Rectangular To Polar Calculator
What is the Rectangular To Polar Calculator?
What this calculator converts.
This calculator converts rectangular coordinates, a point given as x and y, into polar coordinates: a distance from the origin and an angle. It returns the angle twice, in degrees and in radians, so either convention is ready to use. Students, electrical engineers, roboticists, and game programmers all switch between these two descriptions of the same point.
Two ways to name the same point.
Rectangular coordinates say how far to step sideways and how far to step up. Polar coordinates say how far to travel in a straight line and which direction to face. The point itself never moves; only the description changes. Converting between the two is a daily task wherever rotation, direction, or circular motion is involved.
The radius: straight-line distance.
The radius, labeled Radius (r), is the distance from the origin to the point, computed with the Pythagorean theorem: the square root of x squared plus y squared. Because it comes from a square root of squares, the radius is never negative. A point at (3, 4) sits exactly 5 units from the origin.
The angle: direction from the positive x axis.
The angle measures rotation counterclockwise from the positive x axis, which points to the right. Straight up is 90 degrees, straight left is 180, straight down is negative 90, and straight right is 0. The calculator reports this angle in the range from negative 180 to positive 180 degrees, or negative pi to positive pi radians.
Why the formula uses atan2.
A plain arctangent of y divided by x cannot tell opposite quadrants apart, because it loses the individual signs. For the point (-6, 8), plain arctangent of 8 divided by negative 6 returns negative 53. 1301 degrees, pointing down-right, which is the wrong corner entirely. The atan2 function reads both signs separately and returns 126.
8699 degrees, the true up-left direction.
Reading the three outputs.
Radius (r) comes first and needs no unit conversion
Angle (Degrees) carries the degree suffix and suits navigation, surveying, and intuition. Angle (Radians) carries the rad suffix and suits calculus and code. All three are shown to four decimal places, which is more precision than most measurements that feed them can honestly claim.
Worked example one: the 3-4-5 point.
Enter 3 in the x Coordinate field and 4 in the y Coordinate field, the values the page opens with. The radius reads 5. The angle reads 53. 1301 degrees, or 0. 9273 rad. This is the most famous right triangle in mathematics doing double duty as a coordinate conversion, worth memorizing as a sanity check.
Worked example two: the 5-12-13 point.
Enter 5 for x and 12 for y
The radius reads 13, and the angle reads 67. 3801 degrees, or 1. 1760 rad. Pythagorean triples like this one produce exact radii, which makes them ideal test inputs: if a tool or a hand calculation returns anything but 13 for the radius, the error is easy to spot.
Worked example three: the second quadrant.
Enter negative 6 for x and 8 for y
The radius reads 10, and the angle reads 126. 8699 degrees, or 2. 2143 rad. The angle lands past 90 because the point sits up and to the left. This is the case that breaks naive arctangent formulas, and the case atan2 was invented to handle.
Points sitting on the axes.
Enter 10 for x and 0 for y and the angle reads exactly 0 degrees, pointing straight right. Enter 0 for x and negative 9 for y and the radius reads 9 while the angle reads negative 90 degrees, or negative 1. 5708 rad, pointing straight down. Axis points give the cleanest angles in the whole system.
Negative angles are normal.
An angle below the x axis comes back negative, and that is information, not an error: it says the point lies in the lower half of the plane. If your convention wants bearings from 0 to 360 instead, add 360 to any negative result. Negative 90 degrees becomes 270, pointing down either way you write it.
Phasors: the engineering anchor.
In AC circuit work, voltages, currents, and impedances are phasors, quantities with a magnitude and a phase angle. Suppose a circuit presents 40 ohms of resistance on the x axis and 30 ohms of reactance on the y axis. This calculator returns a magnitude of 50 ohms at an angle of 36. 8699 degrees, exactly the form engineers write.
The complex number connection.
A complex number a plus bi is a rectangular coordinate pair in disguise, and its polar form, magnitude and angle, is what this calculator returns. The number 3 plus 4i has magnitude 5 and angle 53. 1301 degrees. Powers and roots of complex numbers are far easier in polar form, which is why the conversion matters in signal processing.
