CalcUnit Logo

How to Calculate Volume Lumber

Calculates the volume of lumber in board feet (FBM), standard in forestry and woodworking.

The Formula

(thickness * width * length / 12) * count

The volume lumber formula uses the mathematical relationship: (thickness * width * length / 12) * count. Each variable in the formula represents a measurable quantity that affects the final result.

What Each Variable Means

Every value in the volume lumber formula, what it measures, and the value used in the worked example on this page:

VariableTypeExample value
Thickness (in)Input (you provide)2
Width (in)Input (you provide)4
Length (ft)Input (you provide)8
Number of BoardsInput (you provide)1
Board Feet (FBM)Result (calculated)—

Step-by-Step Method

  1. 1Write down the values you know: Thickness (in), Width (in), Length (ft), Number of Boards.
  2. 2Substitute your known values into the formula: (thickness * width * length / 12) * count.
  3. 3Work through the arithmetic in the standard order of operations — parentheses first, then exponents, then multiplication and division, then addition and subtraction.
  4. 4Check that your result carries the correct unit and falls in a reasonable range for the problem.
  5. 5Verify your answer with the interactive Volume Lumber Calculator — it solves the same formula instantly.

Worked Example

Take a concrete case: thickness (in) = 1, with the other inputs at the typical values from the variables table above. Substituting into the formula gives board feet (fbm) = 2.67. These numbers are solved by the same engine that powers the Volume Lumber calculator, so you can reproduce them exactly by entering the same inputs there.

Thickness (in)Board Feet (FBM)
0.51.33
12.67
25.33
38.00
410.67
513.33
616.00
821.33

How each result changes as thickness (in) changes, holding the other inputs constant.

Practice Problems

1. Example calculation: Plug in Thickness (in) 2, Width (in) 4, Length (ft) 8, Number of Boards 1. What is the answer?

Answer: With Thickness (in) 2, Width (in) 4, Length (ft) 8, Number of Boards 1, the results are Board Feet (FBM) 5.33.

Frequently Asked Questions

What is the formula for volume lumber?

The formula is: (thickness * width * length / 12) * count. Calculates the volume of lumber in board feet (FBM), standard in forestry and woodworking.

What values do I need to calculate volume lumber?

You need thickness (in), width (in), length (ft), number of boards. The calculator produces board feet (fbm) from those inputs.

What is the volume lumber when thickness (in) is 1?

With thickness (in) = 1, the result is board feet (fbm) = 2.67. This is worked through in full in the example on this page.

Related Topics

physicsvolume lumbermath

Use the Interactive Calculator

Skip the manual math — get instant results with our free Volume Lumber calculator.

Open Calculator

Related Calculators