Vector Subtraction Calculator
What is the Vector Subtraction Calculator?
What this calculator does
This page subtracts one three-component vector from another, component by component. You enter vector A and vector B, and the page returns the components of A - B, the components of B - A, and the length of the difference.
The two vectors you enter
Each vector is an ordered triple of numbers: an x component, a y component, and a z component. Vector A fills the first group of boxes and vector B the second. Components may be whole numbers, decimals, or negatives, in any mix.
How the subtraction works
Vectors subtract axis by axis, with no interaction between axes: A - B = (ax - bx, ay - by, az - bz). The x components meet only each other, and so do the y and z pairs. Three tiles report the three differences in order.
Both directions are shown
Subtraction is not commutative, so the page also reports B - A. Its components are the exact negatives of A - B: where one direction reads 3, the other reads -3. Having both tiles saves you from redoing the subtraction when a problem wants the reverse order.
The magnitude tile
The tile labeled Magnitude of A - B gives the length of the difference vector: sqrt((ax - bx) squared + (ay - by) squared + (az - bz) squared). Geometrically, it is the straight-line distance between the tips of A and B when both start at the origin.
Worked example with the page defaults
With A = (5, 3, 8) and B = (2, 1, 3), the components are 5 - 2 = 3, 3 - 1 = 2, and 8 - 3 = 5, so A - B = (3, 2, 5). Then B - A = (-3, -2, -5), and the magnitude is sqrt(9 + 4 + 25) = sqrt(38), about 6.
1644.
A second worked example
With A = (1, -4, 2) and B = (-3, 0, 6), the differences are 1 - (-3) = 4, -4 - 0 = -4, and 2 - 6 = -4, giving A - B = (4, -4, -4). The magnitude is sqrt(16 + 16 + 16) = sqrt(48), about 6. 9282.
Subtraction as a displacement
If A and B are position vectors of two points, then A - B is the displacement from the tip of B to the tip of A: the arrow you would travel to get from point B to point A. Its magnitude is the distance between the two points.
A displacement with whole numbers
From point B = (4, 4, 0) to point A = (10, 4, 0): A - B = (6, 0, 0) and the magnitude is exactly 6. Only the x coordinates differ, so the displacement runs parallel to the x axis and its length is just the x gap.
Subtracting a vector from itself
If A and B are identical, every difference is 0 and the magnitude tile reads 0: the zero vector. That is the vector analogue of a number minus itself, and it is a quick sanity check when you suspect the same values were entered twice.
Negative components are normal
Vectors in the third octant or pointing along negative axes carry negative components, and the subtraction handles signs by ordinary arithmetic. Subtracting a negative component adds its size: 1 - (-3) = 4 in the second worked example above is the typical trap, handled automatically.
Adding the negative instead
Subtraction can always be rewritten as A + (-B): flip every sign of B, then add component by component. The result is identical to A - B. This page subtracts directly, but the rewrite explains why the signs behave as they do when B's components are negative.
Two-dimensional vectors
For vectors in a plane, enter 0 for both z components. The z difference stays 0, the magnitude reduces to the two-dimensional distance formula, and the x and y tiles are exactly the plane subtraction you expect.
What the magnitude is not
The magnitude of A - B is not the difference of the magnitudes: |A - B| is generally not |A| - |B|. With the defaults, |A| is about 9. 8995 and |B| is about 3. 7417, whose difference is about 6. 1578, close to but not equal to the true 6. 1644.
Precision of the displayed values
Every tile is shown to four decimal places, with trailing zeros trimmed, so exact whole-number components display as whole numbers. Only the magnitude tile typically needs rounding, since it comes from a square root.
What this calculator does not do
It does not add vectors, scale them, or compute dot or cross products; each of those operations has its own page. It works with three components only, which covers standard textbook vectors and three-dimensional geometry.
