CalcUnit Logo

Law Of Sines Calculator

What is the Law Of Sines Calculator?

What this calculator does

Give it two angles of a triangle and the side opposite one of them, and this page solves the whole triangle. It finds the shared law-of-sines ratio, the second side, the third angle, and the third side, each shown to four decimal places. This is the angle-angle-side case, known as AAS.

The setup it accepts, stated plainly

The inputs are Angle A, Side a, and Angle B, where Side a must sit opposite Angle A. That is the only pattern this page knows. There is no field for a second side, which matters more than it first appears, because it decides which classic trap this solver can never fall into.

The trap this page cannot fall into

Textbooks warn about the ambiguous case: two triangles from one set of measurements. That trap springs only when a solver works backward from sides to an angle through an arcsine. This page never takes an arcsine. Its third angle comes from subtracting from 180, so one input set always yields exactly one triangle.

The three inputs it asks for

Angle A opens at 30 degrees, Side a at 10, and Angle B at 45 degrees. Angles are entered in degrees, as the degree suffixes on the fields say, and the side can be in any length unit you like, provided you read the solved sides in that same unit afterward.

Reading the four result lines

Ratio a / sin(A) is the shared proportion every side and sine pair in the triangle obeys. Side b is the side opposite Angle B. Angle C is whatever is left of 180 degrees. Side c is the side opposite Angle C, completing the triangle you started with just three numbers.

Worked example: the page default

With A at 30 degrees, side a at 10, and B at 45 degrees, the ratio is 20. 0000 and side b is 14. 1421. Angle C is 105. 0000 degrees, and side c is 19. 3185. An audit: side b divided by sin 45 returns that ratio, 20. 0000, exactly as the law promises.

Worked example: a sharper pair of angles

Enter A of 45 degrees, side a of 8, and B of 60 degrees. The ratio is 11. 3137, side b is 9. 7980, angle C is 75. 0000 degrees, and side c is 10. 9282. Larger angles opposite a fixed side shrink the ratio, because the same side subtends a wider opening.

Worked example: an obtuse angle B

Enter A of 20 degrees, side a of 5, and B of 100 degrees. The ratio is 14. 6190, side b is 14. 3969, angle C is 60. 0000 degrees, and side c is 12. 6604. An obtuse angle is no obstacle: the law of sines handles blunt triangles as happily as sharp ones.

Worked example: the equilateral check

Enter A of 60 degrees, side a of 12, and B of 60 degrees. The ratio is 13. 8564, and both answers land on the starting values: side b is 12. 0000, angle C is 60. 0000 degrees, and side c is 12. 0000. When a solver reproduces an equilateral triangle, its proportions are right.

The shared ratio is the circumdiameter

The ratio line hides a geometric celebrity: a over sin A equals the diameter of the triangle's circumscribed circle, often written 2R. The default triangle's ratio of 20. 0000 means its circumcircle has diameter 20 and radius 10. Every solved triangle on this page quietly reports its circumsize.

Why angle C needs no arcsine

Angle C is defined as 180 minus A minus B, plain subtraction of the two angles you supplied. Subtraction has one answer, never two, which is the entire reason the ambiguous case cannot arise here. The uncertainty textbooks attach to the law of sines belongs to a different problem pattern than this one.

The ambiguous case, worked by hand

Suppose you know A of 30 degrees, side a of 10, and side b of 16: the SSA pattern this page cannot accept. By hand, sin B equals 16 times sin 30 over 10, which is 0. 8. Two angles have that sine: 53. 1301 and 126. 8699 degrees, and both fit beside A.

Both triangles from that one dataset

Continuing by hand: with B at 53. 1301 degrees, angle C is 96. 8699 degrees and side c is 19. 8564. With B at 126. 8699 degrees, angle C is 23. 1301 degrees and side c is 7. 8564. Same givens, two triangles. An SSA solver silent about one hides half the truth.

When SSA gives one triangle, or none

The test is the value of sin B. If side b times sin A over side a exceeds 1, no angle has that sine and no triangle exists: side a of 5 against side b of 16 at A 30 gives 1. 6, an impossibility. If it equals 1, one right triangle survives.

