CalcUnit Logo

Reactance Calculator

What is the Reactance Calculator?

What this calculator computes

Give it a frequency, an inductance, and a capacitance, and this page returns three results in ohms: the inductive reactance, the capacitive reactance, and their net reactance in a series circuit. It is a component level tool for AC work, built on the two standard reactance formulas used throughout electronics.

The three inputs it asks for

The Component Values group holds Frequency in hertz, opening at 1000, Inductance in henries, opening at 0. 01, and Capacitance in farads, opening at 0. 000001. You enter real component values here, not ready made reactances, so every unit conversion has to happen before you type the numbers in.

The unit trap: henries and farads only

Datasheets rarely speak in henries and farads. Convert first: 10 millihenries is 0. 01 henries, 100 microhenries is 0. 0001 henries, 1 microfarad is 0. 000001 farads, 470 nanofarads is 0. 00000047 farads, and 100 picofarads is 0. 0000000001 farads. Typing 470 for a 470 nanofarad part overshoots wildly.

How inductive reactance is computed

An inductor resists change, and its opposition grows in direct proportion to frequency. The formula is XL equals 2 pi times frequency times inductance. Double the frequency or double the coil size and the inductive reactance doubles with it. At direct current, frequency zero, an ideal inductor offers no reactance at all.

How capacitive reactance is computed

A capacitor behaves the opposite way. The formula is XC equals 1 divided by 2 pi times frequency times capacitance. Raise the frequency or fit a bigger capacitor and the capacitive reactance falls. At very high frequencies an ideal capacitor's reactance shrinks toward zero, which is why capacitors pass AC and block DC.

What the page shows on its default run

With the opening values of 1000 hertz, 0. 01 henries, and 0. 000001 farads, Inductive Reactance XL reads 62. 8319 ohms and Capacitive Reactance XC reads 159. 1549 ohms. Net Reactance reads negative 96. 3231 ohms. The capacitor is winning at this frequency, so the series combination behaves net capacitive overall.

Reading the sign of the net reactance

Net Reactance is simply XL minus XC, so its sign tells you which component dominates. A positive result means the inductor dominates and the circuit looks inductive. A negative result, like the default run, means the capacitor dominates. A result of exactly zero marks the special balance point covered below.

Worked example: a mains frequency stage

Enter Frequency 60, Inductance 0. 25, and Capacitance 0. 00001, a 10 microfarad part. XL reads 94. 2478 ohms, XC reads 265. 2582 ohms, and Net Reactance reads negative 171. 0105 ohms. At mains frequency a modest capacitor presents far more reactance than a quarter henry coil, so the net stays firmly capacitive.

Worked example: a radio frequency stage

Enter Frequency 1500000, Inductance 0. 000075 (75 microhenries), and Capacitance 0. 000000000082 (82 picofarads). XL reads 706. 8583 ohms, XC reads 1293. 9426 ohms, and Net Reactance reads negative 587. 0843 ohms. Even at 1. 5 megahertz this tiny capacitor still dominates, because its reactance falls slowly from a very high starting value.

Where the two reactances cancel: resonance

Set the two formulas equal and the crossover frequency is 1 divided by 2 pi times the square root of inductance times capacitance. For the default parts that is about 1591. 5494 hertz. Enter it and XL reads 100 ohms, XC reads 100 ohms, and Net Reactance reads 0 at display precision.

Why resonance matters in practice

At resonance a series inductor and capacitor stop opposing each other, leaving only resistance to limit current. Radio tuners exploit this to select one station frequency, and power engineers fear it because currents and voltages can surge. This page finds the balance point, but it cannot size those surges.

The zero guard on capacitive reactance

If frequency or capacitance is zero, the XC formula would divide by zero, so the page guards it and prints XC as 0. Read that zero with care: it is a placeholder, not physics. A capacitor of zero farads is an open circuit, whose true reactance is infinite, not zero.

What zero frequency really means

Enter Frequency 0 and XL honestly reads 0, because an ideal inductor is a plain wire to direct current. The guarded XC also reads 0, but that one is false: a real capacitor blocks direct current completely, so its reactance at zero frequency is infinite. Never quote the XC line from a zero frequency run.

Total impedance needs resistance, added by hand

This page has no resistance field, so it cannot give total impedance or phase angle. Combine its net reactance with your resistance yourself: impedance equals the square root of R squared plus net reactance squared. With 50 ohms of resistance and the default net, that is the square root of 11778. 14, about 108. 5271 ohms.

