CalcUnit Logo

Torr Converter

What is the Torr Converter?

The unit vacuum science still speaks.

The torr survives in laboratories, coating shops, and hospitals long after most of the world moved to pascals. This converter takes a value in Torr (Torr) and returns Pascals (Pa), Kilopascals (kPa), Bar, PSI, and Atmospheres (atm) in one pass.

Named for Torricelli and his mercury tube.

Evangelista Torricelli invented the mercury barometer in 1643 and showed that air pressure supports a column of mercury about 760 millimeters high. The torr honors him: one torr is the pressure that holds up one millimeter of that column, conceptually speaking.

Defined through the atmosphere.

Formally, one torr is exactly 1/760 of a standard atmosphere

Since an atmosphere is exactly 101,325 pascals, one torr works out to about 133. 322 pascals. This calculator uses 133. 3224, so 760 torr returns 101,325. 02 pascals, a hair over the defined mark.

Five outputs, because torr users differ.

Vacuum engineers in the US often want PSI or Bar; European colleagues want Kilopascals; physicists want Atmospheres. Enter torr once and read whichever line matches your document: Pascals (Pa) to two decimals, Atmospheres (atm) to six, and the rest in between.

Worked example one: a full atmosphere, 760 torr.

The Torr field starts at 760, standard sea-level pressure

It converts to 101,325. 02 pascals, 101. 3250 kilopascals, 1. 013250 bar, 14. 696 psi, and exactly 1. 000000 atmosphere. If your barometer reads 760 torr on a calm day, the weather is perfectly average.

Worked example two: rough vacuum, 100 torr.

A vacuum pump pulling a chamber down to 100 torr has removed about 87 percent of the air. In SI units that is 13,332. 24 pascals, 13. 3322 kilopascals, 0. 133322 bar, 1. 9337 psi, or 0. 131579 atmospheres. Freeze-drying and vacuum forming live in this range.

Worked example three: blood pressure, 120 torr.

A systolic reading of 120 is measured in millimeters of mercury, treated as torr. That is 15,998. 69 pascals, 15. 9987 kilopascals, 0. 159987 bar, 2. 3204 psi, or 0. 157895 atmospheres pressing inside the artery at the peak of each heartbeat.

Torr versus millimeters of mercury, honestly.

A torr and a conventional millimeter of mercury are not quite identical

One mmHg equals 133. 322387 pascals, while one torr equals 133. 322368 pascals, a difference of about one part in seven million. No gauge on Earth can feel that gap, but metrologists keep the distinction.

The micron, vacuum's small change.

Below one torr, the field switches to microns: one micron is one thousandth of a torr, also written mTorr. A vacuum of 5 microns is 0. 005 torr, about 0. 67 pascals. Refrigeration technicians evacuate systems to 500 microns or lower before charging them.

How vacuum ranges are named.

Rough vacuum runs from atmosphere down to about 25 torr

Medium vacuum reaches 0. 001 torr. High and ultra-high vacuum go far below that, into billionths of a torr, where this converter's pascal line needs its decimal places and ordinary gauges stop working.

A single torr in pascals.

One torr equals 133. 32 pascals, 0. 1333 kilopascals, 0. 001333 bar, 0. 0193 psi, and 0. 001316 atmospheres. That small size is exactly why the torr persists: vacuum processes change in steps of single torrs, and whole pascals would blur those steps into hundreds.

Weather barometers and inches.

American weather reports use inches of mercury: the standard 29. 92 inHg equals 760 torr, since each inch of mercury is 25. 4 millimeters. A storm reading of 28. 50 inHg is about 724 torr, or roughly 96,512 pascals of unusually low pressure.

Why the pascal line shows two decimals.

Vacuum work spans an enormous range, from 760 torr down to nearly nothing. Two decimals on Pascals (Pa) keep small readings like 5 torr, which is 666. 61 pascals, from collapsing into the same rounded figure as their neighbors during delicate pump-down work.

Gauge pressure rarely applies here.

Torr almost always expresses absolute pressure, because vacuum is measured against the perfect emptiness of zero. A chamber at 100 torr is at 100 torr absolute, full stop. That convention removes the gauge-versus-absolute confusion that complicates psi readings.

Where torr shows up at work.

