How to Calculate Creep Rate
Calculates the steady-state creep rate (deformation rate under constant stress and temperature over time).
The Formula
(strain_final - strain_initial) / timeThe creep rate formula uses the mathematical relationship: (strain_final - strain_initial) / time. Each variable in the formula represents a measurable quantity that affects the final result.
What Each Variable Means
Every value in the creep rate formula, what it measures, and the value used in the worked example on this page:
| Variable | Type | Example value |
|---|---|---|
| Initial Strain (ε₀) | Input (you provide) | 0.001 |
| Final Strain (εₜ) | Input (you provide) | 0.005 |
| Time Elapsed (hours) | Input (you provide) | 100 |
| Creep Rate (per hour) | Result (calculated) | — |
Step-by-Step Method
- 1Write down the values you know: Initial Strain (ε₀), Final Strain (εₜ), Time Elapsed (hours).
- 2Substitute your known values into the formula: (strain_final - strain_initial) / time.
- 3Work through the arithmetic in the standard order of operations — parentheses first, then exponents, then multiplication and division, then addition and subtraction.
- 4Check that your result carries the correct unit and falls in a reasonable range for the problem.
- 5Verify your answer with the interactive Creep Rate Calculator — it solves the same formula instantly.
Worked Example
Take a concrete case: initial strain (ε₀) = 0.001, with the other inputs at the typical values from the variables table above. Substituting into the formula gives creep rate (per hour) = 0.000045. These numbers are solved by the same engine that powers the Creep Rate calculator, so you can reproduce them exactly by entering the same inputs there.
| Initial Strain (ε₀) | Creep Rate (per hour) |
|---|---|
| 0 | 0.000047 |
| 0.001 | 0.000045 |
| 0.001 | 0.000042 |
| 0.001 | 0.000040 |
| 0.002 | 0.000030 |
| 0.003 | 0.000020 |
| 0.004 | 0.000010 |
How each result changes as initial strain (ε₀) changes, holding the other inputs constant.
Practice Problems
1. Example calculation: With Initial Strain (ε₀) 0.001, Final Strain (εₜ) 0.005, Time Elapsed (hours) 100, what are the results?
Answer: The calculator returns Creep Rate (per hour) 0.000040 for Initial Strain (ε₀) 0.001, Final Strain (εₜ) 0.005, Time Elapsed (hours) 100.
Frequently Asked Questions
What is the formula for creep rate?
The formula is: (strain_final - strain_initial) / time. Calculates the steady-state creep rate (deformation rate under constant stress and temperature over time).
What values do I need to calculate creep rate?
You need initial strain (ε₀), final strain (εₜ), time elapsed (hours). The calculator produces creep rate (per hour) from those inputs.
What is the creep rate when initial strain (ε₀) is 0.001?
With initial strain (ε₀) = 0.001, the result is creep rate (per hour) = 0.000045. This is worked through in full in the example on this page.
Related Topics
Use the Interactive Calculator
Skip the manual math — get instant results with our free Creep Rate calculator.