How the pair moves as frequency changes

Try Frequency 2000 with the default parts. XL doubles to 125. 6637 ohms while XC halves to 79. 5775 ohms, and Net Reactance flips to positive 46. 0862 ohms. One part rises and the other falls at the same rate, which is why every inductor capacitor pair crosses at exactly one resonant frequency.

Two anchor values worth memorizing

A 1 henry coil at 60 hertz has an inductive reactance of 376. 9911 ohms. A 1 microfarad capacitor at the same 60 hertz has a capacitive reactance of 2652. 5824 ohms. Scaling from these anchors by proportion lets you sanity check any run on this page in seconds, before trusting the display.

Series subtraction is the picture here

The net line subtracts the reactances, which is the series circuit picture: the same current flows through both parts and their voltage drops oppose. Inductor and capacitor pairs wired in parallel behave very differently and can circulate large currents between themselves at resonance. Do not apply this page's subtraction to a parallel pair.

No validation on extreme or negative inputs

The fields accept whatever you type. A negative frequency returns a negative inductive reactance and a positive looking capacitive figure, neither of which means anything physically. Enormous frequencies produce enormous or tiny reactances without warning. The page does arithmetic only; judging whether the inputs describe a real circuit stays with you.

Real parts are not ideal parts

The formulas assume a perfect coil with no wire resistance and a perfect capacitor with no leakage or series resistance. Real inductors carry meaningful winding resistance, and real capacitors fall short of their printed value by their tolerance band, often 10 or 20 percent. Treat results as the ideal center of a range.

The bottom line

Use this page to turn a frequency and two component values into inductive, capacitive, and net reactance in ohms. Convert milli, micro, nano, and pico units to henries and farads first, watch the sign of the net line, distrust any XC of zero, and add resistance by hand when you need full impedance.

With the pre-filled defaults — Frequency 1,000Hz, Inductance 0. 01H, Capacitance 0. 000001F — the Reactance Calculator returns Inductive Reactance XL 62. 8319Ω, Capacitive Reactance XC 159. 1549Ω, Net Reactance (XL − XC) -96. 3231Ω. Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.

How to Use the Reactance Calculator

  1. 1Enter the signal frequency in the Frequency field, in hertz.
  2. 2Convert your coil value to henries and enter it in the Inductance field.
  3. 3Convert your capacitor value to farads and enter it in the Capacitance field.
  4. 4Read the Inductive Reactance XL line for the coil's opposition in ohms.
  5. 5Read the Capacitive Reactance XC line for the capacitor's opposition in ohms.
  6. 6Read the Net Reactance (XL minus XC) line and note its sign: positive is net inductive, negative is net capacitive.
  7. 7If XC reads 0, check whether Frequency or Capacitance is zero; that zero is a guard placeholder, not a real reactance.
  8. 8For total impedance, combine the net reactance with your circuit resistance by hand: square root of R squared plus X squared.

Formula

a * b

This is the core equation the Reactance Calculator uses to calculate results. Enter values in the calculator above to see it in action.

Common Examples

ScenarioCalculationResult
Page defaults, 1 kHz with a 10 millihenry coil and 1 microfarad capacitorFrequency 1000, Inductance 0.01, Capacitance 0.000001: XL = 2 pi x 1000 x 0.01 = 62.8319, XC = 1 / (2 pi x 1000 x 0.000001) = 159.1549Inductive Reactance 62.8319 ohms, Capacitive Reactance 159.1549 ohms, Net Reactance -96.3231 ohms
Mains frequency stage, 60 hertzFrequency 60, Inductance 0.25, Capacitance 0.00001: XL = 2 pi x 60 x 0.25 = 94.2478, XC = 1 / (2 pi x 60 x 0.00001) = 265.2582Inductive Reactance 94.2478 ohms, Capacitive Reactance 265.2582 ohms, Net Reactance -171.0105 ohms
Radio frequency stage, 1.5 megahertzFrequency 1500000, Inductance 0.000075, Capacitance 0.000000000082: XL = 2 pi x 1500000 x 0.000075 = 706.8583, XC = 1 / (2 pi x 1500000 x 0.000000000082) = 1293.9426Inductive Reactance 706.8583 ohms, Capacitive Reactance 1293.9426 ohms, Net Reactance -587.0843 ohms
Resonance with the default partsFrequency 1591.5494, Inductance 0.01, Capacitance 0.000001: XL = 2 pi x 1591.5494 x 0.01 = 100, XC = 1 / (2 pi x 1591.5494 x 0.000001) = 100Inductive Reactance 100 ohms, Capacitive Reactance 100 ohms, Net Reactance 0 ohms at display precision

Value Reference Table

See how the Inductive Reactance XL changes as Frequency moves across its typical range — every row below is calculated live with the same formula as the calculator above.

