CalcUnit Logo

How to Calculate Flexural Strength

Calculates the flexural strength (ultimate bending strength) of a rectangular specimen under a three-point transverse bending load.

The Formula

(3 * load * length) / (2 * width * (thickness ^ 2))

The flexural strength formula uses the mathematical relationship: (3 * load * length) / (2 * width * (thickness ^ 2)). Each variable in the formula represents a measurable quantity that affects the final result.

What Each Variable Means

Every value in the flexural strength formula, what it measures, and the value used in the worked example on this page:

VariableTypeExample value
Failure Load (F, N)Input (you provide)1,200
Support Span Length (L, mm)Input (you provide)50
Specimen Width (b, mm)Input (you provide)15
Specimen Thickness (d, mm)Input (you provide)5
Flexural Strength (MPa)Result (calculated)—

Step-by-Step Method

  1. 1Write down the values you know: Failure Load (F, N), Support Span Length (L, mm), Specimen Width (b, mm), Specimen Thickness (d, mm).
  2. 2Substitute your known values into the formula: (3 * load * length) / (2 * width * (thickness ^ 2)).
  3. 3Work through the arithmetic in the standard order of operations — parentheses first, then exponents, then multiplication and division, then addition and subtraction.
  4. 4Check that your result carries the correct unit and falls in a reasonable range for the problem.
  5. 5Verify your answer with the interactive Flexural Strength Calculator — it solves the same formula instantly.

Worked Example

Take a concrete case: failure load (f, n) = 600, with the other inputs at the typical values from the variables table above. Substituting into the formula gives flexural strength (mpa) = 120.00. These numbers are solved by the same engine that powers the Flexural Strength calculator, so you can reproduce them exactly by entering the same inputs there.

Failure Load (F, N)Flexural Strength (MPa)
30060.00
600120.00
900180.00
1,000200.00
2,000400.00
3,000600.00
4,000800.00
5,0001000.00

How each result changes as failure load (f, n) changes, holding the other inputs constant.

Practice Problems

1. Example calculation: Plug in Failure Load (F, N) 1,200, Support Span Length (L, mm) 50, Specimen Width (b, mm) 15, Specimen Thickness (d, mm) 5. What is the answer?

Answer: The calculator returns Flexural Strength (MPa) 240.00 for Failure Load (F, N) 1,200, Support Span Length (L, mm) 50, Specimen Width (b, mm) 15, Specimen Thickness (d, mm) 5.

Frequently Asked Questions

What is the formula for flexural strength?

The formula is: (3 * load * length) / (2 * width * (thickness ^ 2)). Calculates the flexural strength (ultimate bending strength) of a rectangular specimen under a three-point transverse bending load.

What values do I need to calculate flexural strength?

You need failure load (f, n), support span length (l, mm), specimen width (b, mm), specimen thickness (d, mm). The calculator produces flexural strength (mpa) from those inputs.

What is the flexural strength when failure load (f, n) is 600?

With failure load (f, n) = 600, the result is flexural strength (mpa) = 120.00. This is worked through in full in the example on this page.

Related Topics

physicsflexural strengthmath

Use the Interactive Calculator

Skip the manual math — get instant results with our free Flexural Strength calculator.

Open Calculator

Related Calculators