CalcUnit Logo

Remainder Theorem Calculator

What is the Remainder Theorem Calculator?

What this page divides

Enter the four coefficients of a cubic, P of x equals a x cubed plus b x squared plus c x plus d, and a root r, and this page divides the cubic by the bracket x minus r. It returns the remainder and the three quotient coefficients.

The theorem in one sentence

The remainder theorem says the remainder when a polynomial is divided by x minus r is simply the polynomial evaluated at r. No long division is needed for the remainder itself: substitute r for x, add up the powers, and that total is the remainder.

The default run, worked in full

The page opens with a 2, b 3, c 1, d 5, and r 2. P of 2 is 2 times 8, plus 3 times 4, plus 1 times 2, plus 5, which is 35. So the remainder is 35, the quotient coefficients are 2, 7, and 15, and the factor flag reads 0.

Where the quotient coefficients come from

The page runs synthetic division with r. Bring down a as the first quotient coefficient. Multiply it by r and add b for the second. Multiply that result by r and add c for the third. One more multiply and add would land on the remainder itself.

Reading the quotient you are given

The three coefficients belong to a polynomial one degree lower: 2 x squared plus 7 x plus 15 on the default run. Rebuild to check: x minus 2 times that quotient, plus the remainder 35, expands back to 2 x cubed plus 3 x squared plus x plus 5 exactly.

The factor flag

The line labeled Is a Factor reads 1 when the remainder is exactly zero and 0 otherwise. A factor means x minus r divides the cubic with nothing left over, which also means r is a root of the equation P of x equals zero. It is the fastest root test there is.

A clean factor, worked in full

Enter a 1, b negative 6, c 11, d negative 6, and r 1. The remainder is 0 and the flag reads 1, so x minus 1 is a factor. The quotient is x squared minus 5 x plus 6, which factors further into x minus 2 and x minus 3.

A negative root, worked in full

Enter a 1, b 2, c 0, d negative 3, and r negative 1, which divides by x plus 1. P of negative 1 is negative 1 plus 2 plus 0 minus 3, giving remainder negative 2. The quotient coefficients are 1, 1, and negative 1, and the flag reads 0.

Dividing by x plus k means r is negative

The divisor on this page is always written x minus r, so a divisor of x plus 3 corresponds to r equal to negative 3. Entering positive 3 instead answers the wrong question, about x minus 3. This sign slip is the single most common error with the remainder theorem.

Only cubics fit this page

There are exactly four coefficient fields, so the polynomial must be degree three. Quartics and higher cannot be entered. A degree four polynomial needs the same synthetic division done by hand, or divided one linear factor at a time with a cubic step in the middle done here.

A zero leading coefficient shrinks the degree

Enter a equal to 0 and the page quietly treats bx squared plus cx plus d as the polynomial, producing a linear quotient whose x squared coefficient reads 0. The remainder is still correct for that quadratic. It is a usable workaround, as long as you read the quotient as degree one.

Divisors like 2x minus 3 need one adjustment

The remainder when dividing by 2x minus 3 equals P of 1. 5, because 2x minus 3 is 2 times x minus 1. 5. So enter r 1. 5 and the Remainder line is correct. The quotient coefficients belong to division by x minus 1. 5, so halve each one.

Fractional roots work fine

Nothing forces r to be a whole number. With the default coefficients and r 0. 5, the remainder is 6. 5 and the quotient coefficients are 2, 4, and 3. Rational root hunting produces fractions like this constantly, so the page's decimal arithmetic is doing real work, not decoration.

Hunting roots before you divide

The rational root theorem narrows the candidates for r: factors of the constant d divided by factors of the leading coefficient a. For x cubed minus 6 x squared plus 11 x minus 6, that list is plus or minus 1, 2, 3, and 6. Test each as r here.

The factor flag uses an exact zero test

The flag reads 1 only when P of r is exactly zero, with no tolerance. Decimal coefficients can leave a remainder like 0. 0001 that is rounding dust rather than a true miss. Judge near misses by the size of the Remainder P(r) line itself, not by the flag alone.

From one factor to all the roots

Once the flag confirms a factor, solve the quotient. A quadratic quotient yields its two roots from the quadratic formula or by factoring, and together with r you hold all three roots of the cubic. That divide-and-conquer path is the standard way cubics are solved exactly in algebra courses.

The identity behind the whole page

Every run is one identity: P of x equals x minus r times the quotient, plus the remainder. The defaults give 2 x cubed plus 3 x squared plus x plus 5 equals x minus 2 times 2 x squared plus 7 x plus 15, plus 35.

