CalcUnit Logo

Spring Calculator

What is the Spring Calculator?

What this calculator does

This page applies Hooke's law to a spring. From the spring constant, the extension, and an attached mass, it computes the spring force, the stored elastic energy, and the period of oscillation when the mass bounces on the spring.

The three inputs it asks for

Spring Constant k is measured in newtons per meter and describes stiffness. Extension is the stretch in meters, and Attached Mass is in kilograms. The page opens with k 200, extension 0. 05, and mass 1, a benchtop spring stretched by five centimeters.

Hooke's law and the force line

Spring Force is simply k times the extension. Double the stretch and the force doubles; double the stiffness and it also doubles. The page reports the size of the force only: the restoring direction, the fact that the spring pulls back toward its natural length, is not shown as a minus sign.

The stored energy line

Stored Elastic Energy is one half times k times the extension squared. Because the extension is squared, doubling the stretch quadruples the energy, a very different growth pattern from the force. This is the energy you would get back, in the ideal case, when the spring is released.

The oscillation period line

With a mass attached, the period is 2 pi times the square root of mass divided by k. Note what is missing: the extension plays no part. For an ideal spring, stretching it further before release changes how far the mass travels, not how long each bounce takes.

The page default, checked by hand

With k 200 and extension 0. 05, the force is 10 newtons. The energy is half of 200 times 0. 0025, which is 0. 25 joules. The period is 2 pi times the square root of 1 over 200, which reads 0. 4443 seconds. All three defaults check out exactly.

Worked example: stiff spring, big stretch

Enter k 500, extension 0. 1, and mass 2. The force reads 50 newtons and the stored energy 2. 5 joules. The period reads 0. 3974 seconds: the stiffer spring more than cancels the heavier mass, so the bouncing is slightly faster than the default setup.

Worked example: a soft spring

Enter k 50, extension 0. 3, and mass 0. 5. The force reads 15 newtons and the energy 2. 25 joules, built from a long, easy stretch. The period reads 0. 6283 seconds, slower than the default because the soft spring accelerates its light mass gently.

Worked example: a suspension-scale spring

Enter k 1200, extension 0. 02, and mass 0. 25. The force reads 24 newtons from just two centimeters of travel, and the energy is a modest 0. 24 joules. The period reads 0. 0907 seconds, about eleven bounces per second, typical of stiff hardware.

Worked example: a heavy mass, a slow bounce

Enter k 80, extension 0. 15, and mass 5. The force reads 12 newtons and the energy 0. 9 joules. The period reads 1. 5708 seconds: the large mass dominates the weak spring, giving the slow, stately bounce of a car settling on its suspension.

Extension is in meters, always

The Extension field expects meters, so five centimeters must be typed as 0. 05, exactly as the default shows. Type 5 instead and the force jumps to 1000 newtons and the energy to 2500 joules, a hundredfold and ten-thousandfold inflation. Check your decimals before trusting any result on this page.

Compression and negative extensions

Hooke's law covers compression too, and entering a negative extension flips the force negative while the energy stays positive, because the extension is squared in the energy formula. The page does not label stretch versus compression; the sign of your input carries that information, and the force sign follows it.

The period guard prints a fake zero

If k or the mass is zero or negative, the period line prints 0. That zero is a guard placeholder, not a measurement: a massless or springless setup has no period at all. The force and energy lines have no such guard, so a negative k produces negative force and negative energy there.

Force and energy ignore the mass

Changing the Attached Mass moves only the period. The force and energy depend solely on k and the extension, which matches the physics: how hard a spring pulls at a given stretch has nothing to do with what hangs from it. The mass decides how the system moves afterward.

Frequency by hand

The page gives the period but never the frequency. Divide 1 by the period: the default setup oscillates at 2. 2508 hertz, and the stiff example at about 2. 5165 hertz. Frequency counts bounces per second, which is often the more natural number in vibration and engineering problems.

Finding k from a measurement by hand

Hang a known mass on the spring and measure the stretch. The weight, mass times 9. 81, equals k times the stretch at rest, so k is 9. 81 times mass divided by stretch. A 2 kilogram mass stretching a spring 0. 1 meters reveals a k of 196. 2 newtons per meter.

