Non Right Triangle Calculator
What is the Non Right Triangle Calculator?
What this calculator does
Give this page the three side lengths of a triangle and it solves the whole figure: the semiperimeter, the area, and all three angles in degrees. It opens with sides 5, 6, and 7, a scalene triangle with no right angle, and returns an area of 14. 6969 square units.
Three sides are the only inputs
The fields are Side A, Side B, and Side C, and that is all the page accepts. This is the SSS case of triangle solving: side, side, side. There are no angle fields anywhere, so problems stated with angles must be converted into sides before this page can help.
What it returns
Results come back as Semiperimeter, Area (Heron), Angle A, Angle B, and Angle C, each printed to four decimal places. The angles arrive in degrees only; there is no radians option. The plain perimeter is not listed, but it is simply twice the semiperimeter shown.
Each angle sits opposite its side
Angle A is the corner across from Side A, Angle B faces Side B, and Angle C faces Side C. This pairing drives every formula on the page. If your diagram labels the sides differently, rename your lengths to match before typing, or the angles will attach to the wrong corners.
The semiperimeter comes first
The page starts by halving the perimeter: s equals (a + b + c) / 2. For the defaults, (5 + 6 + 7) / 2 gives 9. 0000. This single number feeds Heron's area formula, so the page computes it before anything else. It is a helper quantity, not a measurement you would pace off.
Area from Heron's formula
Heron's formula builds the area from the sides alone: the square root of s times (s - a) times (s - b) times (s - c). For the defaults that is the square root of 9 x 4 x 3 x 2, or the square root of 216, giving 14. 6969. No height is ever needed.
Angles from the law of cosines
With no right angle guaranteed, the law of cosines does the work that tangent and sine ratios cannot. Angle A is the arccosine of (b squared + c squared - a squared) / (2bc), converted to degrees. The defaults give Angle A as 44. 4153 degrees and Angle B as 57. 1217 degrees.
Angle C by subtraction
The third angle is not computed with its own arccosine. The page subtracts: Angle C equals 180 minus Angle A minus Angle B. For any valid triangle this matches the direct law-of-cosines value to the printed precision; the defaults give 78. 4630 degrees. It is a shortcut, but an exact one for real triangles.
Worked example: the default 5-6-7 triangle
Enter Side A 5, Side B 6, and Side C 7. The page returns Semiperimeter 9. 0000, Area 14. 6969, Angle A 44. 4153 degrees, Angle B 57. 1217 degrees, and Angle C 78. 4630 degrees. All three angles are acute, so this triangle leans in every direction without toppling past ninety.
Worked example: a longer scalene triangle
Enter Side A 8, Side B 11, and Side C 13. The page returns Semiperimeter 16. 0000, Area 43. 8178, Angle A 37. 7949 degrees, Angle B 57. 4210 degrees, and Angle C 84. 7841 degrees. The largest angle, C, faces the longest side, 13, exactly as the naming rule promises.
Worked example: an obtuse triangle
Enter Side A 4, Side B 6, and Side C 9. The page returns Semiperimeter 9. 5000, Area 9. 5623, Angle A 20. 7419 degrees, Angle B 32. 0892 degrees, Angle C 127. 1689 degrees. Angle C is obtuse, and the law of cosines handles it without complaint, because arccosine covers angles up to 180.
Worked example: an isosceles triangle
Enter Side A 5. 5, Side B 5. 5, and Side C 8. The page returns Semiperimeter 9. 5000, Area 15. 0997, Angle A 43. 3418 degrees, Angle B 43. 3418 degrees, and Angle C 93. 3165 degrees. Equal sides face equal angles, so A and B match exactly, a quick check on your typing.
The triangle inequality, checked by hand
Three lengths form a triangle only when each pair sums to more than the third: a + b over c, a + c over b, b + c over a. Check this before entering anything. The page does not run this test for you, and the next section shows what happens when the test fails.
Impossible sides are clamped, not flagged
Enter sides 2, 3, and 9, which cannot form a triangle: 2 + 3 falls short of 9. The page prints numbers anyway: Area 0. 0000, angles 0. 0000, 0. 0000, and 180. 0000 degrees. Its formulas clamp out-of-range values instead of flagging an error, so treat that flat pattern as failure's signal.
A flat triangle is a boundary case
Sides 2, 3, and 5 exactly satisfy a + b equal to c, so the triangle collapses into a straight segment. Area 0 and angles 0, 0, and 180 are genuinely correct there, as a degenerate limit. Anything beyond that boundary, like 2, 3, and 9, is not a triangle at all.
