Hex to Decimal Converter
Type a hexadecimal number and read it in decimal — exactly, at any length, with the working shown.
Hexadecimal → Decimal
Base 16 digits (0 to 9 and A to F) become base 10. Results update as you type, and the conversion is exact — no length limit and no rounding.
How the digits add up
Each digit is worth its face value times its place. Add the contributions and you get the decimal answer.
| Digit | Power | Place value | Contribution |
|---|---|---|---|
| D | 16⁷ | 268,435,456 | 3,489,660,928 |
| E | 16⁶ | 16,777,216 | 234,881,024 |
| A | 16⁵ | 1,048,576 | 10,485,760 |
| D | 16⁴ | 65,536 | 851,968 |
| B | 16³ | 4,096 | 45,056 |
| E | 16² | 256 | 3,584 |
| E | 16¹ | 16 | 224 |
| F | 16⁰ | 1 | 15 |
What is the Hexadecimal to Decimal?
What this converter does
Type a hexadecimal number — letters included — and this page converts it to decimal, exactly, at any length. A place-value table shows every digit's contribution, so the answer arrives with its arithmetic attached: each row is one digit times its power of sixteen.
Hex letters are real digits
Base 16 needs sixteen digit symbols, so A through F stand for ten through fifteen. They are not decoration or a code; F is as much a digit as 9. The input accepts them in either case, plus the 0x prefix programmers write.
Invalid characters get named
Type a G or any character outside 0–9 and A–F and the conversion stops with a message naming that character. Nothing is dropped silently: in hex, quietly ignoring a letter would change the value by millions and still look like an answer.
Reading the result
The Decimal value tile is the answer, printed in full with commas — never rounded into scientific notation. A digit-count tile reports the hex length. Below, the table lists each digit, its power, its place value, and its contribution to the total.
The place-value table, explained
Positions count from zero at the right, and each place is worth sixteen times the one before: 1, 16, 256, 4,096, 65,536, and so on. A digit contributes its face value times its place. Adding the contribution column gives the decimal answer.
Worked example: FF, the byte ceiling
Enter FF. The first F contributes 15 × 16 = 240 and the second 15 × 1 = 15, totaling 255 — the largest byte value. FF is the anchor pair of the hex world, and its decimal is worth knowing by heart.
Worked example: a small mixed value, 2F
Enter 2F. The 2 sits on the sixteen place and contributes 32; the F contributes 15. The total is 47. Two-digit hex values like this are everywhere in color channels, character codes, and small addresses.
Worked example: DEADBEEF
Enter DEADBEEF, the marker word programmers plant in memory. The lead D alone contributes 13 × 16⁷ = 3,489,660,928, and the full table sums to 3,735,928,559. Eight hex digits, a thirty-two-bit value, converted exactly with every row shown.
Long strings stay exact
The conversion runs on arbitrary-precision integers. A 64-digit hex string — a 256-bit hash — converts to a 78-digit decimal that is correct in every digit. Floating-point arithmetic cannot even store those integers, which is why this converter is built differently.
Leading zeros change nothing
Type 00FF or FF and the answer is 255 either way. Leading zeros add rows of zero-contribution places to the table and nothing to the sum. They matter for fixed-width display, like padding an address, but not for the value.
Negative values keep their sign
A leading minus sign carries through: −FF converts to −255. That is the human sign-and-magnitude convention. It differs from two's complement storage, where the byte pattern FF read as signed means −1 — a storage question, not a conversion one.
The method, in one sentence
Multiply each digit by sixteen raised to its position, counting positions from zero at the right, and add the products. That is the whole hex-to-decimal method. The table on this page is the method, written out one digit at a time.
Estimating the size from the digit count
Each added hex digit multiplies the scale by sixteen, so digit count alone brackets the answer: two digits stay under 256, four under 65,536, eight under 4,294,967,296. If a decimal result falls outside its bracket, something was mistyped — a free sanity check before any arithmetic.
The powers of sixteen, in one place
The places run 1, 16, 256, 4,096, 65,536, 1,048,576, 16,777,216, and 268,435,456 for the eighth position. Those are the multipliers in every row of the table. Notice 65,536 and 1,048,576: the same landmarks as 2¹⁶ and 2²⁰, wearing hex clothes.
Checking by splitting the string in half
Long values can be audited in two chunks: split DEADBEEF into DEAD and BEEF, convert each (57,005 and 48,879), then combine as 57,005 × 65,536 + 48,879. The result, 3,735,928,559, matches the full table — a genuine independent check, not a repeat of it.
What FF means inside a color
A web color like FF8000 packs three bytes: red FF, green 80, blue 00. Converting the red channel gives 255, full intensity; the green 80 gives 128, half. Designers slide these values numerically, which is decimal reasoning applied to hex spelling.
