Gaussian Calculator
What is the Gaussian Calculator?
What this calculator does
Give it an amplitude, a center, a standard deviation, and an x value, and this page evaluates the Gaussian bell curve at that x. It returns the exponent used, the curve height f(x), the peak height, and the width at half maximum.
It evaluates a curve; it is not a probability tool
Be clear about the scope: this page returns the height of the bell at one point. It does not compute areas, probabilities, or cumulative percentages, and there is no z-table here. The famous 68-95-99. 7 rule describes areas, which this page never gives.
The four inputs it asks for
Amplitude A sets the peak height, Centre (mu) sets where the bell sits, Standard Deviation (sigma) sets how wide it spreads, and x Value is the point to evaluate. The page opens with A of 1, mu of 0, sigma of 1, and x of 1.
Reading the four result lines
The exponent line shows -(x - mu)^2 / (2 sigma^2) to six decimals. Next, f(x) gives the curve height to six decimals. Peak Value restates the top of the bell to four decimals, and Full Width at Half Maximum gives the width there.
The peak line is your amplitude restated
One result surprises people: Peak Value is always exactly the A you entered, because the formula for that line is just the amplitude itself. It is still handy as a yardstick, since every f(x) can be compared against the top of the curve.
Worked example: the page default
With A of 1, mu of 0, sigma of 1, and x of 1, the exponent is -0. 500000 and f(x) is 0. 606531. The peak shows 1. 0000 and the full width at half maximum shows 2. 3548. One sigma out, the curve stands at about 61% of peak.
Worked example: at the peak of a narrow bell
Enter A of 2, mu of 1, sigma of 0. 5, and x of 1. Sitting exactly on the center makes the exponent 0. 000000 and f(x) the full 2. 000000. The peak is 2. 0000 and the width at half maximum is 1. 1774, half the default's width.
Worked example: a wide bell
Enter A of 1, mu of 0, sigma of 2, and x of 2. The exponent is again -0. 500000 and f(x) is 0. 606531, because x is again exactly one sigma from center. The width at half maximum doubles to 4. 7096, matching the doubled sigma.
Worked example: a tall, shifted bell
Enter A of 5, mu of 10, sigma of 3, and x of 16. Now x sits two sigma from center, so the exponent is -2. 000000 and f(x) is 0. 676676. The peak shows 5. 0000 and the width at half maximum shows 7. 0645.
The exponent is half a squared z-score
Divide x's distance from mu by sigma and you get the z-score; the exponent is simply -z^2 / 2. That is why x one sigma out always gives -0. 5 and x two sigma out always gives -2, whatever A, mu, and sigma you chose.
How fast the bell falls
At one sigma from center the height is 60. 65% of the peak. At two sigma it is 13. 53%, and at three sigma barely 1. 11%. The squaring in the exponent is what makes Gaussian tails collapse so much faster than straight-line slopes.
Symmetry does half your work
The curve is a mirror image around mu, so f(mu + d) always equals f(mu - d). With A of 5, mu of 10, and sigma of 3, x of 13 and x of 7 both return 3. 032653. Evaluate one side; the other matches.
Full width at half maximum, explained
Find the two points where the curve drops to half its peak, and measure the distance between them. That width is 2 × sqrt(2 × ln 2) × sigma, about 2. 3548 sigma. Scientists quote it because it can be measured straight off a plotted peak.
A sigma of zero breaks the curve
Sigma is a width, and zero width is a spike, not a bell. Enter sigma of 0 with x away from mu and the exponent dives to negative infinity, so f(x) shows 0. Enter x exactly equal to mu and the exponent is undefined entirely.
Negative sigma fools two of the lines
Because sigma is squared inside the exponent, a negative sigma returns the same exponent and f(x) as its positive twin. But the width line multiplies by sigma directly, so it reports a negative width, which is meaningless. Always enter sigma as a positive number.
Turning it into a real probability density
A true normal distribution needs the total area under the curve to equal 1, which forces A = 1 / (sigma × sqrt(2 pi)). For sigma of 1 that is 0. 3989; for sigma of 2, 0. 1995. This page will not set that amplitude for you.
Probabilities need area, not height
The chance of landing between mu - sigma and mu + sigma is about 68%, but that figure is the area under the curve between those points. A single height from this page cannot give it. You need a cumulative distribution tool or a z-table.
