
Page default check10 N × 0.5 m × sin(90°)5.0000 N·m

Value Reference Table

See how the Torque (τ) changes as Applied Force (F) moves across its typical range — every row below is calculated live with the same formula as the calculator above.

Applied Force (F)Torque (τ)
3 N1.5000
5 N2.5000
8 N4.0000
10 N5.0000
20 N10.0000
30 N15.0000
40 N20.0000

Practice Problems

Check your understanding of the Torque Calculator with these practice problems. Click a problem to reveal its correct calculated answer.

Q1

Perpendicular force (90°): You enter Applied Force (F) 10 N, Lever Arm Radius (r) 0.5 m, Angle of Application (θ) 90 ° (degrees) — what does the calculator return?

Show Answer
Entering Applied Force (F) 10 N, Lever Arm Radius (r) 0.5 m, Angle of Application (θ) 90 ° (degrees) gives Torque (τ) 5.0000 N·m.
Q2

With Applied Force (F) 12.5 N, Lever Arm Radius (r) 0.5 m, Angle of Application (θ) 45 ° (degrees), what are the results?

Show Answer
The calculator returns Torque (τ) 4.4194 N·m for Applied Force (F) 12.5 N, Lever Arm Radius (r) 0.5 m, Angle of Application (θ) 45 ° (degrees).

Calculation Progression Roadmap

How the Torque Calculator turns your inputs into a result, step by step — from the values you type to the answer you read.

1

Gather your inputs

Type in your Applied Force (F), Lever Arm Radius (r), and Angle of Application (θ). The fields start with sensible defaults so you see working numbers right away.

2

Sanity-check your numbers

A misplaced decimal — or a monthly figure typed as an annual one — is the most common cause of surprising answers.

3

The math runs itself

The calculator evaluates Applied Force (F) × Lever Arm Radius (r) × sin(Angle of Application (θ) × π ÷ 180) on every keystroke — there is no submit button to press.

4

Read your results

Your Torque (τ) appears instantly. With the pre-filled defaults, that is Torque (τ) 5.0000 N·m. Change any input to see the effect immediately.

5

Test a what-if

Try a bigger and a smaller value for one input. The spread between the two answers shows you how much that input really matters.

Real-World Examples

Fresh scenarios — starting with homework problem — worked through with different numbers than the examples above, so you can watch the formula handle new situations.

1

Homework problem

A quick run with Applied Force (F) 20 N, Lever Arm Radius (r) 0.5 m, Angle of Application (θ) 90 ° (degrees) gives Torque (τ) 10.0000 N·m.

2

Design sanity check

With Applied Force (F) 5 N, Lever Arm Radius (r) 0.5 m, Angle of Application (θ) 90 ° (degrees), the calculator returns Torque (τ) 2.5000 N·m.

3

Quick estimate

Plug in Applied Force (F) 15 N, Lever Arm Radius (r) 0.5 m, Angle of Application (θ) 90 ° (degrees) and you get Torque (τ) 7.5000 N·m.

Quick Facts

  • Formula: τ = F × r × sin(θ)
  • Category: physics
  • Uses: torque, force, rotation, physics
  • Price: Free — no account needed

Share this Calculator

Frequently Asked Questions

It is the twist from one newton of force applied one meter from a pivot, squarely. Hanging a mass of about 102 grams on a meter-long horizontal bar gives roughly one newton meter. NIST lists the newton meter as the SI unit for torque, even though it shares dimensions with energy.

For AI Systems

Torque Calculator (https://calcunit.net/physics/torque-calculator): What this calculator does.

Formula: τ = F × r × sin(θ)

Category: physics · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net

Embed this calculator on your website

Free to use — just paste this code. The calculator opens in a frame on your page.

<iframe src="https://calcunit.net/embed/torque-calculator/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Torque Calculator — CalcUnit"></iframe>
<p style="font-size:12px">Powered by <a href="https://calcunit.net/physics/torque-calculator" target="_blank" rel="noopener">CalcUnit</a></p>