CalcUnit Logo

Acid Base Calculator

What is the Acid Base Calculator?

What this calculator does

Enter the hydrogen ion concentration of a solution in the field labeled [H+] (mol/L), and this calculator works out four results: pH, pOH, the hydroxide concentration [OH-], and a line called Is Acidic that answers 1 for yes or 0 for no.

What it does not calculate

This page converts in one direction only: from [H+] to the other values. It has no titration or neutralization volume calculation, no acid strength constants, and no fields for entering pH or [OH-] directly. If your problem starts from pH, it needs the reverse steps described below.

The pH formula

The pH line is computed as pH = -log10([H+]), the negative base-10 logarithm of the concentration you entered. Because it is a logarithm, each whole pH step means a tenfold change in concentration, which is why pH values stay small while concentrations span many powers of ten.

Where pOH and [OH-] come from

The pOH line is 14 - pH, and the [OH-] line is 10 raised to the power of negative pOH. Those two steps rely on a fixed fact about water at 25 degrees Celsius: in any water-based solution, pH and pOH always add up to exactly 14.

Reading the four result lines

The pH line shows two decimal places, pOH also shows two, and [OH-] shows twelve decimal places because the values are usually tiny. The Is Acidic line shows 1 when the pH is below 7 and 0 when it is 7 or above, with no rounding in between.

Worked example: the page default

The calculator opens with [H+] set to 0. 0001 mol/L. The pH line shows 4. 00 and pOH shows 10. 00, which add to 14 as they should. The [OH-] line shows 0. 000000000100, and Is Acidic shows 1, because a pH of 4 is well below 7.

Worked example: a strong acid solution

Enter 0. 01 mol/L, the hydrogen ion concentration of a typical strong acid demonstration solution. The pH line shows 2. 00, pOH shows 12. 00, and [OH-] shows 0. 000000000001. Is Acidic shows 1. Notice that a hundredfold stronger concentration than the default moved pH by only two units.

Worked example: neutral pure water

Enter 0. 0000001 mol/L, the hydrogen ion concentration of pure water at 25 degrees Celsius. The pH line shows 7. 00 and pOH shows 7. 00, perfectly balanced. The [OH-] line shows 0. 0000001, exactly equal to the [H+] you entered, and Is Acidic shows 0, because 7 is neutral, not acidic.

Worked example: a basic solution

Enter 0. 0000000025 mol/L, a hydrogen ion concentration far below that of pure water. Now pH shows 8. 60, pOH shows 5. 40, and [OH-] shows 0. 000004, which is larger than [H+], as it must be in a base. Is Acidic shows 0, correctly reporting a basic solution.

Worked example: a very basic solution

Enter 0. 000000000005 mol/L. The pH line shows 11. 30, pOH shows 2. 70, and [OH-] shows 0. 002, a concentration you could almost weigh. Is Acidic shows 0. Solutions like dilute bleach and soapy water live in this region of the scale, far from the acidic end.

Typing very small concentrations

Concentrations arrive in science problems written as powers of ten, like 1 times 10 to the power of -7. In this field, type the plain decimal instead: 0. 0000001. Count the zeros carefully, because one zero too few makes the solution ten times stronger and shifts pH by a full unit.

Why each pH unit is a big deal

Because pH is logarithmic, lemon juice at about pH 2. 30 (from [H+] near 0. 005 mol/L) is ten times more acidic than a solution at pH 3. 30, not slightly more. Stomach fluid, with [H+] around 0. 03 mol/L, reads pH 1. 52 by the same formula.

The 25 degree assumption

The adding-to-14 rule is exact only at 25 degrees Celsius. Warm the water and the balance point moves: at body temperature, 37 degrees, perfectly neutral water has a pH near 6. 81, not 7. 00. This calculator always uses 14, so treat its neutral line as a room-temperature statement.