Degrees or radians: which reading to use.
Reach for degrees when humans will read the answer: maps, bearings, mechanical drawings, and classroom work. Reach for radians when mathematics or software will consume it: calculus requires radians, and the atan2 function in nearly every programming language returns radians. This calculator shows both precisely so the choice costs you no extra step.
Precision: four decimal places everywhere.
Radius, degrees, and radians are each rounded at the fourth decimal
On the radius, that is a ten-thousandth of whatever unit you entered, finer than a machinist's typical tolerance. On the angle, four decimals of a degree is about two centimeters of arc on the ground at a distance of ten kilometers.
Mistake one: swapping x and y.
The angle is measured from the x axis, so the order of the inputs matters. Swapping the 3 and 4 gives a radius of 5 still, but an angle of 36. 8699 degrees instead of 53. 1301, the complement. When an angle looks suspiciously like 90 minus the expected answer, swapped coordinates are the usual cause.
Mistake two: expecting 0 to 360.
Many newcomers expect every angle in the 0 to 360 range and are startled by negative results. The atan2 convention deliberately uses negative 180 to positive 180, keeping the sign as a quadrant signal. Convert only at the end, and only if the receiving system, such as a compass bearing, actually demands the unsigned form.
A note on compass bearings.
Even after adding 360, this angle is not a compass bearing
Bearings start at north and grow clockwise; mathematical angles start at the positive x axis, effectively east, and grow counterclockwise. Converting between them takes one more step: subtract the mathematical angle from 90, then adjust into the 0 to 360 range if the result falls outside it.
Converting back by hand.
To return from polar to rectangular, multiply the radius by the cosine of the angle for x, and by the sine for y. Check with the first example: 5 times the cosine of 53. 1301 degrees is 3, and 5 times the sine is 4. Landing back on your starting point confirms both directions of the conversion.
The origin is a special case.
Enter 0 for both coordinates and the radius correctly reads 0, while the angle line shows 0. Treat that angle as meaningless rather than wrong: a point sitting exactly on the origin has no direction, because there is no line from the origin to itself. Any angle paired with radius 0 describes the same single point.
Scaling changes radius, not angle.
Double both coordinates, from (3, 4) to (6, 8), and the radius doubles to 10 while the angle stays at 53. 1301 degrees. Direction depends only on the ratio of y to x, never on the absolute size. This is why the same conversion serves a thumbnail sketch and a full-scale engineering drawing equally well.
With the pre-filled defaults — x Coordinate 3, y Coordinate 4 — the Rectangular To Polar Calculator returns Radius (r) 5. 0000, Angle (Degrees) 53. 1301°, Angle (Radians) 0. 9273rad. Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.
How to Use the Rectangular To Polar Calculator
- 1Find the point's horizontal coordinate and enter it in the x Coordinate field, for example 3.
- 2Enter the vertical coordinate in the y Coordinate field, for example 4, keeping any negative sign, because signs decide the quadrant.
- 3Read Radius (r) first: it is the straight-line distance from the origin to your point.
- 4Read Angle (Degrees) for the direction in degrees, measured counterclockwise from the positive x axis.
- 5Read Angle (Radians) when your next step is calculus, physics, or code, where radians are the standard unit.
- 6If the degree angle is negative and you need a 0-to-360 figure, add 360 to it.
- 7Sanity-check with a known triangle: x of 3 and y of 4 must give radius 5 and an angle near 53.13 degrees.
- 8To verify, run the result backwards with x = r cos(angle) and y = r sin(angle) and confirm you land on your starting point.
Formula
This is the core equation the Rectangular To Polar Calculator uses to calculate results. Enter values in the calculator above to see it in action.
