CalcUnit Logo

Conic Section Calculator

What is the Conic Section Calculator?

What this calculator does

Give it the two semi-axes of an ellipse, and this page returns the ellipse's area, its eccentricity, the focal distance from center to each focus, and an approximate perimeter. You supply the semi-major axis a and the semi-minor axis b, and it does the rest.

One conic only: the ellipse

Be clear about the scope: despite the broad name, this page handles exactly one conic section, the ellipse. There are no fields for a parabola or a hyperbola, no center coordinates, and no way to paste in a general equation and have it classified for you.

The two inputs it asks for

Semi-Major Axis a is the longer half-axis, the distance from the center to the far end of the ellipse. Semi-Minor Axis b is the shorter half-axis. The page opens with a of 5 and b of 3 filled in as a starting example.

Semi-axes are halves, not full widths

Each field takes the distance from the center to the edge, which is half the full axis. An oval that measures 20 across and 12 tall takes a of 10 and b of 6, not 20 and 12. Entering full widths inflates every result, and the area most of all.

Reading the four result lines

Ellipse Area reports the surface inside the curve in square units. Eccentricity describes the shape's flatness on a scale from 0 to 1. Focal Distance c locates the two foci. Perimeter (Ramanujan Approximation) estimates the distance around the curve. All four show four decimal places.

The area line

Area follows the circle formula stretched into an oval: pi times a times b. For the default axes that is pi times 15, or 47. 1239 square units. If a and b were equal, the same formula would collapse to the familiar pi r squared of a circle.

The eccentricity line

Eccentricity measures how far the ellipse strays from a circle. It is 0 for a perfect circle and climbs toward 1 as the oval flattens toward a line segment. Earth's orbit has an eccentricity near 0. 0167, so it is nearly circular; the default ellipse, at 0. 8000, is visibly squashed.

The focal distance line

The two foci sit inside the ellipse on its major axis, each c units from the center, where c is the square root of a squared minus b squared. Stretch a string of length 2a between the two foci and a pencil tracing the curve keeps that string taut: the ellipse is exactly that traced path.

The perimeter line is an approximation

No exact formula using ordinary functions gives an ellipse's perimeter, so the page uses Ramanujan's well-known approximation. It is essentially exact for gentle ovals: at a of 5 and b of 3 it prints 25. 5270, matching the true perimeter to four decimal places.

How far off can the perimeter be

The approximation drifts slightly low as an ellipse gets very flat. At a of 10 and b of 1 the page prints 40. 6055, while the true perimeter is 40. 6397, a gap of about 0. 08 percent. For everyday shapes the error is far smaller than any measuring tape you own.

Worked example: the page default

With a of 5 and b of 3: Ellipse Area is 47. 1239, Eccentricity is 0. 8000, Focal Distance is 4. 0000, and the perimeter estimate is 25. 5270. The foci sit 4 units either side of the center, and the eccentricity of 0. 8 marks a clearly oval shape.

Worked example: an oval track

Enter a of 10 and b of 6, an oval 20 long and 12 wide. The area doubles in each direction to 188. 4956, the focal distance is 8. 0000, and the perimeter estimate is 51. 0540. Eccentricity stays 0. 8000, because this ellipse is the default shape scaled up, not a new shape.

Worked example: a circle in disguise

Enter a of 4 and b of 4. The results are an area of 50. 2655, eccentricity 0. 0000, focal distance 0. 0000, and a perimeter of 25. 1327. Equal semi-axes make a circle, both foci merge at the center, and the perimeter line returns exactly 2 pi times 4, the circle circumference.

Worked example: a very flat ellipse

Enter a of 10 and b of 1. The area is 31. 4159, eccentricity climbs to 0. 9950, and the focal distance is 9. 9499, putting each focus close to its end of the axis. The perimeter estimate is 40. 6055. This is the shape of a flat orbit or a lens outline.

The swapped-axes trap

The formulas assume a is the larger axis. Enter a of 3 and b of 5 and the area and perimeter still come out right, at 47. 1239 and 25. 5270, but Eccentricity and Focal Distance silently clamp to 0. 0000. If you see zeros there, swap the fields so the larger value sits in a.