Spending the stored energy

The stored joules convert directly into other energy. The default 0. 25 joules could lift the 1 kilogram mass by energy divided by mass times 9. 81, about 0. 0255 meters, if every joule became height. Real springs waste some energy as heat and sound, so treat that as an upper bound.

Mass means kilograms, not weight

The Attached Mass field wants mass in kilograms. If you know an object's weight in newtons instead, divide by 9. 81 first: a weight of about 9. 81 newtons corresponds to a mass of 1 kilogram. Entering a weight figure as if it were mass inflates the period by roughly a factor of 3. 13.

Real springs have an elastic limit

Every formula here assumes an ideal spring that obeys Hooke's law at any stretch. Real springs stay proportional only up to their elastic limit; beyond it they deform permanently and the numbers drift. The page will happily compute forces for a ten-meter stretch of a desktop spring, so supply the realism yourself.

Two springs together

Springs combined side by side share the load and their constants add, so two 200 newton-per-meter springs behave like one of 400. Springs joined end to end stretch more and their reciprocals add instead. This page models a single spring, so combine constants by hand first, then enter the equivalent k.

Damping is not modeled

A real mass on a real spring does not bounce forever; friction and air resistance bleed energy each cycle and the swings shrink. The period printed here is the ideal, undamped value, which real systems match closely at first and drift from as the motion dies away. No input on the page accounts for losses.

The spring's own mass

The formulas treat the spring as weightless, but a real coil has mass of its own, and roughly a third of it joins the load in the period formula. Heavy steel springs therefore bounce slightly slower than this page predicts. For light springs under heavy loads the correction is negligible and the ideal answer stands.

With the pre-filled defaults — Spring Constant k 200N/m, Extension 0. 05m, Attached Mass 1kg — the Spring Calculator returns Spring Force 10. 0000N, Stored Elastic Energy 0. 2500J, Oscillation Period with Mass 0. 4443s. Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.

How to Use the Spring Calculator

  1. 1Enter the stiffness in the Spring Constant k field, in newtons per meter.
  2. 2Enter the stretch in the Extension field, in meters, so convert centimeters first.
  3. 3Enter the hanging mass in the Attached Mass field, in kilograms.
  4. 4Read Spring Force in newtons for the pull at that stretch.
  5. 5Read Stored Elastic Energy in joules for the energy banked in the spring.
  6. 6Read Oscillation Period with Mass in seconds for one full bounce cycle.
  7. 7If the period reads 0, check that both k and the mass are positive.
  8. 8For bounces per second, divide 1 by the period by hand.

Formula

a * b

This is the core equation the Spring Calculator uses to calculate results. Enter values in the calculator above to see it in action.

Common Examples

ScenarioCalculationResult
Stiff spring, big stretchk 500 N/m, extension 0.1 m, mass 2 kg: force = 500 x 0.1; energy = 0.5 x 500 x 0.01; period = 2 pi x square root of (2 / 500)Spring Force 50 N, Stored Elastic Energy 2.5 J, Oscillation Period 0.3974 s
Soft springk 50 N/m, extension 0.3 m, mass 0.5 kg: force = 50 x 0.3; energy = 0.5 x 50 x 0.09; period = 2 pi x square root of (0.5 / 50)Spring Force 15 N, Stored Elastic Energy 2.25 J, Oscillation Period 0.6283 s
Suspension-scale springk 1200 N/m, extension 0.02 m, mass 0.25 kg: force = 1200 x 0.02; energy = 0.5 x 1200 x 0.0004; period = 2 pi x square root of (0.25 / 1200)Spring Force 24 N, Stored Elastic Energy 0.24 J, Oscillation Period 0.0907 s
Heavy mass, slow bouncek 80 N/m, extension 0.15 m, mass 5 kg: force = 80 x 0.15; energy = 0.5 x 80 x 0.0225; period = 2 pi x square root of (5 / 80)Spring Force 12 N, Stored Elastic Energy 0.9 J, Oscillation Period 1.5708 s

Value Reference Table

See how the Spring Force changes as Spring Constant k moves across its typical range — every row below is calculated live with the same formula as the calculator above.

