Cosine Calculator
What is the Cosine Calculator?
What this calculator does
Enter one angle in degrees, and this page returns the angle in radians along with its cosine, sine, and tangent. Despite the name, you get all three main trig ratios from a single entry, each shown to four decimal places. One angle per run, no triangle required.
The one input it asks for
The Angle field takes degrees, plain decimal degrees, and the page opens with 60 already filled in. There are no degrees-minutes-seconds boxes and no side lengths. Everything on the results side is computed from that single number, converted to radians behind the scenes.
The radians line
The Angle (radians) line shows your angle multiplied by pi over 180: 60 degrees becomes 1. 0472 radians. Radians are the unit trig functions natively use, the measure where an angle is just arc length on a unit circle. The conversion happens for you; you never type a radian value.
Degrees are the working unit here
School courses, job sites, and navigation all speak degrees, so the page takes degrees and handles the radian conversion itself. Radians rule in calculus because derivative formulas stay clean there. Whichever world your problem lives in, enter degrees here and read radians off the second line.
Reading cos and sin as coordinates
On a unit circle, cos(θ) is the x coordinate and sin(θ) is the y coordinate of the point at your angle. That is why both stay between -1 and 1, why cos falls as the angle sweeps past 90 degrees, and why sin peaks exactly at 90.
Reading the tan line
The tan(θ) line is sin divided by cos, the slope of the line at your angle. Unlike its two partners it is unbounded: it sits at 1. 0000 for 45 degrees, passes 1. 7321 at 60, and rockets upward as the angle nears 90, where the slope turns vertical.
Zero and 180 degrees anchor the scale
At 0 degrees the page shows radians 0. 0000, cos(θ) 1. 0000, sin(θ) 0. 0000, and tan(θ) 0. 0000: the point sits at (1, 0). At 180 degrees it shows radians 3. 1416, cos(θ) -1. 0000, and sin(θ) 0. 0000, the point at (-1, 0) on the other side.
Worked example: the page default
At 60 degrees the page shows radians 1. 0472, cos(θ) 0. 5000, sin(θ) 0. 8660, and tan(θ) 1. 7321. These are the classic exact values of the 30-60-90 triangle in decimal dress: cosine one half, sine root 3 over 2, tangent root 3.
Worked example: half of a right angle
At 45 degrees the page shows radians 0. 7854, cos(θ) 0. 7071, sin(θ) 0. 7071, and tan(θ) 1. 0000. Cosine and sine always meet at 45 degrees, where the unit-circle point sits on the diagonal, and a tangent of exactly 1 is the signature of that balance.
Worked example: an obtuse angle
At 120 degrees the page shows radians 2. 0944, cos(θ) -0. 5000, sin(θ) 0. 8660, and tan(θ) -1. 7321. Past 90 degrees the circle point moves left of center, so cosine turns negative while sine stays positive; tangent, their ratio, follows cosine's sign.
Worked example: a gentle slope angle
At 30 degrees the page shows radians 0. 5236, cos(θ) 0. 8660, sin(θ) 0. 5000, and tan(θ) 0. 5774. Note the swap against the 60-degree default: sine and cosine trade values, because 30 and 60 are complementary angles that complete the same right triangle from opposite corners.
The 90-degree tangent trap
At exactly 90 degrees the cos(θ) line reads 0. 0000 and the tan(θ) line prints an enormous number, 16331239353195370, rather than an error. The truth: tangent at 90 degrees is undefined, and that giant figure is a floating-point artifact of the radian value landing a hair off pi over 2.
The 270-degree case repeats the trick
At 270 degrees the radians line shows 4. 7124, cos(θ) reads 0. 0000, and sin(θ) reads -1. 0000, the bottom of the circle. The tan(θ) line again explodes into an enormous figure in the quadrillions, the same floating-point artifact as at 90 degrees: tangent is undefined at both.
Negative angles work too
At -30 degrees the page shows radians -0. 5236, cos(θ) 0. 8660, sin(θ) -0. 5000, and tan(θ) -0. 5774. A negative angle sweeps clockwise below the axis: cosine, the x coordinate, is unchanged, while sine and tangent flip sign. The page handles the full circle, not just the first quadrant.
