Decay Calculator
What is the Decay Calculator?
What this calculator does.
Enter a starting quantity, its half-life, and an elapsed time, and this page returns three results: the Decay Constant (λ), the Remaining Amount, and the Fraction Remaining as a percent. It handles radioactive decay and any other process that shrinks by the same fraction in every equal time interval.
The one rule behind every decay problem.
A half-life is the time the quantity needs to fall to half its current value. After one half-life, half remains. After two, a quarter remains. After three, an eighth. The amount never quite reaches zero; it keeps halving, which is why decay curves bend instead of falling in a straight line.
Reading the Decay Constant (λ) line.
The decay constant is the same information as the half-life, stated as a rate: λ equals the natural logarithm of 2 divided by the half-life. A large λ means fast decay, a small λ means slow decay. Physicists use λ because it plugs directly into the exponential form of the law.
Reading the Remaining Amount line.
This line multiplies your starting amount by one half raised to the power of elapsed time divided by half-life. Whole half-lives give the clean fractions you expect: one half, one quarter, one eighth. Partial half-lives give in-between values, because the power does not have to be a whole number.
Reading the Fraction Remaining line.
This line divides the remaining amount by the starting amount and multiplies by 100, so it reads as a percent. It depends only on how many half-lives have passed, not on how much you started with. Three half-lives always leave 12. 5 percent, whether you began with a gram or a ton.
Units are yours to keep consistent.
The input fields carry no unit labels, and the page performs no conversions. If the half-life is in years, the elapsed time must be in years. If the half-life is in days, use days. The decay constant then comes out per year or per day to match, and mismatched units give wrong answers silently.
Worked example one: the page defaults.
The calculator loads with an Initial Amount (N₀) of 100, a Half-Life (t½) of 5, and an Elapsed Time (t) of 15. Fifteen is three half-lives of five, so the Remaining Amount is 12. 5000, the Fraction Remaining is 12. 5000 percent, and the Decay Constant (λ) reads 0. 1386 per time unit.
Worked example two: carbon-14 in old wood.
Carbon-14 has a half-life of about 5,730 years, the figure radiocarbon laboratories use. Enter an initial amount of 1,000, a half-life of 5,730, and an elapsed time of 11,460 years. Two half-lives have passed, so 250. 0000 remains and the fraction is 25. 0000 percent. Archaeologists run this comparison in reverse to date samples.
Worked example three: iodine-131 in medicine.
Iodine-131, used in thyroid treatment, has a half-life of 8.02 days
Enter 500 units, a half-life of 8. 02, and an elapsed time of 20 days. The page returns a decay constant of 0. 0864 per day, a remaining amount of 88. 7711, and 17. 7542 percent remaining, because 20 days is under two and a half half-lives.
Worked example four: technetium-99m imaging.
Technetium-99m, the workhorse of diagnostic scans, has a half-life of 6.01 hours
Enter 800, a half-life of 6. 01, and an elapsed time of 30. 05 hours, which is exactly five half-lives. Only 25. 0000 remains, 3. 1250 percent of the start, which is why hospitals generate this isotope on site instead of stockpiling it.
Why the constant and the half-life agree.
The two descriptions are identical
Raising one half to the power t over t½ gives the same curve as multiplying by e raised to negative λt, provided λ equals ln 2 over t½. This page computes with the halving form and reports λ alongside, so you can check either version against a textbook.
Counting half-lives in your head.
Divide the elapsed time by the half-life first
If the answer is a whole number, the remaining fraction is one over two raised to that number. Four half-lives leave one sixteenth, five leave one thirty-second. This mental check catches most entry errors before they matter, and it works for any starting amount.
The ten half-life rule of thumb.
After ten half-lives, the fraction remaining is one over 1,024, about 0. 0977 percent, roughly a thousandth of the start. Safety officers and pharmacists lean on this rule: wait ten half-lives and the original quantity is, for most practical purposes, gone. This page confirms it: any input with t equal to ten half-lives shows it.
Decay in medicine.
