Cartesian Polar Calculator
What is the Cartesian Polar Calculator?
What this calculator does
Type a point's x Coordinate and y Coordinate, the grid description, and this page converts them into polar form: Radius (r), the straight-line distance from the origin, plus the angle in both radians and degrees. The conversion runs one way, Cartesian to polar.
Two ways to name a point
Cartesian coordinates give directions like a city grid: walk x blocks across, then y blocks up. Polar coordinates give a compass-style fix instead: face the angle theta, then walk r steps. Both name the same point; each suits different problems.
The two inputs it asks for
The x Coordinate measures horizontal displacement from the origin and opens at 3. The y Coordinate measures vertical displacement and opens at 4. Either value may be negative, which simply places the point left of, or below, the origin.
Reading the three result lines
Radius (r) is the distance from the origin and is never negative here. Angle (radians) gives the direction in radians, and Angle (degrees) repeats it in degrees, both to four decimal places. The two angle lines are one direction in two units.
Worked example: the page default
With x Coordinate 3 and y Coordinate 4, the Radius reads 5. 0000, the famous 3-4-5 triangle. The Angle (radians) reads 0. 9273 and the Angle (degrees) reads 53. 1301 degrees: the point sits five units away, aimed up and to the right.
Worked example: the second quadrant
Enter −5 and 5. The Radius is 7. 0711 and the Angle (degrees) is 135. 0000 degrees, pointing up and to the left at an exact diagonal. The Angle (radians) line reads 2. 3562. Notice the calculator kept the angle in the correct quadrant automatically.
Worked example: straight down the y axis
Enter 0 and −2. The Radius is 2. 0000 and the Angle (degrees) reads −90. 0000 degrees, straight down, with Angle (radians) at −1. 5708. A point on an axis takes the axis's own angle, and below the x axis that angle is negative.
Worked example: the third quadrant
Enter −3 and −4. The Radius is again 5. 0000, but the Angle (degrees) reads −126. 8699 degrees and Angle (radians) −2. 2143. The point is the mirror of the page default through the origin, and the angle says so: down and to the left.
Worked example: a 5-12-13 triangle
Enter 5 and 12. The Radius reads 13. 0000, completing the 5-12-13 right triangle, and the Angle (degrees) reads 67. 3801 degrees with Angle (radians) at 1. 1760. Steep points like this one sit closer to the y axis than to the x axis.
Where the radius formula comes from
The x and y displacements form the legs of a right triangle whose hypotenuse is the straight line from the origin to the point. Pythagoras gives r, the square root of x squared plus y squared. That is why 3 and 4 produce exactly 5.
Why the angle uses atan2, not arctan
Plain arctan of y over x cannot tell (−5, 5) from (5, −5), because both ratios are −1 and arctan answers −45 degrees for each. The two-argument atan2 sees the signs separately and returns 135 degrees for the first point. Quadrants stay honest.
Why angles can come out negative
The page reports angles between −180 and 180 degrees. Points above the x axis get positive angles; points below it get negative ones, measured clockwise. So (0, −2) is −90 degrees rather than 270. Both describe the same direction; only the convention differs.
If your class wants 0 to 360 instead
Add 360 to any negative degree reading. The third-quadrant point above, at −126. 8699 degrees, becomes 233. 1301 degrees, and the straight-down point becomes 270 degrees. Radians work the same way with 2 pi: add about 6. 2832 to a negative radian reading.
Radians or degrees: which to report
Use degrees for navigation, bearings, surveying, and most school geometry, where 90 degrees is a friendlier right angle than 1. 5708 radians. Use radians for calculus, physics, and programming, where formulas for arc length and rotation assume them. This page removes the conversion step entirely.
Going back: polar to Cartesian by hand
This page does not convert in reverse, but the formulas are short: x = r cos theta and y = r sin theta. Check the default: 5 times cos of 53. 1301 degrees is 3. 0000, and 5 times sin is 4. 0000, recovering the inputs exactly.