The factor theorem is the same coin, flipped

Read the theorem backwards and it becomes the factor theorem: x minus r is a factor exactly when P of r is zero. The remainder answers the division question, the factor flag answers the factoring question, and both are the same substitution wearing two hats.

Chaining a second division

After a factor is found, the quotient is a quadratic, and this page can divide that too: copy its coefficients into b, c, and d, set a to 0, and test the next candidate root. Two chained runs factor a friendly cubic completely, using a page that officially handles only one division at a time.

Synthetic division is the same work, compressed

On paper, synthetic division writes only the coefficients in a row: bring the first down, multiply by r, add to the next, and continue across. The last total is the remainder and the earlier totals are the quotient coefficients, in order. This page runs that same row behind its five output lines.

What this page cannot do

It cannot divide by quadratics, cannot show the synthetic division grid, cannot repeat the process on its own quotient, and cannot handle degrees above three. Those steps stay manual: write the coefficients in a row, bring down, multiply by r, add, and repeat across.

With the pre-filled defaults — Coefficient a (x^3) 2, Coefficient b (x^2) 3, Coefficient c (x) 1, Constant d 5, Root r of (x - r) 2 — the Remainder Theorem Calculator returns Remainder P(r) 35. 0000, Quotient: x^2 Coefficient 2. 0000, Quotient: x Coefficient 7. 0000, Quotient: Constant 15. 0000, and 1 more more results.

Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.

How to Use the Remainder Theorem Calculator

  1. 1Enter the x cubed coefficient in the Coefficient a (x^3) field.
  2. 2Enter the remaining coefficients in the b, c, and Constant d fields, using 0 for any missing term.
  3. 3Enter r in the Root r of (x - r) field; for a divisor of (x + 2), that means r = -2.
  4. 4Read Remainder P(r) for the remainder of the division.
  5. 5Read the three Quotient lines, for the x squared coefficient, the x coefficient, and the constant.
  6. 6Check the (x - r) Is a Factor line: 1 means the division is exact and r is a root.
  7. 7Verify by multiplying the quotient by (x - r) and adding the remainder to rebuild your cubic.
  8. 8For a divisor like (2x - 3), enter r = 1.5 for a correct remainder, then halve the quotient coefficients.

Formula

a * b

This is the core equation the Remainder Theorem Calculator uses to calculate results. Enter values in the calculator above to see it in action.

Common Examples

ScenarioCalculationResult
x^3 - 6x^2 + 11x - 6 divided by (x - 1)P(1) = 1 - 6 + 11 - 6 = 0; quotient coefficients: a = 1, a r + b = 1 - 6 = -5, a r^2 + b r + c = 1 - 6 + 11 = 6Remainder P(r) 0, Quotient 1, -5, 6, Is a Factor 1
x^3 + 2x^2 - 3 divided by (x + 1), so r = -1P(-1) = -1 + 2 + 0 - 3 = -2; quotient coefficients: a = 1, a r + b = -1 + 2 = 1, a r^2 + b r + c = 1 - 2 + 0 = -1Remainder P(r) -2, Quotient 1, 1, -1, Is a Factor 0
3x^3 - 4x + 8 divided by (x - 2)P(2) = 3 x 8 + 0 x 4 - 4 x 2 + 8 = 24 - 8 + 8 = 24; quotient coefficients: a = 3, a r + b = 6 + 0 = 6, a r^2 + b r + c = 12 + 0 - 4 = 8Remainder P(r) 24, Quotient 3, 6, 8, Is a Factor 0
x^3 - 2x^2 - 5x + 6 divided by (x - 3)P(3) = 27 - 18 - 15 + 6 = 0; quotient coefficients: a = 1, a r + b = 3 - 2 = 1, a r^2 + b r + c = 9 - 6 - 5 = -2Remainder P(r) 0, Quotient 1, 1, -2, Is a Factor 1

Value Reference Table

See how the Remainder P(r) changes as Coefficient a (x^3) moves across its typical range — every row below is calculated live with the same formula as the calculator above.

Coefficient a (x^3)Remainder P(r)Quotient: x^2 CoefficientQuotient: x CoefficientQuotient: Constant(x - r) Is a Factor? (1 = yes, 0 = no)
0.523.00000.50004.00009.00000
127.00001.00005.000011.00000
235.00002.00007.000015.00000
343.00003.00009.000019.00000
451.00004.000011.000023.00000
559.00005.000013.000027.00000
667.00006.000015.000031.00000
883.00008.000019.000039.00000

Practice Problems

Check your understanding of the Remainder Theorem Calculator with these practice problems. Click a problem to reveal its correct calculated answer.