The impossible-angles trap

The page checks that the angles leave room for a third. Enter A of 100 and B of 90 degrees, with side a of 10, and the Angle C and Side c lines show dashes instead of a negative angle and a negative length.

Angles summing to 180 or more describe no triangle, so the page prints no third angle and no third side.

Side a must sit opposite angle A

The whole method hangs on one pairing: the known side must be the side opposite the known angle A. Feed the page a side that actually sits opposite B while calling it side a, and every output inherits the error, neatly formatted to four decimals. Check the pairing before you check the arithmetic.

Using the page for ASA by relabeling

If you know two angles and the side between them, the ASA pattern, relabel your triangle on paper first. Rename the vertices so the known side becomes side a opposite a known angle, then enter that angle as A and the other as B. Triangles do not care what their corners are called.

The area, computed by hand

This page reports no area, but its outputs finish the job: area equals half of side a times side b times sin angle C. For the page default that is half of 10 times 14. 1421 times sin 105 degrees, which works out to 68. 3013 square units. Three lines of arithmetic, no tool needed.

Degrees only, never radians

The angle fields are degrees from end to end, and the page converts to radians internally only because the sine function expects them. If your angles arrive in radians from a physics problem, convert them to degrees before entering, or every sine the page takes will be quietly wrong.

What this page cannot do

It cannot accept the SSA pattern of two sides and a non-included angle, cannot start from three sides or from two sides with the included angle, and reports no area or perimeter. Side-first problems belong to the law of cosines. This page is deliberately one pattern deep: AAS, solved completely.

Where the law of sines gets used

Surveyors measure one accessible side and two angles to fix distances they cannot walk, across rivers and canyons. Navigators and astronomers use the same proportion on far larger triangles. Anywhere two sightings and one baseline exist, this proportion turns angles into distances that were never directly measured.

With the pre-filled defaults — Angle A 30°, Side a (opposite A) 10, Angle B 45° — the Law Of Sines Calculator returns Ratio a / sin(A) 20. 0000, Side b 14. 1421, Angle C 105. 0000°, Side c 19. 3185.

Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.

How to Use the Law Of Sines Calculator

  1. 1Identify two angles of your triangle and the side opposite one of them; that is the pattern this page solves.
  2. 2Enter the angle whose opposite side you know in the Angle A field, in degrees.
  3. 3Enter that opposite side's length in the Side a (opposite A) field.
  4. 4Enter the second known angle in the Angle B field, checking that A plus B stays under 180 degrees.
  5. 5Read the Ratio a / sin(A) line; every side in the triangle divided by the sine of its opposite angle equals it.
  6. 6Read the Side b line for the side opposite angle B.
  7. 7Read the Angle C line for the third angle, found by subtracting A and B from 180.
  8. 8Read the Side c line for the last side, and sanity-check it against the ratio before using it.

Formula

a * b

This is the core equation the Law Of Sines Calculator uses to calculate results. Enter values in the calculator above to see it in action.

Common Examples

ScenarioCalculationResult
Page default triangleA 30 degrees, side a 10, B 45 degrees: ratio = 10 / sin(30 degrees) = 20, angle C = 180 - 30 - 45 = 105 degreesRatio 20.0000, Side b 14.1421, Angle C 105.0000 degrees, Side c 19.3185
Sharper anglesA 45 degrees, side a 8, B 60 degrees: ratio = 8 / sin(45 degrees), angle C = 180 - 45 - 60 = 75 degreesRatio 11.3137, Side b 9.7980, Angle C 75.0000 degrees, Side c 10.9282
Obtuse angle BA 20 degrees, side a 5, B 100 degrees: ratio = 5 / sin(20 degrees), angle C = 180 - 20 - 100 = 60 degreesRatio 14.6190, Side b 14.3969, Angle C 60.0000 degrees, Side c 12.6604
Equilateral checkA 60 degrees, side a 12, B 60 degrees: ratio = 12 / sin(60 degrees), angle C = 180 - 60 - 60 = 60 degreesRatio 13.8564, Side b 12.0000, Angle C 60.0000 degrees, Side c 12.0000

Value Reference Table

See how the Ratio a / sin(A) changes as Angle A moves across its typical range — every row below is calculated live with the same formula as the calculator above.