Velocity differences and relative motion
Subtracting velocity vectors gives a relative velocity: how fast, and in which direction, one moving object appears to travel from another. If A is an aircraft's velocity and B is the wind's velocity, A - B is the velocity over the ground that navigation problems ask for.
Chaining several subtractions
Subtractions chain from left to right: A - B - C means (A - B) - C, subtracting C's components from the first difference. This page performs one subtraction per run, so work chained problems in passes, carrying the three difference components into the next run as the new A.
With the pre-filled defaults — A — x component 5, A — y component 3, A — z component 8, B — x component 2, B — y component 1, and 1 more more inputs — the Vector Subtraction Calculator returns A − B, x component 3. 0000, A − B, y component 2.
0000, A − B, z component 5. 0000, B − A, x component -3. 0000, and 3 more more results. Change any input and those results update instantly, so you can see exactly how each number you enter moves the answer.
How to Use the Vector Subtraction Calculator
- 1Enter A's x, y, and z components in the Vector A boxes.
- 2Enter B's x, y, and z components in the Vector B boxes.
- 3Use 0 for the z components if both vectors lie in a plane.
- 4Read the A - B tiles: ax - bx, ay - by, and az - bz.
- 5Read the B - A tiles if your problem needs the reverse direction.
- 6Read the Magnitude of A - B tile for the length of the difference.
- 7Interpret the result: A - B is the displacement from B's tip to A's tip.
- 8Sanity-check with a special case, such as B = 0, which must return A itself.
Formula
This is the core equation the Vector Subtraction Calculator uses to calculate results. Enter values in the calculator above to see it in action.
Common Examples
| Scenario | Calculation | Result |
|---|---|---|
| Page defaults | A = (5, 3, 8), B = (2, 1, 3): differences are 5 - 2 = 3, 3 - 1 = 2, 8 - 3 = 5; magnitude sqrt(9 + 4 + 25) = sqrt(38) | A - B = (3, 2, 5), B - A = (-3, -2, -5), |A - B| = 6.1644 |
| Negative components on both sides | A = (1, -4, 2), B = (-3, 0, 6): differences are 1 - (-3) = 4, -4 - 0 = -4, 2 - 6 = -4; magnitude sqrt(48) | A - B = (4, -4, -4), B - A = (-4, 4, 4), |A - B| = 6.9282 |
| Displacement between two points | A = (10, 4, 0), B = (4, 4, 0): differences are 6, 0, 0; magnitude sqrt(36) = 6 | A - B = (6, 0, 0), B - A = (-6, 0, 0), |A - B| = 6 |
| Identical vectors | A = (3, 3, 3), B = (3, 3, 3): every difference is 3 - 3 = 0; magnitude sqrt(0) = 0 | A - B = (0, 0, 0), B - A = (0, 0, 0), |A - B| = 0 |
Value Reference Table
See how the A − B, x component changes as A — x component moves across its typical range — every row below is calculated live with the same formula as the calculator above.
| A — x component | A − B, x component | A − B, y component | A − B, z component | B − A, x component | B − A, y component | B − A, z component | Magnitude of A − B, |A − B| |
|---|---|---|---|---|---|---|---|
| 1 | -1.0000 | 2.0000 | 5.0000 | 1.0000 | -2.0000 | -5.0000 | 5.4772 |
| 3 | 1.0000 | 2.0000 | 5.0000 | -1.0000 | -2.0000 | -5.0000 | 5.4772 |
| 4 | 2.0000 | 2.0000 | 5.0000 | -2.0000 | -2.0000 | -5.0000 | 5.7446 |
| 5 | 3.0000 | 2.0000 | 5.0000 | -3.0000 | -2.0000 | -5.0000 | 6.1644 |
| 6 | 4.0000 | 2.0000 | 5.0000 | -4.0000 | -2.0000 | -5.0000 | 6.7082 |
| 8 | 6.0000 | 2.0000 | 5.0000 | -6.0000 | -2.0000 | -5.0000 | 8.0623 |
| 10 | 8.0000 | 2.0000 | 5.0000 | -8.0000 | -2.0000 | -5.0000 | 9.6437 |
| 20 | 18.0000 | 2.0000 | 5.0000 | -18.0000 | -2.0000 | -5.0000 | 18.7883 |
Practice Problems
Check your understanding of the Vector Subtraction Calculator with these practice problems. Click a problem to reveal its correct calculated answer.