Q1

x^3 - 6x^2 + 11x - 6 divided by (x - 1): You enter Coefficient a (x^3) 1, Coefficient b (x^2) -6, Coefficient c (x) 11, Constant d -6, Root r of (x - r) 1 — what does the calculator return?

Show Answer
The calculator returns Remainder P(r) 0.0000, Quotient: x^2 Coefficient 1.0000, Quotient: x Coefficient -5.0000, Quotient: Constant 6.0000, and 1 more more results for Coefficient a (x^3) 1, Coefficient b (x^2) -6, Coefficient c (x) 11, Constant d -6, Root r of (x - r) 1.
Q2

With Coefficient a (x^3) 1.25, Coefficient b (x^2) 2, Coefficient c (x) 0, Constant d -3, Root r of (x - r) -1, what are the results?

Show Answer
With Coefficient a (x^3) 1.25, Coefficient b (x^2) 2, Coefficient c (x) 0, Constant d -3, Root r of (x - r) -1, the results are Remainder P(r) -2.2500, Quotient: x^2 Coefficient 1.2500, Quotient: x Coefficient 0.7500, Quotient: Constant -0.7500, and 1 more more results.

Calculation Progression Roadmap

How the Remainder Theorem Calculator turns your inputs into a result, step by step — from the values you type to the answer you read.

1

Gather your inputs

Type in your Coefficient a (x^3), Coefficient b (x^2), Coefficient c (x), Constant d, and Root r of (x - r). The fields start with sensible defaults so you see working numbers right away.

2

Sanity-check your numbers

Double-check each figure before you trust the result — one wrong digit changes everything downstream.

3

The math runs itself

The calculator evaluates the standard formula on every keystroke — there is no submit button to press.

4

Read your results

Your Remainder P(r), Quotient: x^2 Coefficient, Quotient: x Coefficient, Quotient: Constant, and (x - r) Is a Factor? (1 = yes, 0 = no) appear instantly. With the pre-filled defaults, that is Remainder P(r) 35.0000, Quotient: x^2 Coefficient 2.0000, Quotient: x Coefficient 7.0000, Quotient: Constant 15.0000, and 1 more more results. Change any input to see the effect immediately.

5

Test a what-if

Change a single input and watch which outputs move. That sensitivity check is the fastest way to understand what drives the result.

Real-World Examples

Fresh scenarios — starting with double-checking a spreadsheet — worked through with different numbers than the examples above, so you can watch the formula handle new situations.

1

Double-checking a spreadsheet

A quick run with Coefficient a (x^3) 4, Coefficient b (x^2) 3, Coefficient c (x) 1, Constant d 5, Root r of (x - r) 2 gives Remainder P(r) 51.0000, Quotient: x^2 Coefficient 4.0000, Quotient: x Coefficient 11.0000, Quotient: Constant 23.0000, and 1 more more results.

2

Settling a debate

With Coefficient a (x^3) 1, Coefficient b (x^2) 3, Coefficient c (x) 1, Constant d 5, Root r of (x - r) 2, the calculator returns Remainder P(r) 27.0000, Quotient: x^2 Coefficient 1.0000, Quotient: x Coefficient 5.0000, Quotient: Constant 11.0000, and 1 more more results.

3

Quick mental-math verify

Plug in Coefficient a (x^3) 3, Coefficient b (x^2) 3, Coefficient c (x) 1, Constant d 5, Root r of (x - r) 2 and you get Remainder P(r) 43.0000, Quotient: x^2 Coefficient 3.0000, Quotient: x Coefficient 9.0000, Quotient: Constant 19.0000, and 1 more more results.

Quick Facts

  • Formula: a * b
  • Category: math
  • Uses: math, remainder theorem, math
  • Price: Free — no account needed

Share this Calculator

Frequently Asked Questions

When you divide a polynomial by x minus r, the remainder is exactly the value of the polynomial at r. Instead of doing long division, substitute r for x and add up the terms. If that total is zero, x minus r is a factor and r is a root.

For AI Systems

Remainder Theorem Calculator (https://calcunit.net/math/remainder-theorem-calculator): What this page divides.

Formula: a * b

Category: math · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net

Embed this calculator on your website

Free to use — just paste this code. The calculator opens in a frame on your page.

<iframe src="https://calcunit.net/embed/remainder-theorem-calculator/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Remainder Theorem Calculator — CalcUnit"></iframe>
<p style="font-size:12px">Powered by <a href="https://calcunit.net/math/remainder-theorem-calculator" target="_blank" rel="noopener">CalcUnit</a></p>