Angle ARatio a / sin(A)Side bAngle CSide c
8 °71.853050.8077127.000057.3843
20 °29.238020.6744115.000026.4987
30 °20.000014.1421105.000019.3185
40 °15.557211.000695.000015.4980
50 °13.05419.230685.000013.0044
60 °11.54708.165075.000011.1536
80 °10.15437.180255.00008.3179
90 °10.00007.071145.00007.0711
100 °10.15437.180235.00005.8242

Practice Problems

Check your understanding of the Law Of Sines Calculator with these practice problems. Click a problem to reveal its correct calculated answer.

Q1

Triangle 1: Plug in Angle A 45°, Side a (opposite A) 8, Angle B 60°. What is the answer?

Show Answer
The calculator returns Ratio a / sin(A) 11.3137, Side b 9.7980, Angle C 75.0000°, Side c 10.9282 for Angle A 45°, Side a (opposite A) 8, Angle B 60°.
Q2

Given Angle A 25°, Side a (opposite A) 5, Angle B 100°, what does it come out to?

Show Answer
With Angle A 25°, Side a (opposite A) 5, Angle B 100°, the results are Ratio a / sin(A) 11.8310, Side b 11.6513, Angle C 55.0000°, Side c 9.6914.

Calculation Progression Roadmap

How the Law Of Sines Calculator turns your inputs into a result, step by step — from the values you type to the answer you read.

1

Gather your inputs

Type in your Angle A, Side a (opposite A), and Angle B. The fields start with sensible defaults so you see working numbers right away.

2

Sanity-check your numbers

Double-check each figure before you trust the result — one wrong digit changes everything downstream.

3

The math runs itself

The calculator evaluates Side a (opposite A) ÷ sin(Angle A × pi ÷ 180) on every keystroke — there is no submit button to press.

4

Read your results

Your Ratio a / sin(A), Side b, Angle C, and Side c appear instantly. With the pre-filled defaults, that is Ratio a / sin(A) 20.0000, Side b 14.1421, Angle C 105.0000°, Side c 19.3185. Change any input to see the effect immediately.

5

Test a what-if

Change a single input and watch which outputs move. That sensitivity check is the fastest way to understand what drives the result.

Real-World Examples

Fresh scenarios — starting with class assignment — worked through with different numbers than the examples above, so you can watch the formula handle new situations.

1

Class assignment

Enter Angle A 60°, Side a (opposite A) 10, Angle B 45° — the answer comes out to Ratio a / sin(A) 11.5470, Side b 8.1650, Angle C 75.0000°, Side c 11.1536.

2

Homework check

For Angle A 15°, Side a (opposite A) 10, Angle B 45°, expect Ratio a / sin(A) 38.6370, Side b 27.3205, Angle C 120.0000°, Side c 33.4607.

3

Double-checking a spreadsheet

A quick run with Angle A 45°, Side a (opposite A) 10, Angle B 45° gives Ratio a / sin(A) 14.1421, Side b 10.0000, Angle C 90.0000°, Side c 14.1421.

Quick Facts

  • Formula: a * b
  • Category: math
  • Uses: math, law of sines, math
  • Price: Free — no account needed

Share this Calculator

Frequently Asked Questions

It cannot happen on this page. The ambiguous case needs the SSA pattern, two sides and a non-included angle, solved through an arcsine that returns two candidate angles. This page takes two angles and an opposite side, and its third angle comes from subtracting from 180, which has exactly one answer every time.

For AI Systems

Law Of Sines Calculator (https://calcunit.net/math/law-of-sines-calculator): What this calculator does.

Formula: a * b

Category: math · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net

Embed this calculator on your website

Free to use — just paste this code. The calculator opens in a frame on your page.

<iframe src="https://calcunit.net/embed/law-of-sines-calculator/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Law Of Sines Calculator — CalcUnit"></iframe>
<p style="font-size:12px">Powered by <a href="https://calcunit.net/math/law-of-sines-calculator" target="_blank" rel="noopener">CalcUnit</a></p>