FrequencyInductive Reactance XLCapacitive Reactance XCNet Reactance (XL − XC)
300 Hz18.8496530.5165-511.6669
500 Hz31.4159318.3099-286.8940
800 Hz50.2655198.9437-148.6782
1,000 Hz62.8319159.1549-96.3231
2,000 Hz125.663779.577546.0862
3,000 Hz188.495653.0516135.4439
4,000 Hz251.327439.7887211.5387

Practice Problems

Check your understanding of the Reactance Calculator with these practice problems. Click a problem to reveal its correct calculated answer.

Q1

Mains frequency coil: You enter Frequency 50Hz, Inductance 0.1H, Capacitance 0.00001F — what does the calculator return?

Show Answer
Entering Frequency 50Hz, Inductance 0.1H, Capacitance 0.00001F gives Inductive Reactance XL 31.4159Ω, Capacitive Reactance XC 318.3099Ω, Net Reactance (XL − XC) -286.8940Ω.
Q2

With Frequency 6,250Hz, Inductance 0.02H, Capacitance 0F, what are the results?

Show Answer
The calculator returns Inductive Reactance XL 785.3982Ω, Capacitive Reactance XC 54.1804Ω, Net Reactance (XL − XC) 731.2178Ω for Frequency 6,250Hz, Inductance 0.02H, Capacitance 0F.

Calculation Progression Roadmap

How the Reactance Calculator turns your inputs into a result, step by step — from the values you type to the answer you read.

1

Gather your inputs

Type in your Frequency, Inductance, and Capacitance. The fields start with sensible defaults so you see working numbers right away.

2

Sanity-check your numbers

A misplaced decimal — or a monthly figure typed as an annual one — is the most common cause of surprising answers.

3

The math runs itself

The calculator evaluates 2 × pi × Frequency × Inductance on every keystroke — there is no submit button to press.

4

Read your results

Your Inductive Reactance XL, Capacitive Reactance XC, and Net Reactance (XL − XC) appear instantly. With the pre-filled defaults, that is Inductive Reactance XL 62.8319Ω, Capacitive Reactance XC 159.1549Ω, Net Reactance (XL − XC) -96.3231Ω. Change any input to see the effect immediately.

5

Test a what-if

Try a bigger and a smaller value for one input. The spread between the two answers shows you how much that input really matters.

Real-World Examples

Fresh scenarios — starting with double-checking a spreadsheet — worked through with different numbers than the examples above, so you can watch the formula handle new situations.

1

Double-checking a spreadsheet

A quick run with Frequency 2,000Hz, Inductance 0.01H, Capacitance 0.000001F gives Inductive Reactance XL 125.6637Ω, Capacitive Reactance XC 79.5775Ω, Net Reactance (XL − XC) 46.0862Ω.

2

Settling a debate

With Frequency 500Hz, Inductance 0.01H, Capacitance 0.000001F, the calculator returns Inductive Reactance XL 31.4159Ω, Capacitive Reactance XC 318.3099Ω, Net Reactance (XL − XC) -286.8940Ω.

3

Quick mental-math verify

Plug in Frequency 1,500Hz, Inductance 0.01H, Capacitance 0.000001F and you get Inductive Reactance XL 94.2478Ω, Capacitive Reactance XC 106.1033Ω, Net Reactance (XL − XC) -11.8555Ω.

Quick Facts

  • Formula: a * b
  • Category: math
  • Uses: math, reactance, math
  • Price: Free — no account needed

Share this Calculator

Frequently Asked Questions

Reactance is the opposition an inductor or capacitor offers to alternating current, measured in ohms like resistance. Unlike resistance it stores and returns energy instead of burning it as heat, and its size depends on the signal frequency. Inductors resist more as frequency rises; capacitors resist less.

For AI Systems

Reactance Calculator (https://calcunit.net/math/reactance-calculator): What this calculator computes.

Formula: a * b

Category: math · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net

Embed this calculator on your website

Free to use — just paste this code. The calculator opens in a frame on your page.

<iframe src="https://calcunit.net/embed/reactance-calculator/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Reactance Calculator — CalcUnit"></iframe>
<p style="font-size:12px">Powered by <a href="https://calcunit.net/math/reactance-calculator" target="_blank" rel="noopener">CalcUnit</a></p>