Where ellipses show up in real life

Planets orbit in ellipses with the Sun at one focus, which is Kepler's first law. Whispering galleries use the focal property to carry a whisper across a room, and oval running tracks, garden beds, and tabletops all need the area and perimeter this page reports.

Reading an ellipse equation by hand

An ellipse written as x squared over 25 plus y squared over 9 equals 1 has semi-axes of 5 and 3, the square roots of the two denominators. Those are exactly the default entries here, so any textbook equation of that form can be measured by reading off a and b this way.

Units follow your axes

The page asks for no unit. Measure the axes in feet and the area is square feet and the perimeter is feet; measure in meters and the answers follow in meters. Eccentricity and the shape it describes carry no unit at all, since eccentricity is a pure ratio.

Common mistake: expecting the foci as coordinates

The page reports only the distance c, not plotted points. To place the foci, start at your ellipse's center and move c units along the major axis in each direction. If your center is the origin and the major axis is horizontal, the foci are simply (c, 0) and (-c, 0).

A quick check of any answer

The true area must sit between the areas of the two circles built on b and on a. For the default that is pi times 9, or 28. 2743, and pi times 25, or 78. 5398, and 47. 1239 sits between them. A result outside that bracket means an entry is wrong.

What this page cannot do

It assumes an axis-aligned ellipse centered wherever you imagine it; there is no tilt angle, no rotation, and no center point. It does not handle parabolas or hyperbolas, does not solve for a missing axis from an area, and does not evaluate the curve point by point.

With the pre-filled defaults — Semi-Major Axis a 5, Semi-Minor Axis b 3 — the Conic Section Calculator returns Ellipse Area (πab) 47. 1239, Eccentricity 0. 8000, Focal Distance c 4. 0000, Perimeter (Ramanujan Approximation) 25. 5270. Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.

How to Use the Conic Section Calculator

  1. 1Measure or look up the longer half-axis of your ellipse, the distance from its center to the far end.
  2. 2Enter that length in the Semi-Major Axis a field.
  3. 3Measure the shorter half-axis, from the center to the near edge of the curve.
  4. 4Enter that length in the Semi-Minor Axis b field, keeping it no larger than a.
  5. 5Read the Ellipse Area line for the surface enclosed by the curve, in square units of your measurement.
  6. 6Read the Eccentricity line: near 0 means nearly circular, near 1 means strongly flattened.
  7. 7Read the Focal Distance c line to place each focus that far from the center along the major axis.
  8. 8Read the Perimeter (Ramanujan Approximation) line for the distance around the curve, remembering it is an excellent estimate rather than an exact value.

Formula

a * b

This is the core equation the Conic Section Calculator uses to calculate results. Enter values in the calculator above to see it in action.

Common Examples

ScenarioCalculationResult
Page default ellipsea = 5, b = 3: Area pi * 5 * 3, c = sqrt(25 - 9) = 4, e = 4 / 5, Perimeter pi * (24 - sqrt(18 * 14))Ellipse Area 47.1239, Eccentricity 0.8000, Focal Distance 4.0000, Perimeter 25.5270
Oval tracka = 10, b = 6: Area pi * 10 * 6, c = sqrt(100 - 36) = 8, e = 8 / 10, Perimeter pi * (48 - sqrt(36 * 28))Ellipse Area 188.4956, Eccentricity 0.8000, Focal Distance 8.0000, Perimeter 51.0540
Circle (a = b)a = 4, b = 4: Area pi * 4 * 4, c = sqrt(16 - 16) = 0, e = 0 / 4, Perimeter pi * (24 - sqrt(16 * 16))Ellipse Area 50.2655, Eccentricity 0.0000, Focal Distance 0.0000, Perimeter 25.1327
Very flat ellipsea = 10, b = 1: Area pi * 10 * 1, c = sqrt(100 - 1), e = c / 10, Perimeter pi * (33 - sqrt(31 * 13))Ellipse Area 31.4159, Eccentricity 0.9950, Focal Distance 9.9499, Perimeter 40.6055

Value Reference Table

See how the Ellipse Area (πab) changes as Semi-Major Axis a moves across its typical range — every row below is calculated live with the same formula as the calculator above.