Angles past 360 degrees
Enter 405 and the trig lines repeat the 45-degree values, 0. 7071, 0. 7071, and 1. 0000, because 405 degrees is one full turn plus 45. Only the radians line keeps growing, showing 7. 0686. The ratios care where the angle points, not how many turns it took to get there.
The identity check
Cosine squared plus sine squared always equals 1, because the unit-circle point sits on the circle. The default confirms it: 0. 5000 squared plus 0. 8660 squared is 0. 25 plus 0. 75, which is 1. If your two lines fail that test, one of them was copied down wrong.
Where these ratios earn their keep
Roof pitch and ramp grades are tangent questions, shadow lengths are sine and cosine questions, and alternating current follows a cosine curve through every cycle. Resolving a force or a velocity into horizontal and vertical parts is exactly reading cos and sin off an angle, as this page does.
Common mistake: typing radians into a degrees field
The Angle field expects degrees. If you type 1. 0472, the radian measure of 60 degrees, the page treats it as 1. 0472 degrees and shows cos(θ) of 0. 9998. To use a radian value here, multiply it by 180 over pi first to get degrees, then enter that.
Common mistake: hunting for the angle itself
This page runs one direction only, from angle to ratios. There is no inverse line, no arccos, arcsin, or arctan output. If you know a ratio and need its angle, that is an inverse-trig job for a different tool, not a mode hidden somewhere on this page.
The three missing ratios
Secant, cosecant, and cotangent are not shown, but each is a reciprocal away: secant is 1 over cos, cosecant is 1 over sin, cotangent is 1 over tan. At 60 degrees that gives secant 2. 0000, cosecant 1. 1547, and cotangent 0. 5774, all from the lines already on screen.
Four decimal places in practice
Every line stops at four decimals, so sin 60 shows as 0. 8660 while the exact value, root 3 over 2, runs to 0. 866025 and beyond. Four places are plenty for grades, cuts, and settings. Just avoid feeding the rounded values into long chains of further calculation where the last digit matters.
What this page cannot do
It does not solve triangles, so there are no side or hypotenuse fields, and it does not accept radians, grads, or degrees with minutes and seconds. It reports four rounded decimals of each ratio, which is plenty for classwork and field work but not a substitute for exact symbolic values.
With the pre-filled defaults — Angle 60° — the Cosine Calculator returns Angle (radians) 1. 0472, cos(θ) 0. 5000, sin(θ) 0. 8660, tan(θ) 1. 7321. Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.
How to Use the Cosine Calculator
- 1Measure or decide the angle you need ratios for, expressed in decimal degrees.
- 2Enter that angle in the Angle field, replacing the 60-degree starting value.
- 3Read the Angle (radians) line if you also need the angle in radian measure for a formula.
- 4Read the cos(θ) line: it is the horizontal coordinate of your angle on the unit circle.
- 5Read the sin(θ) line: it is the vertical coordinate, and the rise behind slope-style problems.
- 6Read the tan(θ) line for the ratio of sine to cosine, but treat the value with suspicion near 90 degrees.
- 7Sanity-check the pair: square the cos(θ) and sin(θ) lines and add them; the total should be 1.
- 8If you need secant, cosecant, or cotangent, take 1 divided by the matching line and finish by hand.
Formula
This is the core equation the Cosine Calculator uses to calculate results. Enter values in the calculator above to see it in action.
Common Examples
| Scenario | Calculation | Result |
|---|---|---|
| Page default angle | Angle 60 degrees: radians 60 * pi / 180, then cos, sin, and tan of that radian value | Angle (radians) 1.0472, cos(θ) 0.5000, sin(θ) 0.8660, tan(θ) 1.7321 |
| Half of a right angle | Angle 45 degrees: radians 45 * pi / 180, then cos, sin, and tan of that radian value | Angle (radians) 0.7854, cos(θ) 0.7071, sin(θ) 0.7071, tan(θ) 1.0000 |
| Obtuse angle | Angle 120 degrees: radians 120 * pi / 180, then cos, sin, and tan of that radian value | Angle (radians) 2.0944, cos(θ) -0.5000, sin(θ) 0.8660, tan(θ) -1.7321 |
| Gentle slope angle | Angle 30 degrees: radians 30 * pi / 180, then cos, sin, and tan of that radian value | Angle (radians) 0.5236, cos(θ) 0.8660, sin(θ) 0.5000, tan(θ) 0.5774 |
Value Reference Table
See how the Angle (radians) changes as Angle moves across its typical range — every row below is calculated live with the same formula as the calculator above.