A = (5, 3, 8), B = (2, 1, 3) → A − B = (3, 2, 5): Plug in A — x component 5, A — y component 3, A — z component 8, B — x component 2, B — y component 1, and 1 more more inputs. What is the answer?
Show AnswerHide Answer
Given A — x component 1.25, A — y component -4, A — z component 2, B — x component -3, B — y component 0, and 1 more more inputs, what does it come out to?
Show AnswerHide Answer
Calculation Progression Roadmap
How the Vector Subtraction Calculator turns your inputs into a result, step by step — from the values you type to the answer you read.
Gather your inputs
Type in your A — x component, A — y component, A — z component, B — x component, B — y component, and 1 more more. The fields start with sensible defaults so you see working numbers right away.
Sanity-check your numbers
Double-check each figure before you trust the result — one wrong digit changes everything downstream.
The math runs itself
The calculator evaluates A — x component - B — x component on every keystroke — there is no submit button to press.
Read your results
Your A − B, x component, A − B, y component, A − B, z component, B − A, x component, B − A, y component, and 2 more more appear instantly. With the pre-filled defaults, that is A − B, x component 3.0000, A − B, y component 2.0000, A − B, z component 5.0000, B − A, x component -3.0000, and 3 more more results. Change any input to see the effect immediately.
Test a what-if
Change a single input and watch which outputs move. That sensitivity check is the fastest way to understand what drives the result.
Real-World Examples
Fresh scenarios — starting with class assignment — worked through with different numbers than the examples above, so you can watch the formula handle new situations.
Class assignment
Enter A — x component 10, A — y component 3, A — z component 8, B — x component 2, B — y component 1, and 1 more more inputs — the answer comes out to A − B, x component 8.0000, A − B, y component 2.0000, A − B, z component 5.0000, B − A, x component -8.0000, and 3 more more results.
Homework check
For A — x component 2.5, A — y component 3, A — z component 8, B — x component 2, B — y component 1, and 1 more more inputs, expect A − B, x component 0.5000, A − B, y component 2.0000, A − B, z component 5.0000, B − A, x component -0.5000, and 3 more more results.
Step-by-step practice
A quick run with A — x component 7.5, A — y component 3, A — z component 8, B — x component 2, B — y component 1, and 1 more more inputs gives A − B, x component 5.5000, A − B, y component 2.0000, A − B, z component 5.0000, B − A, x component -5.5000, and 3 more more results.
Quick Facts
- Formula:
a - b - Category: algebra
- Uses: algebra, vector subtraction, math
- Price: Free — no account needed
Frequently Asked Questions
Yes. A - B and B - A point in opposite directions: every component of one is the negative of the other, as the paired tiles on this page show. Their magnitudes are identical, since length ignores direction. Always subtract in the order the problem states.
For AI Systems
Vector Subtraction Calculator (https://calcunit.net/algebra/vector-subtraction-calculator): What this calculator does.
Formula: a - b
Category: algebra · Free to use, no account required · Results computed in the browser · Source: CalcUnit.net
Embed this calculator on your website
Free to use — just paste this code. The calculator opens in a frame on your page.
<iframe src="https://calcunit.net/embed/vector-subtraction-calculator/" width="100%" height="560" style="border:1px solid #DEE2EA;border-radius:12px" loading="lazy" title="Vector Subtraction Calculator — CalcUnit"></iframe> <p style="font-size:12px">Powered by <a href="https://calcunit.net/algebra/vector-subtraction-calculator" target="_blank" rel="noopener">CalcUnit</a></p>