No angle inputs, stated plainly
If your problem gives two sides and the included angle (SAS), or a side with two angles (ASA), this page cannot take it directly. First find the missing side by hand: for SAS, c equals the square root of a squared + b squared minus 2ab times the cosine of the included angle.
A SAS conversion worked by hand
Suppose sides 5 and 7 meet at 60 degrees. The third side is the square root of 25 + 49 - 2 x 5 x 7 x cos(60); cos(60) is 0. 5, so it is the square root of 39, about 6. 2450. Enter 5, 7, and 6. 2450 and the page finishes it.
Units must match across all three sides
Enter every side in the same unit, whether inches, feet, or meters. The area then comes out in that unit squared, so feet give square feet. Mixing units, like two sides in inches and one in centimeters, produces confident nonsense, because the page has no unit fields and cannot convert for you.
Rounding at four decimal places
Angles and area print to four decimals, which is far beyond tape-measure precision. Because each angle rounds separately, the three displayed angles can total 179. 9999 or 180. 0001 instead of exactly 180. That is display rounding, not an error in the solving, and it never affects the area.
Right triangles work here too
Despite the name, nothing stops you entering a right triangle: sides 3, 4, and 5 return Angle C of exactly 90. 0000 degrees and an area of 6. 0000. The law of cosines covers the right case as a special case. The name only promises that no right angle is assumed.
Where three-side solving is used
Surveyors recover a plot's angles from chained side measurements, carpenters check triangular trusses and braces, and hikers triangulate from measured legs. In each case the sides are what can be measured directly with a tape or a laser, and the angles are what the page supplies afterward.
What the page leaves out
There are no heights or altitudes, no medians, no circumradius or inradius, and no perimeter line of its own. Coordinates cannot be entered either; if your triangle is given as three points, measure or compute the three side lengths first, then enter them here.
Common mistakes to avoid
The classic slips are entering an angle into a side field, mixing units between fields, and trusting the output for sides that fail the triangle inequality. A fourth is relabeling: if your Side C is opposite the angle you care about, that angle is the page's Angle C, whatever your diagram calls it.
With the pre-filled defaults — Side A 5, Side B 6, Side C 7 — the Non Right Triangle Calculator returns Semiperimeter 9. 0000, Area (Heron) 14. 6969, Angle A 44. 4153°, Angle B 57. 1217°, Angle C 78. 4630°.
Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.
How to Use the Non Right Triangle Calculator
- 1Gather all three side lengths of your triangle, measured or given in the same unit.
- 2Check the triangle inequality by hand: each pair of sides must sum to more than the third side.
- 3Enter the first length in the Side A field; its opposite angle will be reported as Angle A.
- 4Enter the second length in the Side B field, and the third in the Side C field.
- 5Read Semiperimeter, then Area (Heron), which is built from the semiperimeter and the three sides.
- 6Read Angle A, Angle B, and Angle C, each in degrees and each opposite the side with the same letter.
- 7Sanity-check the angles: they should total 180, and the largest angle should face the longest side.
- 8If the area shows 0.0000 with angles 0, 0, and 180, your sides cannot form a triangle; re-check them.
Formula
This is the core equation the Non Right Triangle Calculator uses to calculate results. Enter values in the calculator above to see it in action.
Common Examples
| Scenario | Calculation | Result |
|---|---|---|
| Page default triangle | Sides 5, 6, 7: s = (5 + 6 + 7) / 2 = 9, area = sqrt(9 x 4 x 3 x 2) = sqrt(216) | Semiperimeter 9.0000, Area 14.6969, Angle A 44.4153, Angle B 57.1217, Angle C 78.4630 |
| Longer scalene triangle | Sides 8, 11, 13: s = 16, area = sqrt(16 x 8 x 5 x 3) = sqrt(1920) | Semiperimeter 16.0000, Area 43.8178, Angle A 37.7949, Angle B 57.4210, Angle C 84.7841 |
| Obtuse triangle | Sides 4, 6, 9: s = 9.5, area = sqrt(9.5 x 5.5 x 3.5 x 0.5), angle C from 180 - A - B | Semiperimeter 9.5000, Area 9.5623, Angle A 20.7419, Angle B 32.0892, Angle C 127.1689 |
| Isosceles triangle | Sides 5.5, 5.5, 8: s = 9.5, area = sqrt(9.5 x 4 x 4 x 1.5) = sqrt(228), equal sides face equal angles | Semiperimeter 9.5000, Area 15.0997, Angle A 43.3418, Angle B 43.3418, Angle C 93.3165 |
Value Reference Table
See how the Semiperimeter changes as Side A moves across its typical range — every row below is calculated live with the same formula as the calculator above.