Strong acids versus weak acids

The field asks for the hydrogen ion concentration itself, not the concentration of acid you dissolved. A strong acid releases essentially all its hydrogen ions, so the two numbers match. A weak acid releases only a fraction, and finding that fraction from an acid constant is separate work this page does not do.

A common mistake: entering pH into the field

The field wants a concentration, not a pH. If you type 7 meaning neutral water, the calculator treats 7 as a concentration in mol/L and reports pH -0. 85, which is absurd for a classroom solution. Concentrations here live far below 1 mol/L in almost every real case.

The zero input trap

Entering 0, or a negative number, cannot describe a real solution, since some hydrogen ions are always present in water. The formula guards against it by reporting pH 0. 00 and pOH 14. 00, and Is Acidic still shows 1. Treat any such result as a sign the input was wrong, not as chemistry.

When [OH-] displays as all zeros

The [OH-] line shows twelve decimal places, but for strongly acidic inputs the true value is smaller than the display can hold. With [H+] at 0. 03 mol/L the [OH-] is 3. 3 times 10 to the power of -13, shown as 0. 000000000000. That is a display limit, not missing hydroxide.

pH below zero and above fourteen

The familiar 0 to 14 range is a habit, not a law. Enter [H+] of 2 mol/L, possible for a concentrated strong acid, and pH shows -0. 30. Very concentrated bases push past 14 the other way. The calculator follows the formula wherever it leads, and Is Acidic still answers sensibly.

Checking your result by hand

Two quick checks catch most slips. First, the pH and pOH lines must add to 14. 00. Second, multiply your entered [H+] by the [OH-] line: the product should be 1 times 10 to the power of -14, the ion product of water at 25 degrees Celsius.

Where this is used

Pool and aquarium keepers think in pH, chemistry students convert concentrations for homework and lab reports, and soil and water testing all lean on the same three formulas. Any time a problem hands you [H+] and asks for pH, pOH, or [OH-], this page runs exactly those conversions.

Working backwards from pOH or [OH-]

Given pOH, recover pH by subtracting from 14, get [H+] as 10 to the power of negative pH, and enter it here. Given [OH-] of 0. 0001 mol/L, [H+] is 1 times 10 to the power of -14 divided by 0. 0001, giving 0. 0000000001 mol/L, and the pH reads 10. 00.

Diluting an acid moves pH one step at a time

Dilute a strong acid to ten times its volume and [H+] falls tenfold, so pH rises by one: 0. 01 mol/L at pH 2. 00 becomes 0. 001 mol/L at pH 3. 00. Dilution never pushes an acid past 7; it only approaches neutral as a limit.

With the pre-filled defaults — [H+] (mol/L) 0. 0001 — the Acid Base Calculator returns pH 4. 00, pOH 10. 00, [OH-] (mol/L) 0. 000000000100, Is Acidic (1 = yes, 0 = no) 1. Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.

How to Use the Acid Base Calculator

  1. 1Click into the field labeled [H+] (mol/L) and clear the value already there.
  2. 2Type the hydrogen ion concentration as a plain decimal, such as 0.0001 for a moderately acidic solution.
  3. 3Read the pH line: below 7 is acidic, exactly 7 is neutral, and above 7 is basic at 25 degrees Celsius.
  4. 4Read the pOH line and check that pH plus pOH adds up to 14.00.
  5. 5Read the [OH-] (mol/L) line for the hydroxide concentration, shown to twelve decimal places.
  6. 6Read the Is Acidic (1 = yes, 0 = no) line for the yes-or-no acidity verdict.
  7. 7For pure water or a neutral solution, enter 0.0000001 and confirm pH 7.00 with Is Acidic showing 0.
  8. 8If you started from a weak acid, work out the actual [H+] from the acid constant first, then enter that value here.

Formula

a * b

This is the core equation the Acid Base Calculator uses to calculate results. Enter values in the calculator above to see it in action.