Spring Constant kSpring ForceStored Elastic EnergyOscillation Period with Mass
50 N/m2.50000.06250.8886
100 N/m5.00000.12500.6283
200 N/m10.00000.25000.4443
300 N/m15.00000.37500.3628
400 N/m20.00000.50000.3142
500 N/m25.00000.62500.2810
600 N/m30.00000.75000.2565
800 N/m40.00001.00000.2221

Practice Problems

Check your understanding of the Spring Calculator with these practice problems. Click a problem to reveal its correct calculated answer.

Q1

Stiff spring, big stretch: Spring Constant k 500N/m, Extension 0.1m, Attached Mass 2kg — work it out, then check the answer.

Show Answer
Entering Spring Constant k 500N/m, Extension 0.1m, Attached Mass 2kg gives Spring Force 50.0000N, Stored Elastic Energy 2.5000J, Oscillation Period with Mass 0.3974s.
Q2

Plug in Spring Constant k 62.5N/m, Extension 0.3m, Attached Mass 0.5kg. What is the answer?

Show Answer
The calculator returns Spring Force 18.7500N, Stored Elastic Energy 2.8125J, Oscillation Period with Mass 0.5620s for Spring Constant k 62.5N/m, Extension 0.3m, Attached Mass 0.5kg.

Calculation Progression Roadmap

How the Spring Calculator turns your inputs into a result, step by step — from the values you type to the answer you read.

1

Gather your inputs

Type in your Spring Constant k, Extension, and Attached Mass. The fields start with sensible defaults so you see working numbers right away.

2

Sanity-check your numbers

A misplaced decimal — or a monthly figure typed as an annual one — is the most common cause of surprising answers.

3

The math runs itself

The calculator evaluates Spring Constant k × Extension on every keystroke — there is no submit button to press.

4

Read your results

Your Spring Force, Stored Elastic Energy, and Oscillation Period with Mass appear instantly. With the pre-filled defaults, that is Spring Force 10.0000N, Stored Elastic Energy 0.2500J, Oscillation Period with Mass 0.4443s. Change any input to see the effect immediately.

5

Test a what-if

Try a bigger and a smaller value for one input. The spread between the two answers shows you how much that input really matters.

Real-World Examples

Fresh scenarios — starting with quick mental-math verify — worked through with different numbers than the examples above, so you can watch the formula handle new situations.

1

Quick mental-math verify

Plug in Spring Constant k 400N/m, Extension 0.05m, Attached Mass 1kg and you get Spring Force 20.0000N, Stored Elastic Energy 0.5000J, Oscillation Period with Mass 0.3142s.

2

Class assignment

Enter Spring Constant k 100N/m, Extension 0.05m, Attached Mass 1kg — the answer comes out to Spring Force 5.0000N, Stored Elastic Energy 0.1250J, Oscillation Period with Mass 0.6283s.

3

Homework check

For Spring Constant k 300N/m, Extension 0.05m, Attached Mass 1kg, expect Spring Force 15.0000N, Stored Elastic Energy 0.3750J, Oscillation Period with Mass 0.3628s.

Quick Facts

  • Formula: a * b
  • Category: math
  • Uses: math, spring, math
  • Price: Free — no account needed

Share this Calculator

Frequently Asked Questions

For an ideal spring the restoring force grows in exact proportion to the stretch, so a bigger stretch produces proportionally bigger acceleration. The two effects cancel, leaving the period set only by the mass and the spring constant. Stretch harder and the mass travels further in the same time.

For AI Systems

Spring Calculator (https://calcunit.net/math/spring-calculator): What this calculator does.

Formula: a * b

Category: math · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net

Embed this calculator on your website

Free to use — just paste this code. The calculator opens in a frame on your page.

<iframe src="https://calcunit.net/embed/spring-calculator/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Spring Calculator — CalcUnit"></iframe>
<p style="font-size:12px">Powered by <a href="https://calcunit.net/math/spring-calculator" target="_blank" rel="noopener">CalcUnit</a></p>