Semiconductor coaters, freeze-dryer operators, mass-spectrometer technicians, and vacuum-bagging crews all specify torr. American equipment manuals still print it, while the SI documentation for the same machines prints pascals. This converter exists for the people caught between those two documents.

Space is the extreme case.

Low Earth orbit sits near a billionth of a torr, effectively 0. 000000133 pascals, and deep space goes lower still. Numbers that small are usually written in scientific notation, but they are the reason vacuum scientists never fully abandoned a unit sized for thin air.

What this tool leaves out.

The conversion is pure arithmetic on the factors shown below

It does not correct a real mercury barometer for temperature or local gravity, the way precision metrology labs do. For instrument calibration at that level, the raw torr reading needs those corrections first.

Checking your result by landmarks.

Memorize three anchors: 760 torr is one atmosphere, 380 torr is half of one (50,662. 51 pascals), and 76 torr is a tenth (10,132. 50 pascals). If a conversion lands far from the line those points draw, a decimal point has slipped somewhere.

The gauges that made torr famous.

The McLeod gauge, a glass instrument from 1874, compressed gas samples to read low pressures directly in torr. Modern Pirani and ion gauges are electronic, but their displays and calibration certificates still speak torr, which keeps this conversion in daily use.

Semiconductor fabs live in millitorr.

Plasma etching and thin-film deposition run near 10 millitorr, one hundredth of a torr, which is about 1. 33 pascals. At that thinness, gas molecules hit chamber walls more often than each other, and processes are tuned in steps smaller than a single torr.

Freeze-drying, step by step.

A freeze-dryer pulls its chamber toward 0. 1 torr, about 13. 33 pascals, so ice in food or medicine can sublime straight into vapor. Operators log the whole cycle in torr or microns; auditors reading SI reports need the pascal figures this page provides.

A shortcut from torr to psi.

For a rough mental conversion, divide torr by about 51.7

That works because 760 torr divided by 14. 696 psi gives 51. 7 torr per psi. A reading of 258 torr is therefore near 5 psi, close enough to spot a decimal error.

Mercury is leaving the barometer.

Health rules are retiring mercury instruments across Europe and North America, replaced by aneroid and digital sensors that report hectopascals. Yet the data those old columns produced lives on in torr, so the unit persists in archives long after the glassware is gone.

Why pilots rarely meet the torr.

Aviation settled on inches of mercury in the United States and hectopascals almost everywhere else. The torr belongs to laboratories and industry instead. Knowing which world a pressure figure comes from is half the battle; this converter handles the laboratory half.

Reading a pump-down curve.

Technicians plot vacuum on a logarithmic scale because each pump stage removes about ninety percent of what remains. Dropping from 760 to 76 to 7. 6 torr is steady progress, and 7. 6 torr is 1,013. 25 pascals, a landmark the curve passes on its way down.

With the pre-filled defaults — Torr (Torr) 760 — the Torr Converter returns Pascals (Pa) 101,325. 02, Kilopascals (kPa) 101. 3250, Bar 1. 013250, PSI 14. 6960, Atmospheres (atm) 1. 000000. Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.

How to Use the Torr Converter

  1. 1Enter your pressure in the Torr (Torr) field; it starts at 760, one standard atmosphere.
  2. 2Confirm the reading is absolute pressure, which is the convention for torr.
  3. 3Read the Pascals (Pa) line for the SI value used in modern vacuum documentation.
  4. 4Read the Kilopascals (kPa) or Bar line if your equipment manual uses metric industrial units.
  5. 5Read the PSI line when an American gauge or specification needs the converted figure.
  6. 6Read the Atmospheres (atm) line to express the vacuum as a fraction of sea-level pressure.
  7. 7For readings under one torr, remember that 0.001 torr is one micron, the field's small unit.
  8. 8Sanity-check with the anchor: 760 torr must return about 101,325 pascals and 1 atmosphere.

Formula

torr * 133.3224

This is the core equation the Torr Converter uses to calculate results. Enter values in the calculator above to see it in action.