Where Gaussian curves show up
Measurement errors cluster in this shape, as do spectral peaks in chemistry, the blur kernel in image editing, pulses in signal processing, and test-score spreads in education. The full width at half maximum is the standard width quoted for instrument and telescope peaks.
Height is not area
A tall narrow bell and a short wide bell can enclose exactly the same total area. Amplitude alone tells you nothing about how much lies under the curve, which is why this page's peak line should never be read as a probability or a share.
Worked check: three sigma out
Keep the default bell, A of 1, mu of 0, sigma of 1, and move x to 3. The exponent becomes -4. 500000 and f(x) falls to 0. 011109, barely one percent of the peak. Runs like this are the fastest way to feel how violently the squared exponent bites.
Sigma is not the width you see
A sketched bell looks roughly four sigma across at its base, yet sigma itself is measured from the center to the curve's bend points. The half width at half maximum, from center to the half-height point on one side, is 1. 1774 sigma, narrower than most people guess.
A negative amplitude flips the bell
Nothing in the formulas stops A from being negative, and the page will happily return a negative peak and negative f(x) values. That draws a dip instead of a bell, useful in signal work for absorption troughs, but it is no longer a probability shape in any sense.
What this page cannot do
It cannot total the area under the curve, give a probability or percentile, solve backward from a height to an x, or handle several bells at once. It evaluates one point on one curve, cleanly and quickly, and leaves the statistics to statistics tools.
With the pre-filled defaults — Amplitude A 1, Centre (mu) 0, Standard Deviation (sigma) 1, x Value 1 — the Gaussian Calculator returns Exponent -(x - mu)^2 / (2 sigma^2) -0. 500000, f(x) 0. 606531, Peak Value 1. 0000, Full Width at Half Maximum 2. 3548.
Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.
How to Use the Gaussian Calculator
- 1Enter the peak height of your bell in the Amplitude A field.
- 2Enter the center of the bell in the Centre (mu) field.
- 3Enter the spread in the Standard Deviation (sigma) field, keeping it positive.
- 4Enter the point you want to evaluate in the x Value field.
- 5Read the Exponent -(x - mu)^2 / (2 sigma^2) line to see how far out x sits, in squared z-score terms.
- 6Read the f(x) line: the height of the curve at your x.
- 7Compare f(x) with the Peak Value line to see what fraction of the top your point reaches.
- 8Read the Full Width at Half Maximum line for the bell's width measured at half its peak height.
Formula
This is the core equation the Gaussian Calculator uses to calculate results. Enter values in the calculator above to see it in action.
Common Examples
| Scenario | Calculation | Result |
|---|---|---|
| Page default bell | A = 1, mu = 0, sigma = 1, x = 1: exponent = -(1)^2 / (2 × 1) = -0.500000, f(x) = 1 × exp(-0.5) | Exponent -0.500000, f(x) 0.606531, Peak Value 1.0000, Full Width at Half Maximum 2.3548 |
| Peak of a narrow bell | A = 2, mu = 1, sigma = 0.5, x = 1: exponent = 0 / (2 × 0.25) = 0.000000, f(x) = 2 × exp(0) | Exponent 0.000000, f(x) 2.000000, Peak Value 2.0000, Full Width at Half Maximum 1.1774 |
| Wide bell at x = 2 | A = 1, mu = 0, sigma = 2, x = 2: exponent = -(2)^2 / (2 × 4) = -0.500000, f(x) = 1 × exp(-0.5) | Exponent -0.500000, f(x) 0.606531, Peak Value 1.0000, Full Width at Half Maximum 4.7096 |
| Tall shifted bell, two sigma out | A = 5, mu = 10, sigma = 3, x = 16: exponent = -(6)^2 / (2 × 9) = -2.000000, f(x) = 5 × exp(-2) | Exponent -2.000000, f(x) 0.676676, Peak Value 5.0000, Full Width at Half Maximum 7.0645 |
Value Reference Table
See how the Exponent -(x - mu)^2 / (2 sigma^2) changes as Amplitude A moves across its typical range — every row below is calculated live with the same formula as the calculator above.