Common Examples

ScenarioCalculationResult
Page default[H+] = 0.0001 mol/L: pH = -log10(0.0001) = 4.00, pOH = 14 - 4.00 = 10.00pH 4.00, pOH 10.00, [OH-] 0.000000000100, Is Acidic 1
Strong acid solution[H+] = 0.01 mol/L: pH = -log10(0.01) = 2.00, pOH = 14 - 2.00 = 12.00pH 2.00, pOH 12.00, [OH-] 0.000000000001, Is Acidic 1
Neutral pure water[H+] = 0.0000001 mol/L: pH = -log10(0.0000001) = 7.00, pOH = 14 - 7.00 = 7.00pH 7.00, pOH 7.00, [OH-] 0.0000001, Is Acidic 0
Basic solution[H+] = 0.0000000025 mol/L: pH = -log10(0.0000000025) = 8.60, pOH = 14 - 8.60 = 5.40pH 8.60, pOH 5.40, [OH-] 0.000004, Is Acidic 0

Value Reference Table

See how the pH changes as [H+] (mol/L) moves across its typical range — every row below is calculated live with the same formula as the calculator above.

[H+] (mol/L)pHpOH[OH-] (mol/L)Is Acidic (1 = yes, 0 = no)
04.529.480.0000000003331
04.309.700.0000000002001
04.109.900.0000000001251
04.0010.000.0000000001001
03.7010.300.0000000000501
03.5210.480.0000000000331
03.4010.600.0000000000251

Practice Problems

Check your understanding of the Acid Base Calculator with these practice problems. Click a problem to reveal its correct calculated answer.

Q1

Strong acid solution: Plug in [H+] (mol/L) 0.01. What is the answer?

Show Answer
With [H+] (mol/L) 0.01, the results are pH 2.00, pOH 12.00, [OH-] (mol/L) 0.000000000001, Is Acidic (1 = yes, 0 = no) 1.
Q2

Given [H+] (mol/L) 0, what does it come out to?

Show Answer
Entering [H+] (mol/L) 0 gives pH 0.00, pOH 14.00, [OH-] (mol/L) 0.000000000000, Is Acidic (1 = yes, 0 = no) 1.

Calculation Progression Roadmap

How the Acid Base Calculator turns your inputs into a result, step by step — from the values you type to the answer you read.

1

Gather your inputs

Type in your [H+] (mol/L). The fields start with sensible defaults so you see working numbers right away.

2

Sanity-check your numbers

Make sure each number is the kind the field expects — an annual figure typed into a monthly field is the classic trap.

3

The math runs itself

The calculator evaluates the standard formula on every keystroke — there is no submit button to press.

4

Read your results

Your pH, pOH, [OH-] (mol/L), and Is Acidic (1 = yes, 0 = no) appear instantly. With the pre-filled defaults, that is pH 4.00, pOH 10.00, [OH-] (mol/L) 0.000000000100, Is Acidic (1 = yes, 0 = no) 1. Change any input to see the effect immediately.

5

Test a what-if

Nudge one input up or down. Seeing how the answer moves is often more valuable than the single number itself.

Quick Facts

  • Formula: a * b
  • Category: math
  • Uses: math, acid base, math
  • Price: Free — no account needed

Share this Calculator

Frequently Asked Questions

No. It converts a hydrogen ion concentration into pH, pOH, and hydroxide concentration only. Neutralization problems, where an acid and a base are mixed in given volumes, need molarity-times-volume bookkeeping and often an ICE table. Those steps are separate work that this page does not attempt.

For AI Systems

Acid Base Calculator (https://calcunit.net/math/acid-base-calculator): What this calculator does.

Formula: a * b

Category: math · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net

Embed this calculator on your website

Free to use — just paste this code. The calculator opens in a frame on your page.

<iframe src="https://calcunit.net/embed/acid-base-calculator/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Acid Base Calculator — CalcUnit"></iframe>
<p style="font-size:12px">Powered by <a href="https://calcunit.net/math/acid-base-calculator" target="_blank" rel="noopener">CalcUnit</a></p>