Where polar coordinates earn their keep
Radar and sonar naturally report a blip as range and bearing, which is polar form already. Circles and spirals, painful in grid coordinates, become one-line equations in polar form, and engineers describe alternating-current phasors as a length at an angle.
Bearings are a cousin, not a twin
A compass bearing is measured clockwise from north, while this page measures counterclockwise from the positive x axis, the mathematics convention. A bearing of 53. 1301 degrees and a polar angle of 53. 1301 degrees point in genuinely different directions. Convert before you navigate.
Angles bigger than a full turn
Nothing stops a rotation from exceeding 360 degrees, but a point cannot show it: spin twice and land on the default point and this page still reports 53. 1301 degrees. Polar form records where a point is, not how many turns it took getting there.
Common mistake: swapping x and y
Enter 4 and 3 instead of 3 and 4 and the Radius still reads 5. 0000, hiding the error, but the Angle (degrees) drops to 36. 8699 degrees. The angle is measured from the x axis toward y, so the order of the two fields matters.
Common mistake: feeding an angle into the wrong unit later
A direction copied from the Angle (degrees) line into a formula expecting radians, common in code and spreadsheets, throws every later step off. Match the unit to the tool: this page's two angle lines exist precisely so you can pick the right one.
The origin is a special case
At (0, 0) the Radius is 0 and the point has no direction at all; the page reports an angle of 0 by convention. Treat any angle shown for the exact origin as a placeholder, not a measurement. A zero-length arrow points nowhere.
What this calculator leaves out
There is no reverse polar-to-Cartesian mode, no third coordinate for cylindrical or spherical systems, and no negative-radius convention like some textbooks allow. It converts one flat point per run, in one direction, and leaves graphing and rotation entirely to you.
A thirty-second check of any answer
Square the Radius and compare it with x squared plus y squared: 25 must equal 9 plus 16 for the default point. Then glance at the quadrant: the signs of x and y dictate which quarter of the circle the degree reading must fall in.
With the pre-filled defaults — x Coordinate 3, y Coordinate 4 — the Cartesian Polar Calculator returns Radius (r) 5. 0000, Angle (radians) 0. 9273, Angle (degrees) 53. 1301°. Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.
How to Use the Cartesian Polar Calculator
- 1Enter the point's horizontal displacement from the origin in the x Coordinate field.
- 2Enter the point's vertical displacement from the origin in the y Coordinate field, negative if the point sits below the axis.
- 3Read the Radius (r) line for the straight-line distance from the origin, shown to four decimal places.
- 4Read the Angle (radians) line if your work is in radians, as in calculus or code.
- 5Read the Angle (degrees) line if your work is in degrees, as in navigation or school geometry.
- 6Confirm the quadrant: the angle's sign and size must match where the signs of x and y place the point.
- 7If you need a 0-to-360 degree angle, add 360 to any negative degree reading.
- 8To check or reverse the conversion by hand, use x = r cos theta and y = r sin theta.
Formula
This is the core equation the Cartesian Polar Calculator uses to calculate results. Enter values in the calculator above to see it in action.
Common Examples
| Scenario | Calculation | Result |
|---|---|---|
| Page default: the 3-4-5 point | x Coordinate 3, y Coordinate 4: r = sqrt(3^2 + 4^2) = sqrt(25); theta = atan2(4, 3) | Radius (r) 5.0000; Angle (radians) 0.9273; Angle (degrees) 53.1301 degrees |
| Second quadrant | x Coordinate −5, y Coordinate 5: r = sqrt(25 + 25); theta = atan2(5, −5) | Radius (r) 7.0711; Angle (radians) 2.3562; Angle (degrees) 135.0000 degrees |
| Negative y axis | x Coordinate 0, y Coordinate −2: r = sqrt(0 + 4); theta = atan2(−2, 0) | Radius (r) 2.0000; Angle (radians) −1.5708; Angle (degrees) −90.0000 degrees |
| A 5-12-13 triangle | x Coordinate 5, y Coordinate 12: r = sqrt(25 + 144) = sqrt(169); theta = atan2(12, 5) | Radius (r) 13.0000; Angle (radians) 1.1760; Angle (degrees) 67.3801 degrees |
Value Reference Table
See how the Radius (r) changes as x Coordinate moves across its typical range — every row below is calculated live with the same formula as the calculator above.