| Amplitude A | Exponent -(x - mu)^2 / (2 sigma^2) | f(x) | Peak Value | Full Width at Half Maximum |
|---|---|---|---|---|
| 0.3 | -0.500000 | 0.181959 | 0.3000 | 2.3548 |
| 0.5 | -0.500000 | 0.303265 | 0.5000 | 2.3548 |
| 0.8 | -0.500000 | 0.485225 | 0.8000 | 2.3548 |
| 1 | -0.500000 | 0.606531 | 1.0000 | 2.3548 |
| 2 | -0.500000 | 1.213061 | 2.0000 | 2.3548 |
| 3 | -0.500000 | 1.819592 | 3.0000 | 2.3548 |
| 4 | -0.500000 | 2.426123 | 4.0000 | 2.3548 |
Practice Problems
Check your understanding of the Gaussian Calculator with these practice problems. Click a problem to reveal its correct calculated answer.
Peak of a narrow bell (A = 2, mu = 1, sigma = 0.5, x = 1): Given Amplitude A 2, Centre (mu) 1, Standard Deviation (sigma) 0.5, x Value 1, what does it come out to?
Show AnswerHide Answer
You enter Amplitude A 1.25, Centre (mu) 0, Standard Deviation (sigma) 2, x Value 2 — what does the calculator return?
Show AnswerHide Answer
Calculation Progression Roadmap
How the Gaussian Calculator turns your inputs into a result, step by step — from the values you type to the answer you read.
Gather your inputs
Type in your Amplitude A, Centre (mu), Standard Deviation (sigma), and x Value. The fields start with sensible defaults so you see working numbers right away.
Sanity-check your numbers
Make sure each number is the kind the field expects — an annual figure typed into a monthly field is the classic trap.
The math runs itself
The calculator evaluates -((x Value - Centre (mu))^2) ÷ (2 × Standard Deviation (sigma)^2) on every keystroke — there is no submit button to press.
Read your results
Your Exponent -(x - mu)^2 / (2 sigma^2), f(x), Peak Value, and Full Width at Half Maximum appear instantly. With the pre-filled defaults, that is Exponent -(x - mu)^2 / (2 sigma^2) -0.500000, f(x) 0.606531, Peak Value 1.0000, Full Width at Half Maximum 2.3548. Change any input to see the effect immediately.
Test a what-if
Nudge one input up or down. Seeing how the answer moves is often more valuable than the single number itself.
Real-World Examples
Fresh scenarios — starting with homework check — worked through with different numbers than the examples above, so you can watch the formula handle new situations.
Homework check
For Amplitude A 2, Centre (mu) 0, Standard Deviation (sigma) 1, x Value 1, expect Exponent -(x - mu)^2 / (2 sigma^2) -0.500000, f(x) 1.213061, Peak Value 2.0000, Full Width at Half Maximum 2.3548.
Double-checking a spreadsheet
A quick run with Amplitude A 0.5, Centre (mu) 0, Standard Deviation (sigma) 1, x Value 1 gives Exponent -(x - mu)^2 / (2 sigma^2) -0.500000, f(x) 0.303265, Peak Value 0.5000, Full Width at Half Maximum 2.3548.
Settling a debate
With Amplitude A 1.5, Centre (mu) 0, Standard Deviation (sigma) 1, x Value 1, the calculator returns Exponent -(x - mu)^2 / (2 sigma^2) -0.500000, f(x) 0.909796, Peak Value 1.5000, Full Width at Half Maximum 2.3548.
Quick Facts
- Formula:
a * b - Category: math
- Uses: math, gaussian, math
- Price: Free — no account needed
Frequently Asked Questions
No. It returns the height of the bell curve at one x value, not the probability of landing anywhere. Probabilities are areas under the curve and need the cumulative distribution function. This page has no area, percentile, or z-table output, so use a normal distribution calculator for those questions.
For AI Systems
Gaussian Calculator (https://calcunit.net/math/gaussian-calculator): What this calculator does.
Formula: a * b
Category: math · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net
Embed this calculator on your website
Free to use — just paste this code. The calculator opens in a frame on your page.
<iframe src="https://calcunit.net/embed/gaussian-calculator/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Gaussian Calculator — CalcUnit"></iframe> <p style="font-size:12px">Powered by <a href="https://calcunit.net/math/gaussian-calculator" target="_blank" rel="noopener">CalcUnit</a></p>
