How to Calculate Area Of Sector
Calculates the area of a circular sector using its radius and central angle.
The Formula
0.5 * r^2 * (angle * PI / 180)The area of sector formula uses the mathematical relationship: 0.5 * r^2 * (angle * PI / 180). Each variable in the formula represents a measurable quantity that affects the final result.
What Each Variable Means
Every value in the area of sector formula, what it measures, and the value used in the worked example on this page:
| Variable | Type | Example value |
|---|---|---|
| Radius | Input (you provide) | 5 |
| Central Angle (degrees) | Input (you provide) | 60 |
| Area | Result (calculated) | — |
Step-by-Step Method
- 1Write down the values you know: Radius, Central Angle (degrees).
- 2Substitute your known values into the formula: 0.5 * r^2 * (angle * PI / 180).
- 3Work through the arithmetic in the standard order of operations — parentheses first, then exponents, then multiplication and division, then addition and subtraction.
- 4Check that your result carries the correct unit and falls in a reasonable range for the problem.
- 5Verify your answer with the interactive Area Of Sector Calculator — it solves the same formula instantly.
Worked Example
Take a concrete case: radius = 3, with the other inputs at the typical values from the variables table above. Substituting into the formula gives area = 4.7124. These numbers are solved by the same engine that powers the Area Of Sector calculator, so you can reproduce them exactly by entering the same inputs there.
| Radius | Area |
|---|---|
| 1 | 0.5236 |
| 3 | 4.7124 |
| 4 | 8.3776 |
| 5 | 13.0900 |
| 6 | 18.8496 |
| 8 | 33.5103 |
| 10 | 52.3599 |
| 20 | 209.4395 |
How each result changes as radius changes, holding the other inputs constant.
Practice Problems
1. Example calculation: Given Radius 5, Central Angle (degrees) 60, what does it come out to?
Answer: The calculator returns Area 13.0900 for Radius 5, Central Angle (degrees) 60.
Frequently Asked Questions
What is the formula for area of sector?
The formula is: 0.5 * r^2 * (angle * PI / 180). Calculates the area of a circular sector using its radius and central angle.
What values do I need to calculate area of sector?
You need radius, central angle (degrees). The calculator produces area from those inputs.
What is the area of sector when radius is 3?
With radius = 3, the result is area = 4.7124. This is worked through in full in the example on this page.
Related Topics
Use the Interactive Calculator
Skip the manual math — get instant results with our free Area Of Sector calculator.
