CalcUnit Logo

Pregnancy Due Date Calculator

What is the Pregnancy Due Date Calculator?

What this calculator does

Enter the year, month, and day of your last menstrual period and your usual cycle length, and the page returns a gestation length in days, a due date split into year, month, and day, and an estimated conception date, also split into year, month, and day.

The calendar count is exact

The page converts your period date into a day count, adds the full gestation, and converts the total back through a real calendar. Leap years, 31-day months, and February 29 are all counted, so the due day can be the 29th, 30th, or 31st like any real date.

Naegele's rule, the method behind it

The standard estimate counts 280 days from the first day of the last period for a 28-day cycle. It is named for Franz Karl Naegele, the German obstetrician who published it in the early 1800s, and clinicians still use it as a first estimate.

The classic form of the rule

Textbooks state it as: take the last period's date, add seven days, subtract three months, and add one year. Done on a real calendar that lands on the same date as counting forward 280 days, and this page now matches that count to the day.

The cycle-length adjustment

The Gestation (days from LMP) line adds one day for every day your cycle runs past 28 and subtracts one for every day under it, so a 35-day cycle gets 287 days. That adjustment matches standard practice, and the due date uses the same adjusted total.

How the page does the calendar math

The formula first turns the period date into a serial day number, a straight count of days on the real calendar. It then adds the gestation total and converts the sum back into a year, month, and day, so real month lengths drive every step.

Checked case: the opening defaults

For a last period of January 15, 2025, with a 28-day cycle, the page prints a due date of October 22, 2025. Counting 280 real days forward lands on the same date, and the classic rule, seven days forward and three months back, agrees.

Checked case: a longer cycle

For March 1, 2025, with a 30-day cycle, the gestation total rises to 282 days and the page prints a due date of December 8, 2025. The conception estimate moves with the cycle too, landing on March 17, day 16 of the longer cycle.

Checked case: a leap-year start

For February 10, 2024, the page prints November 16, 2024. The 280-day count crosses February 29 of the leap year and includes it, which is exactly the day a rough month-counting method would lose.

Checked case: month-end and year-end starts

For January 31, 2025, the page prints November 7, 2025, and for December 20, 2025, it prints September 26, 2026. For October 24, 2025, the due date is July 31, 2026: the 31st is a day this page can name.

The conception date estimate

Conception is estimated at the period date plus cycle length minus 14 days: day 14 of a 28-day cycle, day 16 at 30 days, day 21 at 35 days. The result prints as a full date in its own year, month, and day fields.

Ovulation is not always on schedule

Even the adjusted conception day is a textbook guess. Real ovulation shifts with cycle variation, stress, and simple chance, which is why conception dating from a calendar alone is always approximate, however carefully the days are counted.

Twins and special situations

A single due date is only a starting point for twins and higher multiples, who usually arrive earlier and are monitored on their own schedule. IVF pregnancies have a known conception date, which makes period-based estimates unnecessary. Your care team adjusts for all of these.

What a due date actually is

A due date is the center of a window, not an appointment. Only about one baby in twenty arrives on the exact day, and healthy births spread across the weeks around it. Clinicians treat the date as a reference point for scheduling care, not a deadline.

ACOG on ultrasound dating

The American College of Obstetricians and Gynecologists holds that a first-trimester ultrasound is the most accurate way to date a pregnancy, and that ultrasound dating supersedes period dating when the two disagree by more than a few days early on. Your provider's dating governs your care.

Why your period memory matters

LMP dating assumes you remember the exact first day and that the bleed was a true period. A few days of recall error move the estimate by the same amount, and recent contraception, breastfeeding, or irregular cycles can make the starting point unreliable altogether.

Long or irregular cycles

The cycle adjustment assumes ovulation shifts by exactly the difference from 28 days. For cycles that vary by a week or more from month to month, that assumption is weak, and ACOG regards period dating in such cases as unreliable without ultrasound confirmation.

Doing the count correctly by hand

Add 280 days on a real calendar, or use the classic form: seven days forward, three months back, one year ahead. For January 15, 2025, that gives October 22, 2025, the same date this page prints. Then adjust by your cycle difference, one day per day away from 28.