Semi-Major Axis aEllipse Area (πab)EccentricityFocal Distance cPerimeter (Ramanujan Approximation)
19.42480.00000.000013.3644
328.27430.00000.000018.8496
437.69910.66142.645822.1035
547.12390.80004.000025.5270
656.54870.86605.196229.0653
875.39820.92707.416236.3662
1094.24780.95399.539443.8567
20188.49560.988719.773782.4875

Practice Problems

Check your understanding of the Conic Section Calculator with these practice problems. Click a problem to reveal its correct calculated answer.

Q1

Oval track: With Semi-Major Axis a 10, Semi-Minor Axis b 6, what are the results?

Show Answer
Entering Semi-Major Axis a 10, Semi-Minor Axis b 6 gives Ellipse Area (πab) 188.4956, Eccentricity 0.8000, Focal Distance c 8.0000, Perimeter (Ramanujan Approximation) 51.0540.
Q2

Semi-Major Axis a 5, Semi-Minor Axis b 4 — work it out, then check the answer.

Show Answer
The calculator returns Ellipse Area (πab) 62.8319, Eccentricity 0.6000, Focal Distance c 3.0000, Perimeter (Ramanujan Approximation) 28.3617 for Semi-Major Axis a 5, Semi-Minor Axis b 4.

Calculation Progression Roadmap

How the Conic Section Calculator turns your inputs into a result, step by step — from the values you type to the answer you read.

1

Gather your inputs

Type in your Semi-Major Axis a and Semi-Minor Axis b. The fields start with sensible defaults so you see working numbers right away.

2

Sanity-check your numbers

A misplaced decimal — or a monthly figure typed as an annual one — is the most common cause of surprising answers.

3

The math runs itself

The calculator evaluates pi × Semi-Major Axis a × Semi-Minor Axis b on every keystroke — there is no submit button to press.

4

Read your results

Your Ellipse Area (πab), Eccentricity, Focal Distance c, and Perimeter (Ramanujan Approximation) appear instantly. With the pre-filled defaults, that is Ellipse Area (πab) 47.1239, Eccentricity 0.8000, Focal Distance c 4.0000, Perimeter (Ramanujan Approximation) 25.5270. Change any input to see the effect immediately.

5

Test a what-if

Try a bigger and a smaller value for one input. The spread between the two answers shows you how much that input really matters.

Real-World Examples

Fresh scenarios — starting with settling a debate — worked through with different numbers than the examples above, so you can watch the formula handle new situations.

1

Settling a debate

With Semi-Major Axis a 10, Semi-Minor Axis b 3, the calculator returns Ellipse Area (πab) 94.2478, Eccentricity 0.9539, Focal Distance c 9.5394, Perimeter (Ramanujan Approximation) 43.8567.

2

Quick mental-math verify

Plug in Semi-Major Axis a 2.5, Semi-Minor Axis b 3 and you get Ellipse Area (πab) 23.5619, Eccentricity 0.0000, Focal Distance c 0.0000, Perimeter (Ramanujan Approximation) 17.3145.

3

Class assignment

Enter Semi-Major Axis a 7.5, Semi-Minor Axis b 3 — the answer comes out to Ellipse Area (πab) 70.6858, Eccentricity 0.9165, Focal Distance c 6.8739, Perimeter (Ramanujan Approximation) 34.5192.

Quick Facts

  • Formula: a * b
  • Category: math
  • Uses: math, conic section, math
  • Price: Free — no account needed

Share this Calculator

Frequently Asked Questions

Only the ellipse. You enter its two semi-axes and receive area, eccentricity, focal distance, and an approximate perimeter. There are no modes for a parabola or a hyperbola, and no way to enter a general second-degree equation and have the page identify which conic it describes.

For AI Systems

Conic Section Calculator (https://calcunit.net/math/conic-section-calculator): What this calculator does.

Formula: a * b

Category: math · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net

Embed this calculator on your website

Free to use — just paste this code. The calculator opens in a frame on your page.

<iframe src="https://calcunit.net/embed/conic-section-calculator/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Conic Section Calculator — CalcUnit"></iframe>
<p style="font-size:12px">Powered by <a href="https://calcunit.net/math/conic-section-calculator" target="_blank" rel="noopener">CalcUnit</a></p>