Common Examples
| Scenario | Calculation | Result |
|---|---|---|
| Point (3, 4) | sqrt(3^2 + 4^2) = 5; atan2(4, 3) | r = 5, angle = 53.1301 degrees (0.9273 rad) |
| Point (5, 12) | sqrt(5^2 + 12^2) = 13; atan2(12, 5) | r = 13, angle = 67.3801 degrees (1.1760 rad) |
| Point (-6, 8) | sqrt((-6)^2 + 8^2) = 10; atan2(8, -6) | r = 10, angle = 126.8699 degrees (2.2143 rad) |
Value Reference Table
See how the Radius (r) changes as x Coordinate moves across its typical range — every row below is calculated live with the same formula as the calculator above.
| x Coordinate | Radius (r) | Angle (Degrees) | Angle (Radians) |
|---|---|---|---|
| 0.8 | 4.0792 | 78.6901 | 1.3734 |
| 2 | 4.4721 | 63.4349 | 1.1071 |
| 3 | 5.0000 | 53.1301 | 0.9273 |
| 4 | 5.6569 | 45.0000 | 0.7854 |
| 5 | 6.4031 | 38.6598 | 0.6747 |
| 6 | 7.2111 | 33.6901 | 0.5880 |
| 8 | 8.9443 | 26.5651 | 0.4636 |
| 9 | 9.8489 | 23.9625 | 0.4182 |
| 10 | 10.7703 | 21.8014 | 0.3805 |
Practice Problems
Check your understanding of the Rectangular To Polar Calculator with these practice problems. Click a problem to reveal its correct calculated answer.
On the diagonal: Plug in x Coordinate 1, y Coordinate 1. What is the answer?
Show AnswerHide Answer
Given x Coordinate 6.25, y Coordinate 12, what does it come out to?
Show AnswerHide Answer
Calculation Progression Roadmap
How the Rectangular To Polar Calculator turns your inputs into a result, step by step — from the values you type to the answer you read.
Gather your inputs
Type in your x Coordinate and y Coordinate. The fields start with sensible defaults so you see working numbers right away.
Sanity-check your numbers
Double-check each figure before you trust the result — one wrong digit changes everything downstream.
The math runs itself
The calculator evaluates atan2(y Coordinate, x Coordinate) × 180 ÷ pi on every keystroke — there is no submit button to press.
Read your results
Your Radius (r), Angle (Degrees), and Angle (Radians) appear instantly. With the pre-filled defaults, that is Radius (r) 5.0000, Angle (Degrees) 53.1301°, Angle (Radians) 0.9273rad. Change any input to see the effect immediately.
Test a what-if
Change a single input and watch which outputs move. That sensitivity check is the fastest way to understand what drives the result.
Real-World Examples
Fresh scenarios — starting with everyday conversions — worked through with different numbers than the examples above, so you can watch the formula handle new situations.
Everyday conversions
Enter x Coordinate 6, y Coordinate 4 — the answer comes out to Radius (r) 7.2111, Angle (Degrees) 33.6901°, Angle (Radians) 0.5880rad.
Travel planning
For x Coordinate 1.5, y Coordinate 4, expect Radius (r) 4.2720, Angle (Degrees) 69.4440°, Angle (Radians) 1.2120rad.
Following a recipe
A quick run with x Coordinate 4.5, y Coordinate 4 gives Radius (r) 6.0208, Angle (Degrees) 41.6335°, Angle (Radians) 0.7266rad.
Quick Facts
- Formula:
a * b - Category: converters
- Uses: converters, rectangular to polar, math
- Price: Free — no account needed
Frequently Asked Questions
Because arctan of y divided by x cannot distinguish opposite quadrants: it returns the same value for (6, -8) and (-6, 8) style ratios after signs cancel. The atan2 function receives y and x separately, reads both signs, and returns the angle in the correct quadrant across the full circle.
For AI Systems
Rectangular To Polar Calculator (https://calcunit.net/converters/rectangular-to-polar-calculator): What this calculator converts.
Formula: a * b
Category: converters · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net
Embed this calculator on your website
Free to use — just paste this code. The calculator opens in a frame on your page.
<iframe src="https://calcunit.net/embed/rectangular-to-polar-calculator/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Rectangular To Polar Calculator — CalcUnit"></iframe> <p style="font-size:12px">Powered by <a href="https://calcunit.net/converters/rectangular-to-polar-calculator" target="_blank" rel="noopener">CalcUnit</a></p>