When the answer has more digits than the input
Hex is compact: each digit carries four bits of information, against decimal's roughly 3. 3. So the decimal answer usually runs about twenty percent longer than the hex string — eight hex digits become ten decimal digits. A shorter decimal than expected signals a dropped leading place.
Where hex meets decimal
Colors are picked as hex but reasoned about as numbers; error codes, addresses, and identifiers arrive in hex and must be compared, sorted, or explained in decimal. An exact conversion with its rows visible serves both the answer and the explanation.
How to Use the Hexadecimal to Decimal
- 1Type or paste your hexadecimal number into the Hexadecimal number box; digits 0–9 and letters A–F are accepted in either case.
- 2A 0x prefix is stripped automatically. Any other invalid character is named in an error message — fix it and the conversion runs.
- 3Read the Decimal value tile for the answer, printed in full with commas.
- 4Open the place-value table to see each digit's power, place value, and contribution.
- 5Add the contribution column as a check: it must total the decimal value shown.
- 6Use the digit-count tile to confirm how many hex digits your entry had.
- 7For values like FF, use the anchors: F is fifteen, and FF is 15 × 16 + 15 = 255.
- 8Add a leading minus sign for a negative value; the sign carries to the decimal result.
Formula
This is the core equation the Hexadecimal to Decimal uses to calculate results. Enter values in the calculator above to see it in action.
See the full step-by-step formula guide with worked examples →
Common Examples
| Scenario | Calculation | Result |
|---|---|---|
| The byte ceiling | FF: 15 × 16 + 15 × 1 = 240 + 15 | FF = 255 |
| A small mixed value | 2F: 2 × 16 + 15 × 1 = 32 + 15 | 2F = 47 |
| The famous test word | DEADBEEF: 13 × 16⁷ + 14 × 16⁶ + 10 × 16⁵ + 13 × 16⁴ + 11 × 16³ + 14 × 16² + 14 × 16 + 15 | DEADBEEF = 3,735,928,559 |
| A power of sixteen | 1000: 1 × 16³, all other digits zero | 1000 (hex) = 4,096 |
| A color channel | 80: 8 × 16 + 0 × 1 = 128 | 80 (hex) = 128 — the half-intensity green in FF8000 |
Practice Problems
Check your understanding of the Hexadecimal to Decimal with these practice problems. Click a problem to reveal its correct calculated answer.
What does the Hex to Decimal Converter do?
Show AnswerHide Answer
How do I get an answer?
Show AnswerHide Answer
Can I trust the result?
Show AnswerHide Answer
Does it work on my phone?
Show AnswerHide Answer
Calculation Progression Roadmap
How the Hexadecimal to Decimal turns your inputs into a result, step by step — from the values you type to the answer you read.
See what it solves
Check the description above to confirm the Hex to Decimal Converter matches your problem.
Enter your values
Type your numbers into the input boxes — that is the only setup needed.
Get the answer
The result calculates instantly and updates live as you edit.
Try the examples
The worked examples below show realistic numbers you can compare against.
Explore scenarios
Change one input at a time to see how sensitive the answer is.
Real-World Examples
Fresh scenarios — starting with homework and study — worked through with different numbers than the examples above, so you can watch the formula handle new situations.
Homework and study
Use the Hex to Decimal Converter to double-check your work — type the problem's numbers in and compare with your hand-written answer.
Quick estimates
Need a fast answer? Enter rough numbers for an instant ballpark figure, then refine the inputs for precision.
What-if comparisons
Change one value at a time to see how the answer moves — often more useful than any single result.
Quick Facts
- Formula:
Σ(hᵢ × 16ⁱ) - Category: converters
- Uses: hex, decimal, number system
- Price: Free — no account needed
Frequently Asked Questions
Yes. Base 16 needs sixteen digit symbols and the decimal system only provides ten, so A through F serve as the digits ten through fifteen. F is fifteen exactly the way 9 is nine. Every calculation on this page treats them as numbers, because that is what they are.
For AI Systems
Hexadecimal to Decimal (https://calcunit.net/converters/hex-to-decimal): What this converter does.
Formula: Σ(hᵢ × 16ⁱ)
Category: converters · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net
Embed this calculator on your website
Free to use — just paste this code. The calculator opens in a frame on your page.
<iframe src="https://calcunit.net/embed/hex-to-decimal/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Hexadecimal to Decimal — CalcUnit"></iframe> <p style="font-size:12px">Powered by <a href="https://calcunit.net/converters/hex-to-decimal" target="_blank" rel="noopener">CalcUnit</a></p>