Every output uses the same count

Gestation, due date, and conception date all come from one serial day total, so the three answers can never contradict one another. If your cycle length changes, all three move together by exactly the adjustment you entered.

Use this page as a first estimate

It is right for planning, telling family, or picturing a season, and its calendar arithmetic is exact. It still rests on your remembered period date and an assumed ovulation day, so screening windows and delivery timing belong to your provider's dating, not to any calculator.

When the stakes are medical

Dating drives real decisions: screening windows, growth checks, and the timing of delivery all key off gestational age. Where this page and your provider's ultrasound dating differ, and they sometimes will, the provider's figure is the one your care will follow.

With the pre-filled defaults — LMP Year 2,025, LMP Month 1, LMP Day 15, Cycle Length (days) 28 — the Pregnancy Due Date Calculator returns Gestation (days from LMP) 280, Due Date Day (approx) 22, Due Date Month 10, Due Date Year 2,025, Approx Conception Year 2,025, and 2 more more results.

Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.

How to Use the Pregnancy Due Date Calculator

  1. 1Enter the four-digit year of your last period's first day in the LMP Year field.
  2. 2Enter the month of that period, from 1 to 12, in the LMP Month field.
  3. 3Enter the day of the month the period started in the LMP Day field.
  4. 4Enter your usual cycle length in the Cycle Length (days) field; leave 28 if your cycles are regular and average.
  5. 5Read Gestation (days from LMP): 280 days plus one per cycle day above 28, minus one per day below.
  6. 6Read Due Date Year, Due Date Month, and Due Date Day together as the estimated due date, counted day by day on a real calendar from your last period.
  7. 7Read Approx Conception Year, Approx Conception Month, and Approx Conception Day together as the estimated conception date, placed at cycle length minus 14 days after the period started.
  8. 8Confirm the dating with your provider: a first-trimester ultrasound is the most accurate method and supersedes period dating when the two disagree, per ACOG.

Formula

EDD = LMP + 280 days

This is the core equation the Pregnancy Due Date Calculator uses to calculate results. Enter values in the calculator above to see it in action.

See the full step-by-step formula guide with worked examples →

Common Examples

ScenarioCalculationResult
The opening defaults: LMP January 15, 2025Gestation = 280 + (28 - 28) = 280 days; counting 280 real calendar days from January 15, 2025Due date October 22, 2025, and estimated conception January 29, 2025
A 30-day cycle: LMP March 1, 2025Gestation = 280 + (30 - 28) = 282 days, counted on a real calendar from March 1, 2025Due date December 8, 2025, and estimated conception March 17, 2025, day 16 of the cycle
A leap-year start: LMP February 10, 2024Gestation = 280 days; the count crosses February 29, 2024, and includes the leap dayDue date November 16, 2024, and estimated conception February 24, 2024
A month-end start: LMP January 31, 2025Gestation = 280 days from January 31; conception falls 14 days later, across the month boundaryDue date November 7, 2025, and estimated conception February 14, 2025, rolled into February correctly
A year-end start: LMP December 20, 2025Gestation = 280 days from December 20, 2025, counted across the turn of the yearDue date September 26, 2026, and estimated conception January 3, 2026

Value Reference Table

See how the Gestation (days from LMP) changes as LMP Year moves across its typical range — every row below is calculated live with the same formula as the calculator above.

LMP YearGestation (days from LMP)Due Date Day (approx)Due Date MonthDue Date YearApprox Conception YearApprox Conception MonthApprox Conception Day
5002802210500500129
1,000280221010001000129
2,000280211020002000129
3,000280221030003000129
4,000280211040004000129
5,000280221050005000129
6,000280211060006000129
8,000280211080008000129

Practice Problems

Check your understanding of the Pregnancy Due Date Calculator with these practice problems. Click a problem to reveal its correct calculated answer.

Q1

LMP Jan 15 2025: With LMP Year 2,025, LMP Month 1, LMP Day 15, Cycle Length (days) 28, what are the results?