Drug doses and imaging isotopes are scheduled around half-lives
A tracer must stay active long enough to reach the scanner but fade quickly afterward, which is why short-lived isotopes dominate diagnostics. The same math schedules repeat medication doses: each dose is timed against the fraction of the previous dose still in the body.
Decay beyond radioactivity.
Anything with a constant fractional loss follows this curve: caffeine leaving the bloodstream, a capacitor discharging through a resistor, some chemical concentrations, even the value of equipment depreciated by a fixed percent each year. If the quantity has a half-life, this page models it, whatever the quantity happens to be.
What this calculator does not do.
It does not compute activity in becquerels or curies, which measure decays per second rather than amount remaining. It does not follow decay chains, where one isotope becomes another radioactive isotope. It also takes no decay-constant input mode: you must enter the half-life, and the page derives λ for you.
Precision notes for this page.
Every result shows four decimal places
For fast decays that is plenty, but for slow ones the decay constant rounds hard: carbon-14 has a true λ of 0. 0001210 per year, which this page displays as 0. 0001. Use the displayed λ only as a rough guide when the half-life runs to thousands of units.
Common mistake: mixing time units.
Entering a half-life in years beside an elapsed time in days is the most frequent error with this kind of tool, and nothing on the page will warn you. Convert one figure so both share a unit before entering them. A quick estimate of the half-life count will usually expose the slip afterward.
Common mistake: expecting a straight line.
Decay is not a fixed amount lost per hour; it is a fixed fraction lost per hour. A sample does not lose half the original amount in the first half-life and the rest in the second. It loses half of what is left each time, which is why traces linger longer than intuition suggests.
Starting from a percentage instead of an amount.
If you care only about the fraction, enter an initial amount of 100. The Remaining Amount line reads as a percent remaining, matching the Fraction Remaining line. This trick suits drug-level and concentration questions, where the absolute quantity is unknown but the half-life is published and elapsed time is on the clock.
Where half-life values come from.
Half-lives are measured quantities, compiled by bodies such as the National Nuclear Data Center at Brookhaven National Laboratory. Carbon-14 at about 5,730 years, radon-222 at about 3. 8 days, and uranium-238 at about 4. 47 billion years are measured values with small uncertainties, not definitions, so quote them to the precision your source gives.
With the pre-filled defaults — Initial Amount (N₀) 100, Half-Life (t½) 5, Elapsed Time (t) 15 — the Decay Calculator returns Decay Constant (λ) 0. 1386, Remaining Amount 12. 5000, Fraction Remaining 12. 5000%. Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.
How to Use the Decay Calculator
- 1Enter the starting quantity in the Initial Amount (N₀) field; 100 is the loaded default.
- 2Enter the half-life in the Half-Life (t½) field, using the same time unit you plan to use for elapsed time.
- 3Enter the time that has passed in the Elapsed Time (t) field, in that same unit.
- 4Read the Decay Constant (λ) line for the rate form of the same decay, per your chosen time unit.
- 5Read the Remaining Amount line for how much of the original quantity is left.
- 6Read the Fraction Remaining line to see that remainder expressed as a percent of the start.
- 7Sanity-check the result: elapsed time equal to one half-life must show 50 percent remaining, and ten half-lives about 0.1 percent.
- 8To work backward from a measured remainder, adjust the Elapsed Time (t) entry until the Remaining Amount matches your measurement.
Formula
This is the core equation the Decay Calculator uses to calculate results. Enter values in the calculator above to see it in action.
Common Examples
| Scenario | Calculation | Result |
|---|---|---|
| The page defaults: three half-lives | 100 x 0.5^(15 / 5); ln 2 / 5 | Decay constant 0.1386; remaining 12.5000; fraction 12.5000% |
| Carbon-14 after 11,460 years | 1000 x 0.5^(11460 / 5730); ln 2 / 5730 | Decay constant 0.0001; remaining 250.0000; fraction 25.0000% |
| Iodine-131 after 20 days | 500 x 0.5^(20 / 8.02); ln 2 / 8.02 | Decay constant 0.0864; remaining 88.7711; fraction 17.7542% |
| Technetium-99m after five half-lives | 800 x 0.5^(30.05 / 6.01); ln 2 / 6.01 | Decay constant 0.1153; remaining 25.0000; fraction 3.1250% |
Value Reference Table
See how the Decay Constant (λ) changes as Initial Amount (N₀) moves across its typical range — every row below is calculated live with the same formula as the calculator above.