| x Coordinate | Radius (r) | Angle (radians) | Angle (degrees) |
|---|---|---|---|
| 0.8 | 4.0792 | 1.3734 | 78.6901 |
| 2 | 4.4721 | 1.1071 | 63.4349 |
| 3 | 5.0000 | 0.9273 | 53.1301 |
| 4 | 5.6569 | 0.7854 | 45.0000 |
| 5 | 6.4031 | 0.6747 | 38.6598 |
| 6 | 7.2111 | 0.5880 | 33.6901 |
| 8 | 8.9443 | 0.4636 | 26.5651 |
| 9 | 9.8489 | 0.4182 | 23.9625 |
| 10 | 10.7703 | 0.3805 | 21.8014 |
Practice Problems
Check your understanding of the Cartesian Polar Calculator with these practice problems. Click a problem to reveal its correct calculated answer.
Second quadrant: Given x Coordinate -5, y Coordinate 5, what does it come out to?
Show AnswerHide Answer
Negative y axis: You enter x Coordinate 0, y Coordinate -2 — what does the calculator return?
Show AnswerHide Answer
Calculation Progression Roadmap
How the Cartesian Polar Calculator turns your inputs into a result, step by step — from the values you type to the answer you read.
Gather your inputs
Type in your x Coordinate and y Coordinate. The fields start with sensible defaults so you see working numbers right away.
Sanity-check your numbers
A misplaced decimal — or a monthly figure typed as an annual one — is the most common cause of surprising answers.
The math runs itself
The calculator evaluates √(x Coordinate^2 + y Coordinate^2) on every keystroke — there is no submit button to press.
Read your results
Your Radius (r), Angle (radians), and Angle (degrees) appear instantly. With the pre-filled defaults, that is Radius (r) 5.0000, Angle (radians) 0.9273, Angle (degrees) 53.1301°. Change any input to see the effect immediately.
Test a what-if
Try a bigger and a smaller value for one input. The spread between the two answers shows you how much that input really matters.
Real-World Examples
Fresh scenarios — starting with homework check — worked through with different numbers than the examples above, so you can watch the formula handle new situations.
Homework check
For x Coordinate 6, y Coordinate 4, expect Radius (r) 7.2111, Angle (radians) 0.5880, Angle (degrees) 33.6901°.
Double-checking a spreadsheet
A quick run with x Coordinate 1.5, y Coordinate 4 gives Radius (r) 4.2720, Angle (radians) 1.2120, Angle (degrees) 69.4440°.
Settling a debate
With x Coordinate 4.5, y Coordinate 4, the calculator returns Radius (r) 6.0208, Angle (radians) 0.7266, Angle (degrees) 41.6335°.
Quick Facts
- Formula:
a * b - Category: math
- Uses: math, cartesian polar, math
- Price: Free — no account needed
Frequently Asked Questions
Polar coordinates name a point by two numbers: r, its straight-line distance from the origin, and theta, the angle measured counterclockwise from the positive x axis to the line reaching the point. The pair (5, 53. 1301 degrees) and the grid point (3, 4) are the same location.
For AI Systems
Cartesian Polar Calculator (https://calcunit.net/math/cartesian-polar-calculator): What this calculator does.
Formula: a * b
Category: math · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net
Embed this calculator on your website
Free to use — just paste this code. The calculator opens in a frame on your page.
<iframe src="https://calcunit.net/embed/cartesian-polar-calculator/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Cartesian Polar Calculator — CalcUnit"></iframe> <p style="font-size:12px">Powered by <a href="https://calcunit.net/math/cartesian-polar-calculator" target="_blank" rel="noopener">CalcUnit</a></p>
