How to Calculate Permeability
Calculates the permeability of a porous medium using Darcy's Law.
The Formula
(flow * viscosity * length) / (area * dp)The permeability formula uses the mathematical relationship: (flow * viscosity * length) / (area * dp). Each variable in the formula represents a measurable quantity that affects the final result.
What Each Variable Means
Every value in the permeability formula, what it measures, and the value used in the worked example on this page:
| Variable | Type | Example value |
|---|---|---|
| Flow Rate (q, m³/s) | Input (you provide) | 0 |
| Fluid Viscosity (μ, Pa·s) | Input (you provide) | 0.001 |
| Length of Medium (L, m) | Input (you provide) | 0.1 |
| Cross-sectional Area (A, m²) | Input (you provide) | 0.01 |
| Pressure Difference (ΔP, Pa) | Input (you provide) | 100,000 |
| Permeability (k, m²) | Result (calculated) | — |
Step-by-Step Method
- 1Write down the values you know: Flow Rate (q, m³/s), Fluid Viscosity (μ, Pa·s), Length of Medium (L, m), Cross-sectional Area (A, m²), Pressure Difference (ΔP, Pa).
- 2Substitute your known values into the formula: (flow * viscosity * length) / (area * dp).
- 3Work through the arithmetic in the standard order of operations — parentheses first, then exponents, then multiplication and division, then addition and subtraction.
- 4Check that your result carries the correct unit and falls in a reasonable range for the problem.
- 5Verify your answer with the interactive Permeability Calculator — it solves the same formula instantly.
Worked Example
Take a concrete case: flow rate (q, m³/s) = 0, with the other inputs at the typical values from the variables table above. Substituting into the formula gives permeability (k, m²) = 0.0000000000050000. These numbers are solved by the same engine that powers the Permeability calculator, so you can reproduce them exactly by entering the same inputs there.
| Flow Rate (q, m³/s) | Permeability (k, m²) |
|---|---|
| 0 | 0.0000000000030000 |
| 0 | 0.0000000000050000 |
| 0 | 0.0000000000080000 |
| 0 | 0.0000000000100000 |
| 0 | 0.0000000000200000 |
| 0 | 0.0000000000300000 |
| 0 | 0.0000000000400000 |
How each result changes as flow rate (q, m³/s) changes, holding the other inputs constant.
Practice Problems
1. Example calculation: Flow Rate (q, m³/s) 0.0001, Fluid Viscosity (μ, Pa·s) 0.001, Length of Medium (L, m) 0.1, Cross-sectional Area (A, m²) 0.01, Pressure Difference (ΔP, Pa) 100,000 — work it out, then check the answer.
Answer: With Flow Rate (q, m³/s) 0.0001, Fluid Viscosity (μ, Pa·s) 0.001, Length of Medium (L, m) 0.1, Cross-sectional Area (A, m²) 0.01, Pressure Difference (ΔP, Pa) 100,000, the results are Permeability (k, m²) 0.0000000000100000.
Frequently Asked Questions
What is the formula for permeability?
The formula is: (flow * viscosity * length) / (area * dp). Calculates the permeability of a porous medium using Darcy's Law.
What values do I need to calculate permeability?
You need flow rate (q, m³/s), fluid viscosity (μ, pa·s), length of medium (l, m), cross-sectional area (a, m²), pressure difference (δp, pa). The calculator produces permeability (k, m²) from those inputs.
What is the permeability when flow rate (q, m³/s) is 0?
With flow rate (q, m³/s) = 0, the result is permeability (k, m²) = 0.0000000000050000. This is worked through in full in the example on this page.
Related Topics
Use the Interactive Calculator
Skip the manual math — get instant results with our free Permeability calculator.