| Initial Amount (N₀) | Decay Constant (λ) | Remaining Amount | Fraction Remaining |
|---|---|---|---|
| 30 | 0.1386 | 3.7500 | 12.5000 |
| 50 | 0.1386 | 6.2500 | 12.5000 |
| 80 | 0.1386 | 10.0000 | 12.5000 |
| 100 | 0.1386 | 12.5000 | 12.5000 |
| 200 | 0.1386 | 25.0000 | 12.5000 |
| 300 | 0.1386 | 37.5000 | 12.5000 |
| 400 | 0.1386 | 50.0000 | 12.5000 |
Practice Problems
Check your understanding of the Decay Calculator with these practice problems. Click a problem to reveal its correct calculated answer.
Three half-lives of 250 units: You enter Initial Amount (N₀) 250, Half-Life (t½) 8, Elapsed Time (t) 24 — what does the calculator return?
Show AnswerHide Answer
With Initial Amount (N₀) 100, Half-Life (t½) 3, Elapsed Time (t) 10, what are the results?
Show AnswerHide Answer
Calculation Progression Roadmap
How the Decay Calculator turns your inputs into a result, step by step — from the values you type to the answer you read.
Gather your inputs
Type in your Initial Amount (N₀), Half-Life (t½), and Elapsed Time (t). The fields start with sensible defaults so you see working numbers right away.
Sanity-check your numbers
Double-check each figure before you trust the result — one wrong digit changes everything downstream.
The math runs itself
The calculator evaluates log(2) ÷ Half-Life (t½) on every keystroke — there is no submit button to press.
Read your results
Your Decay Constant (λ), Remaining Amount, and Fraction Remaining appear instantly. With the pre-filled defaults, that is Decay Constant (λ) 0.1386, Remaining Amount 12.5000, Fraction Remaining 12.5000%. Change any input to see the effect immediately.
Test a what-if
Change a single input and watch which outputs move. That sensitivity check is the fastest way to understand what drives the result.
Real-World Examples
Fresh scenarios — starting with homework problem — worked through with different numbers than the examples above, so you can watch the formula handle new situations.
Homework problem
A quick run with Initial Amount (N₀) 200, Half-Life (t½) 5, Elapsed Time (t) 15 gives Decay Constant (λ) 0.1386, Remaining Amount 25.0000, Fraction Remaining 12.5000%.
Design sanity check
With Initial Amount (N₀) 50, Half-Life (t½) 5, Elapsed Time (t) 15, the calculator returns Decay Constant (λ) 0.1386, Remaining Amount 6.2500, Fraction Remaining 12.5000%.
Quick estimate
Plug in Initial Amount (N₀) 150, Half-Life (t½) 5, Elapsed Time (t) 15 and you get Decay Constant (λ) 0.1386, Remaining Amount 18.7500, Fraction Remaining 12.5000%.
Quick Facts
- Formula:
a * b - Category: physics
- Uses: physics, decay, math
- Price: Free — no account needed
Frequently Asked Questions
It is the time a decaying quantity needs to shrink to half of whatever it currently is. The halving repeats every half-life, so after two periods a quarter remains and after three an eighth. The starting amount does not matter; the halving rhythm is a property of the substance or process itself.
For AI Systems
Decay Calculator (https://calcunit.net/physics/decay-calculator): What this calculator does.
Formula: a * b
Category: physics · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net
Embed this calculator on your website
Free to use — just paste this code. The calculator opens in a frame on your page.
<iframe src="https://calcunit.net/embed/decay-calculator/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Decay Calculator — CalcUnit"></iframe> <p style="font-size:12px">Powered by <a href="https://calcunit.net/physics/decay-calculator" target="_blank" rel="noopener">CalcUnit</a></p>