| Angle | Angle (radians) | cos(θ) | sin(θ) | tan(θ) |
|---|---|---|---|---|
| 20 ° | 0.3491 | 0.9397 | 0.3420 | 0.3640 |
| 30 ° | 0.5236 | 0.8660 | 0.5000 | 0.5774 |
| 50 ° | 0.8727 | 0.6428 | 0.7660 | 1.1918 |
| 60 ° | 1.0472 | 0.5000 | 0.8660 | 1.7321 |
| 80 ° | 1.3963 | 0.1736 | 0.9848 | 5.6713 |
| 90 ° | 1.5708 | 0.0000 | 1.0000 | 16331239353195370.0000 |
| 100 ° | 1.7453 | -0.1736 | 0.9848 | -5.6713 |
| 200 ° | 3.4907 | -0.9397 | -0.3420 | 0.3640 |
Practice Problems
Check your understanding of the Cosine Calculator with these practice problems. Click a problem to reveal its correct calculated answer.
Zero angle: Plug in Angle 0°. What is the answer?
Show AnswerHide Answer
Given Angle 150°, what does it come out to?
Show AnswerHide Answer
Calculation Progression Roadmap
How the Cosine Calculator turns your inputs into a result, step by step — from the values you type to the answer you read.
Gather your inputs
Type in your Angle. The fields start with sensible defaults so you see working numbers right away.
Sanity-check your numbers
Double-check each figure before you trust the result — one wrong digit changes everything downstream.
The math runs itself
The calculator evaluates Angle × pi ÷ 180 on every keystroke — there is no submit button to press.
Read your results
Your Angle (radians), cos(θ), sin(θ), and tan(θ) appear instantly. With the pre-filled defaults, that is Angle (radians) 1.0472, cos(θ) 0.5000, sin(θ) 0.8660, tan(θ) 1.7321. Change any input to see the effect immediately.
Test a what-if
Change a single input and watch which outputs move. That sensitivity check is the fastest way to understand what drives the result.
Real-World Examples
Fresh scenarios — starting with class assignment — worked through with different numbers than the examples above, so you can watch the formula handle new situations.
Class assignment
Enter Angle 120° — the answer comes out to Angle (radians) 2.0944, cos(θ) -0.5000, sin(θ) 0.8660, tan(θ) -1.7321.
Homework check
For Angle 30°, expect Angle (radians) 0.5236, cos(θ) 0.8660, sin(θ) 0.5000, tan(θ) 0.5774.
Double-checking a spreadsheet
A quick run with Angle 90° gives Angle (radians) 1.5708, cos(θ) 0.0000, sin(θ) 1.0000, tan(θ) 16,331,239,353,195,370.0000.
Quick Facts
- Formula:
a * b - Category: math
- Uses: math, cosine, math
- Price: Free — no account needed
Frequently Asked Questions
Because the three ratios come from the same unit-circle point and are usually needed together. Cosine is the point's x coordinate, sine its y coordinate, and tangent their ratio. The page evaluates all three from your one angle, plus the angle in radians, each to four decimal places.
For AI Systems
Cosine Calculator (https://calcunit.net/math/cosine-calculator): What this calculator does.
Formula: a * b
Category: math · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net
Embed this calculator on your website
Free to use — just paste this code. The calculator opens in a frame on your page.
<iframe src="https://calcunit.net/embed/cosine-calculator/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Cosine Calculator — CalcUnit"></iframe> <p style="font-size:12px">Powered by <a href="https://calcunit.net/math/cosine-calculator" target="_blank" rel="noopener">CalcUnit</a></p>