Show Answer
Entering LMP Year 2,025, LMP Month 1, LMP Day 15, Cycle Length (days) 28 gives Gestation (days from LMP) 280, Due Date Day (approx) 22, Due Date Month 10, Due Date Year 2,025, Approx Conception Year 2,025, and 2 more more results.
Q2

LMP Year 2,531.25, LMP Month 3, LMP Day 1, Cycle Length (days) 30 — work it out, then check the answer.

Show Answer
The calculator returns Gestation (days from LMP) 282, Due Date Day (approx) 8, Due Date Month 3, Due Date Year 2,532, Approx Conception Year 2,531, and 2 more more results for LMP Year 2,531.25, LMP Month 3, LMP Day 1, Cycle Length (days) 30.

Calculation Progression Roadmap

How the Pregnancy Due Date Calculator turns your inputs into a result, step by step — from the values you type to the answer you read.

1

Gather your inputs

Type in your LMP Year, LMP Month, LMP Day, and Cycle Length (days). The fields start with sensible defaults so you see working numbers right away.

2

Sanity-check your numbers

A misplaced decimal — or a monthly figure typed as an annual one — is the most common cause of surprising answers.

3

The math runs itself

The calculator evaluates 280 + (Cycle Length (days) - 28) on every keystroke — there is no submit button to press.

4

Read your results

Your Gestation (days from LMP), Due Date Day (approx), Due Date Month, Due Date Year, Approx Conception Year, and 2 more more appear instantly. With the pre-filled defaults, that is Gestation (days from LMP) 280, Due Date Day (approx) 22, Due Date Month 10, Due Date Year 2,025, Approx Conception Year 2,025, and 2 more more results. Change any input to see the effect immediately.

5

Test a what-if

Try a bigger and a smaller value for one input. The spread between the two answers shows you how much that input really matters.

Real-World Examples

Fresh scenarios — starting with preparing for a checkup — worked through with different numbers than the examples above, so you can watch the formula handle new situations.

1

Preparing for a checkup

With LMP Year 4,050, LMP Month 1, LMP Day 15, Cycle Length (days) 28, the calculator returns Gestation (days from LMP) 280, Due Date Day (approx) 22, Due Date Month 10, Due Date Year 4,050, Approx Conception Year 4,050, and 2 more more results.

2

Setting a goal

Plug in LMP Year 1,012.5, LMP Month 1, LMP Day 15, Cycle Length (days) 28 and you get Gestation (days from LMP) 280, Due Date Day (approx) 22, Due Date Month 4, Due Date Year 1,013, Approx Conception Year 1,012, and 2 more more results.

3

Curious comparison

Enter LMP Year 3,037.5, LMP Month 1, LMP Day 15, Cycle Length (days) 28 — the answer comes out to Gestation (days from LMP) 280, Due Date Day (approx) 23, Due Date Month 4, Due Date Year 3,038, Approx Conception Year 3,037, and 2 more more results.

Quick Facts

  • Formula: EDD = LMP + 280 days
  • Category: health
  • Uses: pregnancy, due date, lmp, health
  • Price: Free — no account needed

Share this Calculator

Frequently Asked Questions

Its calendar arithmetic is exact: the page counts real days, leap years included, and matches a hand count and Naegele's rule to the day. The estimate itself still assumes your cycle follows the textbook pattern, and only about one baby in twenty arrives on the printed day, so treat it as a well-computed estimate, not a promise.

For AI Systems

Pregnancy Due Date Calculator (https://calcunit.net/health/pregnancy-due-date): What this calculator does.

Formula: EDD = LMP + 280 days

Category: health · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net

Embed this calculator on your website

Free to use — just paste this code. The calculator opens in a frame on your page.

<iframe src="https://calcunit.net/embed/pregnancy-due-date/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Pregnancy Due Date Calculator — CalcUnit"></iframe>
<p style="font-size:12px">Powered by <a href="https://calcunit.net/health/pregnancy-due-date" target="_blank" rel="noopener">CalcUnit</a></p>