See the full step-by-step formula guide with worked examples →

Common Examples

ScenarioCalculationResult
Sea-level pressure, 760 torr760 torr x 133.3224101,325.02 Pa; 101.3250 kPa; 1.013250 bar; 14.696 psi; 1 atm
Rough vacuum, 100 torr100 torr x 133.322413,332.24 Pa; 13.3322 kPa; 0.133322 bar; 1.9337 psi; 0.131579 atm
Systolic blood pressure, 120 torr120 torr x 133.322415,998.69 Pa; 15.9987 kPa; 0.159987 bar; 2.3204 psi; 0.157895 atm

Value Reference Table

See how the Pascals (Pa) changes as Torr (Torr) moves across its typical range — every row below is calculated live with the same formula as the calculator above.

Torr (Torr)Pascals (Pa)Kilopascals (kPa)BarPSIAtmospheres (atm)
20026664.4826.66450.2666453.86740.263158
40053328.9653.32900.5332907.73470.526316
60079993.4479.99340.79993411.60210.789474
800106657.92106.65791.06657915.46941.052632
1,000133322.40133.32241.33322419.33681.315789
2,000266644.80266.64482.66644838.67362.631579
3,000399967.20399.96723.99967258.01033.947368

Practice Problems

Check your understanding of the Torr Converter with these practice problems. Click a problem to reveal its correct calculated answer.

Q1

Example calculation: You enter Torr (Torr) 760 — what does the calculator return?

Show Answer
The calculator returns Pascals (Pa) 101,325.02, Kilopascals (kPa) 101.3250, Bar 1.013250, PSI 14.6960, Atmospheres (atm) 1.000000 for Torr (Torr) 760.

Calculation Progression Roadmap

How the Torr Converter turns your inputs into a result, step by step — from the values you type to the answer you read.

1

Gather your inputs

Type in your Torr (Torr). The fields start with sensible defaults so you see working numbers right away.

2

Sanity-check your numbers

Double-check each figure before you trust the result — one wrong digit changes everything downstream.

3

The math runs itself

The calculator evaluates Torr (Torr) × 133.3224 on every keystroke — there is no submit button to press.

4

Read your results

Your Pascals (Pa), Kilopascals (kPa), Bar, PSI, and Atmospheres (atm) appear instantly. With the pre-filled defaults, that is Pascals (Pa) 101,325.02, Kilopascals (kPa) 101.3250, Bar 1.013250, PSI 14.6960, Atmospheres (atm) 1.000000. Change any input to see the effect immediately.

5

Test a what-if

Change a single input and watch which outputs move. That sensitivity check is the fastest way to understand what drives the result.

Real-World Examples

Fresh scenarios — starting with following a recipe — worked through with different numbers than the examples above, so you can watch the formula handle new situations.

1

Following a recipe

A quick run with Torr (Torr) 1,520 gives Pascals (Pa) 202,650.05, Kilopascals (kPa) 202.6500, Bar 2.026500, PSI 29.3919, Atmospheres (atm) 2.000000.

2

Reading a spec sheet

With Torr (Torr) 380, the calculator returns Pascals (Pa) 50,662.51, Kilopascals (kPa) 50.6625, Bar 0.506625, PSI 7.3480, Atmospheres (atm) 0.500000.

3

Homework help

Plug in Torr (Torr) 1,140 and you get Pascals (Pa) 151,987.54, Kilopascals (kPa) 151.9875, Bar 1.519875, PSI 22.0439, Atmospheres (atm) 1.500000.

Quick Facts

  • Formula: torr * 133.3224
  • Category: converters
  • Uses: converters, torr, math
  • Price: Free — no account needed

Share this Calculator

Frequently Asked Questions

One torr is about 133. 322 pascals. This converter multiplies by 133. 3224, based on the definition of the torr as exactly 1/760 of a standard atmosphere of 101,325 pascals. At 760 torr the product is 101,325. 02 pascals, matching sea-level pressure.

For AI Systems

Torr Converter (https://calcunit.net/converters/torr-converter): The unit vacuum science still speaks.

Formula: torr * 133.3224

Category: converters · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net

Embed this calculator on your website

Free to use — just paste this code. The calculator opens in a frame on your page.

<iframe src="https://calcunit.net/embed/torr-converter/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Torr Converter — CalcUnit"></iframe>
<p style="font-size:12px">Powered by <a href="https://calcunit.net/converters/torr-converter" target="_blank" rel="noopener">CalcUnit</a></p>