| Side A | Semiperimeter | Area (Heron) | Angle A | Angle B | Angle C |
|---|---|---|---|---|---|
| 1 | 7.0000 | 0.0000 | 0.0000 | 0.0000 | 180.0000 |
| 3 | 8.0000 | 8.9443 | 25.2088 | 58.4119 | 96.3794 |
| 4 | 8.5000 | 11.9765 | 34.7719 | 58.8114 | 86.4167 |
| 5 | 9.0000 | 14.6969 | 44.4153 | 57.1217 | 78.4630 |
| 6 | 9.5000 | 17.0569 | 54.3147 | 54.3147 | 71.3707 |
| 8 | 10.5000 | 20.3332 | 75.5225 | 46.5675 | 57.9100 |
| 10 | 11.5000 | 20.6625 | 100.2866 | 36.1823 | 43.5312 |
| 20 | 16.5000 | 0.0000 | 180.0000 | 0.0000 | 0.0000 |
Practice Problems
Check your understanding of the Non Right Triangle Calculator with these practice problems. Click a problem to reveal its correct calculated answer.
7-8-9 triangle: Plug in Side A 7, Side B 8, Side C 9. What is the answer?
Show AnswerHide Answer
Given Side A 5, Side B 6, Side C 8, what does it come out to?
Show AnswerHide Answer
Calculation Progression Roadmap
How the Non Right Triangle Calculator turns your inputs into a result, step by step — from the values you type to the answer you read.
Gather your inputs
Type in your Side A, Side B, and Side C. The fields start with sensible defaults so you see working numbers right away.
Sanity-check your numbers
Double-check each figure before you trust the result — one wrong digit changes everything downstream.
The math runs itself
The calculator evaluates (Side A + Side B + Side C) ÷ 2 on every keystroke — there is no submit button to press.
Read your results
Your Semiperimeter, Area (Heron), Angle A, Angle B, and Angle C appear instantly. With the pre-filled defaults, that is Semiperimeter 9.0000, Area (Heron) 14.6969, Angle A 44.4153°, Angle B 57.1217°, Angle C 78.4630°. Change any input to see the effect immediately.
Test a what-if
Change a single input and watch which outputs move. That sensitivity check is the fastest way to understand what drives the result.
Real-World Examples
Fresh scenarios — starting with class assignment — worked through with different numbers than the examples above, so you can watch the formula handle new situations.
Class assignment
Enter Side A 10, Side B 6, Side C 7 — the answer comes out to Semiperimeter 11.5000, Area (Heron) 20.6625, Angle A 100.2866°, Angle B 36.1823°, Angle C 43.5312°.
Homework check
For Side A 2.5, Side B 6, Side C 7, expect Semiperimeter 7.7500, Area (Heron) 7.3077, Angle A 20.3641°, Angle B 56.6330°, Angle C 103.0029°.
Double-checking a spreadsheet
A quick run with Side A 7.5, Side B 6, Side C 7 gives Semiperimeter 10.2500, Area (Heron) 19.7317, Angle A 69.9853°, Angle B 48.7364°, Angle C 61.2783°.
Quick Facts
- Formula:
a * b - Category: math
- Uses: math, non right triangle, math
- Price: Free — no account needed
Frequently Asked Questions
SSS means the three sides are known: side, side, side. Three sides fix a triangle completely, so the angles and area follow. Yes, it is the only case here; the page has fields for Side A, Side B, and Side C and nothing else. Angle-based cases need a conversion first.
For AI Systems
Non Right Triangle Calculator (https://calcunit.net/math/non-right-triangle-calculator): What this calculator does.
Formula: a * b
Category: math · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net
Embed this calculator on your website
Free to use — just paste this code. The calculator opens in a frame on your page.
<iframe src="https://calcunit.net/embed/non-right-triangle-calculator/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Non Right Triangle Calculator — CalcUnit"></iframe> <p style="font-size:12px">Powered by <a href="https://calcunit.net/math/non-right-triangle-calculator" target="_blank" rel="noopener">CalcUnit</a></p>
